Texas Instruments TMS320DM6446 DVEVM v2.0 manual Installing the A/V Demo Files

Installing the Software

When the installer prompts for an installation location, do not use the default location. Instead, use the entire path to the dvsdk_#_# codegen directory. You will need to manually create the folder cg6x_6_#_#, where # represents part of the version number. For example:

/home/<useracct>/dvsdk_#_#/cg6x_6_0_16.

Remember to set the environment variable as directed by the installer. For example:

C6X_C_DIR="/home/<useracct>/dvsdk_#_#/cg6x_6_#_#/include: /home/<useracct>/dvsdk_#_#/cg6x_6_#_#/lib"

6)You can now delete the .bin files that you loaded into the temporary directory.

Note: You can uninstall these components by using the rm -rfcommand on its directory. You should ignore the uninstall files created by the installer.

4.3.3Installing the A/V Demo Files

Disk 2 contains the A/V files used by the demos. After following the instructions in the previous section, follow these instructions to install the A/V files:

1) Go to the DVSDK directory that you set up previously. For example:

host $ cd /home/<useracct>/dvsdk_#_#

2)Mount disk 2 and copy the data.tar.gz file to your DVEVM directory. For example:

host $ cp <mount location>/data.tar.gz .

3)Extract the A/V data files. For example:

host $ tar xfz data.tar.gz

4-8