Sharp PG-M10X operation manual Using the Remote Control Input Selection, After using the unit

Page 22

Using the Remote Control (Input Selection)

Basic Operation

Using the unit (continued)

After using the unit

1 Press the POWER ON/OFF button of the remote control or the POWER ON/OFF button of the main unit for a few seconds.

The power will turn off and the POWER indicator will blink orange for 1 min., then the standby status will be activated. (The cooling fan will continue to run for a while for cooling purposes.)

Do not unplug the power cord while the indicator is blinking.

MOUSE

 

POWER STA

 

ON/OFF

 

MENU

ON/OFF

 

 

VIDEO

 

COMPUTER

 

R-CLICK/EXIT

 

Blinks orange (1 min.)

Illuminates orange

The POWER ON/OFF button of the remote control and main unit will not operate until the blinking stops.

After the standby status is activated, wait 1 min. or more before turning the power on again. The power will not turn on until the 1 min. interval has elapsed.

The cooling fan will continue to run even in standby status.

2 Disconnect the power cord.

The POWER indicator will turn off.

Using the Remote Control (Input Selection)

MOUSEON/OFF

MENU

VIDEOCOMPUTER

VIDEO button R-CLICK/EXIT COMPUTER button

Operating from the main unit

Inputs can be selected not only by operating the remote control but also by using the projector’s INPUT SELECT button.

POWER STATUS

ON/OFF

INPUT SELECT AUTO SYNC

INPUT SELECT button

1 Press the VIDEO button.

The video signal (VIDEO, S-VIDEO) connected to the input terminal of this unit will be detected and projected automatically. If a video signal is not detected, the message NO SIGNAL will be displayed.

VIDEO

2 Press the COMPUTER button.

The analog RGB signal connected to the input terminal of this unit will be detected and projected automatically.

(Component video will be detected if the COMPUTER input terminal is set to “YPBPR” (page 31).) If a video signal is not detected, the message NO SIGNAL will be displayed.

COMPUTER

All video signals input to this device will be detected if “AUTO SOURCE” is set to “ON” (page 33).

3 Press the INPUT SELECT button.

The video signal (RGB or YPBPR, VIDEO, S-VIDEO) connected to the input terminal of this unit will automatically be detected and projected. If a video signal is not detected, the message NO SIGNAL will be displayed.

INPUT SELECT

The signals are detected repeatedly in the sequence shown below.

RGB/YPBPR

S-VIDEO VIDEO

When “AUTO SOURCE” is set to “ON” (see page 33), all signals input to this unit will be detected.

20

Image 22
Contents PG-M10X PG-M10S Special Note for Users in the U.K English For Netherlands Only Power Sources CleaningAccessories Power-Cord ProtectionLamp Replacement InstallationPower Supply Fire and Shock PrecautionsContents Usage Guidelines For Sharp Assistance U.S.A. onlyRemote control that can operate the PC FeaturesMain Features You’ll Enjoy Compatible with following various color systemsWhen using the remote control as computer mouse Supplied AccessoriesFor remote control For video equipment connectionPress firmly and slide the battery cover off Preparing the Remote ControlRemote control effective range Slide the battery cover back until it snaps into placeBottom Part NamesTop, front side panel view Control panel Speaker 15Part Names Rear and side panel viewTerminal Panel Mouse terminal Video input terminal22 , 24 Flip Cover Remote control signal transmitter Remote ControlEnter button Tip InstallationPositioning the unit Projecting distance and image sizeProjection using a mirror Reversed Image SetupRear projection Connection to the Video input terminal of the unit Connecting video equipmentConnections Connection to the S-VIDEO input terminal of the unitConnection to the Computer input terminal Connecting a PC or MacintoshRear panel terminals of this unit Windows 98/Windows Changing the computer’s video resolutionsReceiving Video Output from Personal Computers WindowsAdjust the position and height of the unit Using the unitConnect the power cord When the projected image is offset verticallyCase of RGB input, adjust the video of the connected PC Adjuster AdjustmentUsing the unit Using the Remote Control Input Selection Using the Remote Control Input SelectionAfter using the unit Operating from the main unitRemote control mouse functions Using the Remote Control as the PC MouseConnecting a PC and the Mouse terminal of this unit Various functions while using the unit To move to the desired portion of the enlarged picture Enlarging the pictureScreen Reduction Menu button Menu operationMenu Structure Common menuMenu operation RGB inputFor VIDEO, S-VIDEO and component video Ypbpr input Adjusting the picture elementsTo close the menu Resolution Sync. kHz Sync. Hz IBM PC/AT compatible machine Adjusting the projected image from the computerTiming Chart Apple MacintoshAdjusting the position of the image Manual Adjustment of Personal Computer ImagesAdjusting Clock Frequency and Phase If no images appear during settingResetting the factory defaults ResettingResetting the Lamp Usage Timer Adjusting Color Balance Advanced Menu SettingsSetting the Video Type Selecting the Color SystemSetting the Display Frame Setting in Accordance With Image ContentSetting the Computer input terminal Setting FilterInitial Settings Initial Settings Auto Source SettingsUsing the Power Saving Function Selecting a Projection FormatSetting the Menu Display Position Setting the Menu OptionSelecting the Menu Language Other Menu Settings Menu Viewing SettingsTroubleshooting Please check the following before requesting repairsStatus Light Messages When the Status Indicator Illuminates or FlashesCondition Status Removing and installing the lamp unit Replacing the Projection LampTransporting the Projector Using the Carrying BagHow to use the carrying bag Out To the carrying bagSpecifications Replacement partsDimensions Sub Pin AssignmentsTypes of Presentations Guide to Effective PresentationsCreative Presentations Fonts Guide to Effective PresentationsSet-Up Guide to Effective Presentations Good BadRehearsing & Delivery Presentation TipsGlossary Index Enlarge buttonSharp Corporation

PG-M10X specifications

The Sharp PG-M10X is a compact and versatile portable projector that caters to the needs of business professionals, educators, and casual users alike. With its lightweight design and robust feature set, the PG-M10X is well-suited for both small meetings and larger presentations, ensuring that users have a reliable solution for various display needs.

One of the standout features of the Sharp PG-M10X is its resolution. It typically offers a native SVGA (800 x 600) resolution, which is ideal for standard presentations and slide shows. This resolution allows for clear and vibrant images, making text and graphics easy to read and comprehend. While it may not match the ultra-high-definition projectors available today, the PG-M10X performs exceptionally well in environments where high clarity is needed without requiring a significant investment.

The projector boasts a brightness level of approximately 2,200 ANSI lumens. This level of brightness is particularly effective in slightly lit rooms, as it ensures that images remain visible and sharp even in challenging lighting conditions. The PG-M10X also features a contrast ratio of 400:1, enhancing the depth of images, thereby making visuals more engaging during presentations.

In terms of connectivity, the Sharp PG-M10X offers a range of ports, including HDMI, VGA, and composite inputs, allowing users to easily connect various devices such as laptops, DVD players, and gaming consoles. This flexibility makes the projector an ideal choice for mixed-media presentations or classroom settings.

Another significant advantage of the PG-M10X is its 2-in-1 projection capability, enabling both front and rear projection without any hassle. This feature is especially useful in versatile setups where the projection surface might require adjustments based on audience layout.

The projector’s lamp life extends up to 4,000 hours in standard mode, allowing for an extended usage period before requiring a replacement. This extended lifespan minimizes maintenance costs and maximizes convenience for users who require frequent access.

Additionally, the PG-M10X incorporates innovative cooling technology, which ensures quiet operation by reducing fan noise during presentations. This consideration significantly enhances the viewing experience, allowing audiences to focus on the content rather than distracting background noises.

In conclusion, the Sharp PG-M10X delivers a well-rounded set of features that cater to various projection needs. Its reliability, ease of use, and versatility make it a preferred option for anyone looking to enhance their visual presentations effectively. Whether in the boardroom or the classroom, the PG-M10X stands ready to be a dependable projection partner.