Sharp PG-D45X3D quick start Turning the Projector On/Off

Page 30

Turning the Projector On/Off

Turning the Projector On

Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 21 to 25.)

Open the lens shutter fully and press STANDBY/ON on the projector or ON on the remote control.

•The power indicator illuminates green.

•After the lamp indicator illuminates, the projector is ready to start operation.

Note

•About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up.

Red: The lamp is shut down abnormally or the lamp should be replaced.

•When switching on the projector, a slight

fl ickering of the image may be experienced within the fi rst minute after the lamp has been illuminated. This is normal operation as the lamp's control circuitry is stabilising the lamp output characteristics. It should not be regarded as faulty operation.

•If the projector is put into Standby mode and immediately turned on again, the lamp may take some time to start projection.

•When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 46 for details.

Turning the Power Off (Putting the Projector into Standby Mode)

Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into Standby mode.

• The projector cannot be turned on while cooling.

Info

•When “Auto Restart” is set to “On”:

If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. (See page 45.)

•English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 44.

Power indicator

STANDBY/ON button

Lamp indicator

STANDBY button

ON button

On-screen display (confirmation message)

Info

•Direct Power Off function:

You can unplug the power cord from the AC outlet even if the cooling fan is still running.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents PG-D45X3D Model No Serial No Iii Page See bottom of projector Information Product Disposal For Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual For WindowsFor Macintosh Accessories Optional accessoriesRCA to mini D-sub 15 pin cable 10 n 3.0 m Adjust lever Part Names and FunctionsProjector Using the Carrying Handle Using the Kensington LockRear View Button32 ButtonRemote control signal transmitters Inserting the BatteriesUsable Range Quick Start Setup and ProjectionAdjust lever Zoom ring Focus ringCorrect trapezoidal distortion Projector ControlSetting up the Projector Setting up the ProjectorVideo Setup Standard Setup Front ProjectionProjection PRJ Mode Example 43 Signal Input Normal Mode Picture SizeDistance Signal Input Normal Mode Signal Input Stretch ModeScreen Size and Projection Distance Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord To AC outlet Supplied Turning the Projector On/Off Turning the Projector OnAdjusting the Picture Size Adjusting the Projected Image Adjusting the FocusAdjusting the Height Image ProjectionCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press KeystoneVIDEO, Video buttons AV Mute button VOL +/- Volume buttons Switching the Input ModeAdjusting the Volume On-screen displayResize Mode Press ResizeAbout Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Items you can set with the Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press MENU/HELPPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Selecting the Background Image DLP LinkTM DLP LinkTM Invert Setting the Video SetupClosed Caption Reversing/Inverting Projected ImagesStandby Mode Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionFan Mode Setting Audio Output Type SettingSpeaker Setting Selecting the Transmission Speed RS-232CEnter the same keycode in Re- confirm When the System Lock is setChecking the Lamp Life Status Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Enter the same password in Reconfirm, then press Enter Setting a PasswordSelect Password, then press Enter or Q On the projector, pressTCP/IP Setting Setting up the Projector Network Environment Network MenuDhcp Client Setting Enter IP Address using P, R, Q O, then press EnterUtilizing the Help Menu Functions Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Press EnterCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit Resetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 For Sharp Assistance Specifications PG-D45X3DDimensions Index

PG-D45X3D specifications

The Sharp PG-D45X3D is a state-of-the-art 3D capable projector, designed to deliver an exceptional viewing experience for both home and professional environments. This projector stands out due to its ability to present 3D content with clarity and vibrant colors, making it an outstanding choice for those who wish to enjoy immersive multimedia experiences.

One of the main features of the PG-D45X3D is its impressive brightness level, providing up to 4500 ANSI lumens. This brightness ensures that images remain visible and clear even in well-lit rooms, which is essential for both presentations and movie viewing. The projector also boasts a native resolution of 1024 x 768 (XGA), which allows for sharp and detailed image reproduction, making it suitable for a wide range of content, from educational presentations to cinematic experiences.

The PG-D45X3D employs DLP (Digital Light Processing) technology, known for its reliability and high-quality images. This technology enables the projector to deliver deep blacks and bright whites, ensuring a dynamic contrast that enhances the viewing experience. Additionally, the projector supports 3D viewing, allowing users to experience their favorite films and games in a whole new dimension, perfect for gaming enthusiasts and 3D movie lovers alike.

Connectivity options are abundant with the PG-D45X3D. It includes multiple inputs such as HDMI, VGA, and composite video, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and gaming consoles. This flexibility allows users to easily connect their devices without the need for additional adapters.

Another notable characteristic of the Sharp PG-D45X3D is its compact design, which makes it easy to transport and set up in various environments. Whether used in classrooms, conference rooms, or home theaters, this projector can adapt seamlessly to its surroundings.

In terms of longevity, the PG-D45X3D features a long-lasting lamp life of up to 4000 hours in standard mode and up to 6000 hours in eco mode. This durability reduces the frequency of lamp replacements, thereby lowering maintenance costs and ensuring uninterrupted use.

In conclusion, the Sharp PG-D45X3D is a versatile, high-performing projector that combines high brightness, advanced DLP technology, and 3D capabilities. Its diverse connectivity options and compact design make it an ideal choice for a wide range of applications, catering to users looking for quality performance and value.
Top Page Image Contents