Sharp PG-D45X3D Audio Output Type Setting, Speaker Setting, Fan Mode Setting, Audio Input

Page 50

Adjusting the Projector Function (“PRJ - ADJ” Menu) (Continued)

Menu operation n Page 38

6 Audio Output Type Setting

This function determines whether the audio level output from the AUDIO output (MONITOR output) terminal is fixed or variable by linking with VOLUME.

Selectable

Description

items

 

 

 

FAO

Audio output that does not vary in

(Fixed Audio

strength with the volume level of the

Output)

source projector.

 

 

VAO

Audio output that varies in strength

(Variable

with the volume level of the source

Audio

projector.

Output)

 

Info

•When “Audio Out” has been set to “VAO”, fi rst make sure to lower the volume of the projector before turning the power on or off and when switching the input.

7 Speaker Setting

Selectable

Description

items

 

 

 

On

The audio signal is output from the

 

internal speaker.

 

 

Off

The audio signal is not output from the

 

internal speaker.

 

 

9 Selecting the Transmission

Speed (RS-232C)

Make sure that both the projector and computer are set for the same baud rate.

Selectable

Description

items

 

 

 

 

 

9600bps

Transmission speed is slow.

38400bps

 

 

 

 

115200bps

Transmission speed is rapid.

 

 

 

 

0 Fan Mode Setting

This function changes the fan rotation speed.

Selectable

Description

items

 

 

 

Normal

Suitable for normal environments.

 

 

High

Set when using the projector at

 

altitudes of approximately 1,500 meters

 

(4,900 feet) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

System Lock Function

This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.

8 Audio Input

This function allows you to select an appropriate combination of audio input terminals for each Input mode.

Selectable

Description

items

 

 

 

Audio 1

The AUDIO 1 input terminal is used as

 

an audio input terminal.

 

 

Audio 2

The AUDIO 2 input terminal is used as

 

an audio input terminal.

 

 

Info

•If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will incur a charge.

a Setting/Changing the keycode

1 Select “System Lock”, then press

ENTER or Q.

2Select “Next”, then press ENTER.

•The screen for entering the keycode appears.

46

Page 49 Page 51
Image 50
Page 49 Page 51
Contents PG-D45X3D Model No Serial No Iii Page See bottom of projector Information Product Disposal For Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsFor Macintosh When you want to view the Setup ManualFor Windows RCA to mini D-sub 15 pin cable 10 n 3.0 m AccessoriesOptional accessories Projector Adjust leverPart Names and Functions Rear View Using the Carrying HandleUsing the Kensington Lock Button32 ButtonUsable Range Remote control signal transmittersInserting the Batteries Quick Start Setup and ProjectionAdjust lever Zoom ring Focus ringCorrect trapezoidal distortion Projector ControlSetting up the Projector Setting up the ProjectorVideo Setup Standard Setup Front ProjectionDistance Projection PRJ ModeExample 43 Signal Input Normal Mode Picture Size Screen Size and Projection Distance Signal Input Normal ModeSignal Input Stretch Mode Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer AC socket Power cord To AC outlet Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable Turning the Projector On/Off Turning the Projector OnAdjusting the Picture Size Adjusting the Projected Image Adjusting the FocusAdjusting the Height Image ProjectionCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press KeystoneVIDEO, Video buttons AV Mute button VOL +/- Volume buttons Switching the Input ModeAdjusting the Volume On-screen displayResize Mode Press ResizeAbout Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Items you can set with the Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press MENU/HELPPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueEco+Quiet ProgressiveReducing Image Noise DNR Adjusting the Projected Image SCR ADJ Menu Selecting the Background Image DLP LinkTM DLP LinkTM Invert Setting the Video SetupClosed Caption Reversing/Inverting Projected ImagesStandby Mode Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionFan Mode Setting Audio Output Type SettingSpeaker Setting Selecting the Transmission Speed RS-232CEnter the same keycode in Re- confirm When the System Lock is setChecking the Lamp Life Status Input screen for keycodeTaking the Keylock off Keylock FunctionLocking the Operation Buttons Enter the same password in Reconfirm, then press Enter Setting a PasswordSelect Password, then press Enter or Q On the projector, pressTCP/IP Setting Setting up the Projector Network Environment Network MenuDhcp Client Setting Enter IP Address using P, R, Q O, then press EnterUtilizing the Help Menu Functions Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Press EnterCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Lamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 For Sharp Assistance Specifications PG-D45X3DDimensions Index

PG-D45X3D specifications

The Sharp PG-D45X3D is a state-of-the-art 3D capable projector, designed to deliver an exceptional viewing experience for both home and professional environments. This projector stands out due to its ability to present 3D content with clarity and vibrant colors, making it an outstanding choice for those who wish to enjoy immersive multimedia experiences.

One of the main features of the PG-D45X3D is its impressive brightness level, providing up to 4500 ANSI lumens. This brightness ensures that images remain visible and clear even in well-lit rooms, which is essential for both presentations and movie viewing. The projector also boasts a native resolution of 1024 x 768 (XGA), which allows for sharp and detailed image reproduction, making it suitable for a wide range of content, from educational presentations to cinematic experiences.

The PG-D45X3D employs DLP (Digital Light Processing) technology, known for its reliability and high-quality images. This technology enables the projector to deliver deep blacks and bright whites, ensuring a dynamic contrast that enhances the viewing experience. Additionally, the projector supports 3D viewing, allowing users to experience their favorite films and games in a whole new dimension, perfect for gaming enthusiasts and 3D movie lovers alike.

Connectivity options are abundant with the PG-D45X3D. It includes multiple inputs such as HDMI, VGA, and composite video, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and gaming consoles. This flexibility allows users to easily connect their devices without the need for additional adapters.

Another notable characteristic of the Sharp PG-D45X3D is its compact design, which makes it easy to transport and set up in various environments. Whether used in classrooms, conference rooms, or home theaters, this projector can adapt seamlessly to its surroundings.

In terms of longevity, the PG-D45X3D features a long-lasting lamp life of up to 4000 hours in standard mode and up to 6000 hours in eco mode. This durability reduces the frequency of lamp replacements, thereby lowering maintenance costs and ensuring uninterrupted use.

In conclusion, the Sharp PG-D45X3D is a versatile, high-performing projector that combines high brightness, advanced DLP technology, and 3D capabilities. Its diverse connectivity options and compact design make it an ideal choice for a wide range of applications, catering to users looking for quality performance and value.
Top Page Image Contents