Sharp PG-F325W specifications Mail Recipient Settings, Occurs Service & Support Access URL

Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs

(Mail – Recipient Settings)

Controlling the Projector via LAN

Setting Error Items and the URL that are to be Displayed when an Error

Occurs (Service & Support –

Access URL)

On this screen, you can input e-mail destina- tions to which error notification (error items) e-mails are sent.

Items	Description
E-mail	Set addresses to which error
Address	notification e-mail is sent. You
	can set up to five addresses.
Error Mail	Error e-mail is sent on the error
(Lamp, Temp,	items checked in their check
Fan,Cover)	boxes.
Test	Send test e-mail. This allows
	you to confirm that the settings
	for e-mail transmission are
	properly set.

Note

•E-mail Address can be up to 64 characters.

•You can input the characters below :

a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, , }, ~, _, ’, ., @, `

(You can input “@” only one time.)

•For details about error items, refer to the projector’s operation manual.

On this screen, you can make settings of the URL and error items that are to be displayed when the projector has generated an error.

Items	Description
Access	Set the URL that is to be
URL	displayed when an error
	occurs. You can set up to five
	addresses.
Condition	The URL is displayed when an
(Always, Lamp,	error checked in their check
Temp, Fan,Cover)	boxes occurs.
Test	The set URL site is test-
	displayed. This allows you to
	confirm that the URL site is
	properly displayed.

Example of the display when an error occurs

-19