Runco CR-26HD, CR-32HDi, High-Definition manual Key 0002

Serial Communications

Table 6-1. Serial Commands (continued)

Command

Description

The following serial commands are meant to emulate buttons on the remote control. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.

Each command begins with [key followed by the four-digit number of the button. No carriage return is necessary. The response you receive from the unit if the command is valid will be a right-bracket (]) followed by the four-digit numeric code you sent. (For example, the ‘ON’ com- mand is [key0015; the response will be ]0015). All commands are in ASCII.

[

[

[

[

[

[

key	0002	OFF
	0015	ON
key	0004	Number 1
	0005	Number 2
	0006	Number 3
	0008	Number 4
	0009	Number 5
	0010	Number 6
	0012	Number 7
	0013	Number 8
	0014	Number 9
	0017	Number 0
	0035	Number 100
	0023	Number “–”
key	0001	TIMER OFF
key	0105	INPUT1
	0027	INPUT2
	0028	INPUT3
	0102	DVI
	0101	RGB HD
	0019	TV
key	0003	CUSTOM
	0062	ISF NIGHT
	0031	ISF DAY
key	0040	ANAMORPHIC

Runco CR-26HD/CR-32HDi Owner’s Operating Manual 51