Sharp PG-D45X3D quick start Maintenance, Cleaning the projector, Cleaning the lens

Page 56

Maintenance

Cleaning the projector

■Ensure that you have unplugged the power cord before cleaning the projector.

■The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the fi nish on the cabinet.

■Do not use volatile agents such as insecticides on the projector.

Do not attach rubber or plastic items to the projector for long periods.

The effects of some of the agents in the plastic may cause damage to the quality or fi nish of the projector.

■Wipe off dirt gently with a soft fl annel cloth.

■When the dirt is hard to remove, soak a cloth in a mild detergent diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before use.

Cleaning the lens

■Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating fi lm on the surface of the lens.

■As the surface of the lens can easily get damaged, be careful not to scrape or hit the lens.

Cleaning the exhaust and intake vents

■Use a vacuum cleaner to clean dust from the exhaust vent and the intake vent.

Wax

Mild detergent diluted

with water

Thinner

Info

•If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into Standby mode. After the cooling fan has stopped, clean the vents.

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents PG-D45X3D Model No Serial No Iii Page See bottom of projector Information Product Disposal For Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsFor Macintosh When you want to view the Setup ManualFor Windows RCA to mini D-sub 15 pin cable 10 n 3.0 m AccessoriesOptional accessories Projector Adjust leverPart Names and Functions Rear View Using the Carrying HandleUsing the Kensington Lock Button32 ButtonUsable Range Remote control signal transmittersInserting the Batteries Setup and Projection Adjust leverQuick Start Zoom ring Focus ringCorrect trapezoidal distortion Projector ControlSetting up the Projector Video SetupSetting up the Projector Standard Setup Front ProjectionDistance Projection PRJ ModeExample 43 Signal Input Normal Mode Picture Size Screen Size and Projection Distance Signal Input Normal ModeSignal Input Stretch Mode Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer AC socket Power cord To AC outlet Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable Turning the Projector On/Off Turning the Projector OnAdjusting the Projected Image Adjusting the Focus Adjusting the HeightAdjusting the Picture Size Image ProjectionPress Keystone to enter the Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeVIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen displayResize Mode Press ResizeAbout Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Items you can set with the Help menu Help menu nUsing the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press MENU/HELPTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueEco+Quiet ProgressiveReducing Image Noise DNR Adjusting the Projected Image SCR ADJ Menu DLP LinkTM DLP LinkTM Invert Setting the Video Setup Closed CaptionSelecting the Background Image Reversing/Inverting Projected ImagesAuto Sync Auto Sync Adjustment Auto Power Off FunctionStandby Mode Auto Restart FunctionAudio Output Type Setting Speaker SettingFan Mode Setting Selecting the Transmission Speed RS-232CWhen the System Lock is set Checking the Lamp Life StatusEnter the same keycode in Re- confirm Input screen for keycodeTaking the Keylock off Keylock FunctionLocking the Operation Buttons Setting a Password Select Password, then press Enter or QEnter the same password in Reconfirm, then press Enter On the projector, pressSetting up the Projector Network Environment Network Menu Dhcp Client SettingTCP/IP Setting Enter IP Address using P, R, Q O, then press EnterTroubleshooting with the Help Menu Enter button Adjustment buttons P/R/O/Q MENU/HELP buttonUtilizing the Help Menu Functions Press EnterMaintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Lamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 For Sharp Assistance Specifications PG-D45X3DDimensions Index

PG-D45X3D specifications

The Sharp PG-D45X3D is a state-of-the-art 3D capable projector, designed to deliver an exceptional viewing experience for both home and professional environments. This projector stands out due to its ability to present 3D content with clarity and vibrant colors, making it an outstanding choice for those who wish to enjoy immersive multimedia experiences.

One of the main features of the PG-D45X3D is its impressive brightness level, providing up to 4500 ANSI lumens. This brightness ensures that images remain visible and clear even in well-lit rooms, which is essential for both presentations and movie viewing. The projector also boasts a native resolution of 1024 x 768 (XGA), which allows for sharp and detailed image reproduction, making it suitable for a wide range of content, from educational presentations to cinematic experiences.

The PG-D45X3D employs DLP (Digital Light Processing) technology, known for its reliability and high-quality images. This technology enables the projector to deliver deep blacks and bright whites, ensuring a dynamic contrast that enhances the viewing experience. Additionally, the projector supports 3D viewing, allowing users to experience their favorite films and games in a whole new dimension, perfect for gaming enthusiasts and 3D movie lovers alike.

Connectivity options are abundant with the PG-D45X3D. It includes multiple inputs such as HDMI, VGA, and composite video, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and gaming consoles. This flexibility allows users to easily connect their devices without the need for additional adapters.

Another notable characteristic of the Sharp PG-D45X3D is its compact design, which makes it easy to transport and set up in various environments. Whether used in classrooms, conference rooms, or home theaters, this projector can adapt seamlessly to its surroundings.

In terms of longevity, the PG-D45X3D features a long-lasting lamp life of up to 4000 hours in standard mode and up to 6000 hours in eco mode. This durability reduces the frequency of lamp replacements, thereby lowering maintenance costs and ensuring uninterrupted use.

In conclusion, the Sharp PG-D45X3D is a versatile, high-performing projector that combines high brightness, advanced DLP technology, and 3D capabilities. Its diverse connectivity options and compact design make it an ideal choice for a wide range of applications, catering to users looking for quality performance and value.
Top Page Image Contents