Sharp PG-D45X3D Setting up the Projector Network Environment Network Menu, Dhcp Client Setting

Page 54

Setting up the Projector Network Environment (“Network” Menu) (Continued)

Menu operation n Page 38

2 DHCP Client Setting

Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.

Selectable items

Description

 

 

On

Obtains confi guration

 

parameters for TCP/IP network

 

automatically.

 

 

Off

Sets the TCP/IP manually.

Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.

If the DHCP server is not available, “Could not obtain IP Address.” appears.

In this case, set the TCP/IP manually. (See the item 3.)

3 TCP/IP Setting

Set the TCP/IP manually.

1 Select “Off” for “DHCP Client”, then press ENTER.

2 Select “TCP/IP”, then press

ENTER.

 

3

 

 

 

 

 

Enter “IP Address” using P, R, Q

 

 

 

 

 

 

 

 

 

 

 

 

 

and O, then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Network

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting the TCP/IP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

1

9

 

2

 

.

1 6 8

. 1 5 0

. 0 0 2

 

 

 

 

 

 

 

 

 

 

 

 

Subnet Mask

2 5 5

. 2 5 5

. 2 5 5

. 0 0 0

 

 

 

 

 

 

 

 

 

 

 

 

Gateway

0 0 0

. 0 0 0

. 0 0 0

. 0 0 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter “Subnet Mask” using P, R,

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Q and O, then press ENTER.

 

5 Enter “Gateway” using P, R, Q and O, then press ENTER.

Selectable items

Description

 

 

IP Address

Factory default setting:

 

192.168.150.002

 

Enter an IP address

 

appropriate for the network.

 

 

Subnet Mask

Factory default setting:

 

255.255.255.000

 

Set the subnet mask to the

 

same as that of the computer

 

and equipment on the

 

network.

 

 

Gateway

Factory default setting:

 

000. 000. 000. 000

 

* When not in use, set to “000.

 

000. 000. 000”.

 

 

Note

•Confi rm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don't have to change the projector IP address.

•For details about each setting, consult your network administrator.

4Confirming the Projector Information

You can confirm the MAC address and projector name.

Selectable items

Description

 

 

MAC Address

The MAC address of the

 

projector is displayed.

 

 

Projector

The projector name is

 

displayed.

 

 

Note

•For information on how to change the projector name, see “SETUP MANUAL” contained in the supplied CD-ROM.

50

Page 53 Page 55
Image 54
Page 53 Page 55
Contents PG-D45X3D Model No Serial No Iii Page See bottom of projector Information Product Disposal For Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual For WindowsFor Macintosh Accessories Optional accessoriesRCA to mini D-sub 15 pin cable 10 n 3.0 m Adjust lever Part Names and FunctionsProjector Using the Carrying Handle Using the Kensington LockRear View Button32 ButtonRemote control signal transmitters Inserting the BatteriesUsable Range Quick Start Setup and ProjectionAdjust lever Zoom ring Focus ringCorrect trapezoidal distortion Projector ControlSetting up the Projector Setting up the ProjectorVideo Setup Standard Setup Front ProjectionProjection PRJ Mode Example 43 Signal Input Normal Mode Picture SizeDistance Signal Input Normal Mode Signal Input Stretch ModeScreen Size and Projection Distance Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord To AC outlet Supplied Turning the Projector On/Off Turning the Projector OnAdjusting the Picture Size Adjusting the Projected Image Adjusting the FocusAdjusting the Height Image ProjectionCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press KeystoneVIDEO, Video buttons AV Mute button VOL +/- Volume buttons Switching the Input ModeAdjusting the Volume On-screen displayResize Mode Press ResizeAbout Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Items you can set with the Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press MENU/HELPPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Selecting the Background Image DLP LinkTM DLP LinkTM Invert Setting the Video SetupClosed Caption Reversing/Inverting Projected ImagesStandby Mode Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionFan Mode Setting Audio Output Type SettingSpeaker Setting Selecting the Transmission Speed RS-232CEnter the same keycode in Re- confirm When the System Lock is setChecking the Lamp Life Status Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Enter the same password in Reconfirm, then press Enter Setting a PasswordSelect Password, then press Enter or Q On the projector, pressTCP/IP Setting Setting up the Projector Network Environment Network MenuDhcp Client Setting Enter IP Address using P, R, Q O, then press EnterUtilizing the Help Menu Functions Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Press EnterCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit Resetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 For Sharp Assistance Specifications PG-D45X3DDimensions Index

PG-D45X3D specifications

The Sharp PG-D45X3D is a state-of-the-art 3D capable projector, designed to deliver an exceptional viewing experience for both home and professional environments. This projector stands out due to its ability to present 3D content with clarity and vibrant colors, making it an outstanding choice for those who wish to enjoy immersive multimedia experiences.

One of the main features of the PG-D45X3D is its impressive brightness level, providing up to 4500 ANSI lumens. This brightness ensures that images remain visible and clear even in well-lit rooms, which is essential for both presentations and movie viewing. The projector also boasts a native resolution of 1024 x 768 (XGA), which allows for sharp and detailed image reproduction, making it suitable for a wide range of content, from educational presentations to cinematic experiences.

The PG-D45X3D employs DLP (Digital Light Processing) technology, known for its reliability and high-quality images. This technology enables the projector to deliver deep blacks and bright whites, ensuring a dynamic contrast that enhances the viewing experience. Additionally, the projector supports 3D viewing, allowing users to experience their favorite films and games in a whole new dimension, perfect for gaming enthusiasts and 3D movie lovers alike.

Connectivity options are abundant with the PG-D45X3D. It includes multiple inputs such as HDMI, VGA, and composite video, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and gaming consoles. This flexibility allows users to easily connect their devices without the need for additional adapters.

Another notable characteristic of the Sharp PG-D45X3D is its compact design, which makes it easy to transport and set up in various environments. Whether used in classrooms, conference rooms, or home theaters, this projector can adapt seamlessly to its surroundings.

In terms of longevity, the PG-D45X3D features a long-lasting lamp life of up to 4000 hours in standard mode and up to 6000 hours in eco mode. This durability reduces the frequency of lamp replacements, thereby lowering maintenance costs and ensuring uninterrupted use.

In conclusion, the Sharp PG-D45X3D is a versatile, high-performing projector that combines high brightness, advanced DLP technology, and 3D capabilities. Its diverse connectivity options and compact design make it an ideal choice for a wide range of applications, catering to users looking for quality performance and value.
Top Page Image Contents