Sharp PG-M10X operation manual Various functions while using the unit

Page 24

Various functions while using the unit

The following operations can be performed by opening the FLIP COVER of the remote control.

FREEZE button
AUTOSYNC FREEZE	AV MUTE
AUTO SYNC button	AV MUTE button
ENLARGE KEYSTONE VOLUME
ENLARGE +/– button	VOLUME +/– button
	KEYSTONE +/– button

Basic Operation

Automatic Screen Adjustment

Press the AUTO SYNC button.

AUTO SYNC

The position and size of the input image will be adjusted automatically in accordance with the resolution.

•Operation is the same as with the AUTO SYNC button of the main unit.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments.

Freezing animated images

You can capture the desired frame of a moving picture.

Press the FREEZE button.

A still image of the current frame is displayed. To restore the present picture, press the button again.

FREEZE

Tip

The still picture can also be enlarged (see page 23).

Turning off the image and muting the sound temporarily

Press the AV MUTE button.

The image turns off and the sound is muted at the same time. To restore the picture and sound, press the button again.

AV MUTE

Adjusting the Volume

Adjusting the volume of the unit's speaker.

Press the VOLUME + button to increase the volume or – to decrease.

VOLUME

KEYSTONE Adjustment

When distortion of the projected image cannot be compensated with the adjusters, press the KEYSTONE +/– button to adjust accurately.

KEYSTONE

Using the KEYSTONE button to adjust the top and bottom of a projected image.

The top and bottom of the projected will be compensated, as shown in the diagram. If the menu is displayed, distortion of the menu itself will not be compensated.

When keystone adjustment is used, you may select to enlarge the image to compensate for the adjustment or leave the image size unaltered. (see page 32).

22

Image 24

Contents PG-M10X PG-M10S Special Note for Users in the U.K English For Netherlands Only Cleaning AccessoriesPower Sources Power-Cord ProtectionInstallation Power SupplyLamp Replacement Fire and Shock PrecautionsContents Usage Guidelines For Sharp Assistance U.S.A. onlyFeatures Main Features You’ll EnjoyRemote control that can operate the PC Compatible with following various color systemsSupplied Accessories For remote controlWhen using the remote control as computer mouse For video equipment connectionPreparing the Remote Control Remote control effective rangePress firmly and slide the battery cover off Slide the battery cover back until it snaps into placePart Names Top, front side panel view Control panelBottom Speaker 15Rear and side panel view Terminal PanelPart Names Mouse terminal Video input terminalRemote Control 22 , 24 Flip Cover Remote control signal transmitterEnter button Installation Positioning the unitTip Projecting distance and image sizeReversed Image Setup Projection using a mirrorRear projection Connecting video equipment ConnectionsConnection to the Video input terminal of the unit Connection to the S-VIDEO input terminal of the unitConnecting a PC or Macintosh Connection to the Computer input terminalRear panel terminals of this unit Changing the computer’s video resolutions Receiving Video Output from Personal ComputersWindows 98/Windows WindowsUsing the unit Connect the power cordAdjust the position and height of the unit When the projected image is offset vertically Adjuster Adjustment Case of RGB input, adjust the video of the connected PC Using the unit Using the Remote Control Input Selection After using the unitUsing the Remote Control Input Selection Operating from the main unitUsing the Remote Control as the PC Mouse Remote control mouse functionsConnecting a PC and the Mouse terminal of this unit Various functions while using the unit Enlarging the picture To move to the desired portion of the enlarged pictureScreen Reduction Menu operation Menu StructureMenu button Common menuMenu operation RGB inputAdjusting the picture elements For VIDEO, S-VIDEO and component video Ypbpr inputTo close the menu Adjusting the projected image from the computer Timing ChartResolution Sync. kHz Sync. Hz IBM PC/AT compatible machine Apple MacintoshManual Adjustment of Personal Computer Images Adjusting Clock Frequency and PhaseAdjusting the position of the image If no images appear during settingResetting Resetting the factory defaultsResetting the Lamp Usage Timer Advanced Menu Settings Setting the Video TypeAdjusting Color Balance Selecting the Color SystemSetting in Accordance With Image Content Setting the Computer input terminalSetting the Display Frame Setting FilterInitial Settings Auto Source Settings Using the Power Saving FunctionInitial Settings Selecting a Projection FormatSetting the Menu Option Selecting the Menu Language Other Menu SettingsSetting the Menu Display Position Menu Viewing SettingsTroubleshooting Please check the following before requesting repairsWhen the Status Indicator Illuminates or Flashes Status Light MessagesCondition Status Removing and installing the lamp unit Replacing the Projection LampUsing the Carrying Bag How to use the carrying bagTransporting the Projector Out To the carrying bagSpecifications Replacement partsDimensions Sub Pin AssignmentsGuide to Effective Presentations Types of PresentationsCreative Presentations Fonts Guide to Effective PresentationsSet-Up Guide to Effective Presentations Good BadRehearsing & Delivery Presentation TipsGlossary Index Enlarge buttonSharp Corporation