Sharp PG-M10X Auto Source Settings, Using the Power Saving Function, Initial Settings

Page 35

Initial Settings

Auto Source Settings

With this function, the unit is automatically detecting the input signal.

1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “SETUP”.

2 Use the cursor / keys to select “AUTO SOURCE”, then use the cursor ￿ / ￿ keys to set “ON” or “OFF”.

ON: All input signals are detected.

OFF: Remote control VIDEO button: Video and S-video are detected. Remote control COMPUTER button: RGB and YPBPR signals are detected. Main unit INPUT SELECT button:

All input signals are detected individually.

Using the Power Saving Function

When there is no signal input for a period of 5 min. or more, the power is automatically turned off and standby status is activated.

1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ buttons to select “SETUP”.

2 When “SETUP” menu is displayed, use the cursor / keys to select “AUTO POWER OFF”.

3 Use the cursor ￿ / ￿ keys to set Power

Saving to “ON” or “OFF”.

Selecting a Projection Format

If the projection format is not correctly set in accordance with the installation conditions, images may be projected reversed, vertically, or horizontally.

1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “SETUP”.

2 When “SETUP” menu is displayed, use the cursor / keys to select “PROJECTION”, then press the ENTER button.

3 Use the cursor / keys to select a projection format in accordance with the set conditions.

The setting items will change as shown below each time a key is pressed.

NORMAL ⇔ VERTICALLY+HORIZONTALLY

⇔

⇔

REVERSED VERTICALLY

⇔ REVERSED HORIZONTALLY

•The unit cannot be installed to the ceiling.

•Be sure to always leave a space of minimally 20 cm (7 7/8") between the unit and surrounding obstructions.

•Do not use an installation stand made of material that is not heat-resistant.

•During an earthquake or when a child climbs on top of or hangs from the stand, the unit may fall. Use a wall or a post as a measure to prevent the unit from falling.

Menu Operation

To close the menu

Press the R-CLICK/EXIT button.

33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents PG-M10X PG-M10S Special Note for Users in the U.K English For Netherlands Only Power-Cord Protection CleaningAccessories Power SourcesFire and Shock Precautions InstallationPower Supply Lamp ReplacementContents For Sharp Assistance U.S.A. only Usage GuidelinesCompatible with following various color systems FeaturesMain Features You’ll Enjoy Remote control that can operate the PCFor video equipment connection Supplied AccessoriesFor remote control When using the remote control as computer mouseSlide the battery cover back until it snaps into place Preparing the Remote ControlRemote control effective range Press firmly and slide the battery cover offSpeaker 15 Part NamesTop, front side panel view Control panel BottomMouse terminal Video input terminal Rear and side panel viewTerminal Panel Part NamesEnter button Remote Control22 , 24 Flip Cover Remote control signal transmitter Projecting distance and image size InstallationPositioning the unit TipRear projection Reversed Image SetupProjection using a mirror Connection to the S-VIDEO input terminal of the unit Connecting video equipmentConnections Connection to the Video input terminal of the unitRear panel terminals of this unit Connecting a PC or MacintoshConnection to the Computer input terminal Windows Changing the computer’s video resolutionsReceiving Video Output from Personal Computers Windows 98/WindowsWhen the projected image is offset vertically Using the unitConnect the power cord Adjust the position and height of the unitUsing the unit Adjuster AdjustmentCase of RGB input, adjust the video of the connected PC Operating from the main unit Using the Remote Control Input SelectionAfter using the unit Using the Remote Control Input SelectionConnecting a PC and the Mouse terminal of this unit Using the Remote Control as the PC MouseRemote control mouse functions Various functions while using the unit Screen Reduction Enlarging the pictureTo move to the desired portion of the enlarged picture Common menu Menu operationMenu Structure Menu buttonRGB input Menu operationTo close the menu Adjusting the picture elementsFor VIDEO, S-VIDEO and component video Ypbpr input Apple Macintosh Adjusting the projected image from the computerTiming Chart Resolution Sync. kHz Sync. Hz IBM PC/AT compatible machineIf no images appear during setting Manual Adjustment of Personal Computer ImagesAdjusting Clock Frequency and Phase Adjusting the position of the imageResetting the Lamp Usage Timer ResettingResetting the factory defaults Selecting the Color System Advanced Menu SettingsSetting the Video Type Adjusting Color BalanceSetting Filter Setting in Accordance With Image ContentSetting the Computer input terminal Setting the Display FrameInitial Settings Selecting a Projection Format Auto Source SettingsUsing the Power Saving Function Initial SettingsMenu Viewing Settings Setting the Menu OptionSelecting the Menu Language Other Menu Settings Setting the Menu Display PositionPlease check the following before requesting repairs TroubleshootingCondition Status When the Status Indicator Illuminates or FlashesStatus Light Messages Replacing the Projection Lamp Removing and installing the lamp unitOut To the carrying bag Using the Carrying BagHow to use the carrying bag Transporting the ProjectorReplacement parts SpecificationsSub Pin Assignments DimensionsCreative Presentations Guide to Effective PresentationsTypes of Presentations Guide to Effective Presentations FontsGuide to Effective Presentations Good Bad Set-UpPresentation Tips Rehearsing & DeliveryGlossary Enlarge button IndexSharp Corporation

PG-M10X specifications

The Sharp PG-M10X is a compact and versatile portable projector that caters to the needs of business professionals, educators, and casual users alike. With its lightweight design and robust feature set, the PG-M10X is well-suited for both small meetings and larger presentations, ensuring that users have a reliable solution for various display needs.

One of the standout features of the Sharp PG-M10X is its resolution. It typically offers a native SVGA (800 x 600) resolution, which is ideal for standard presentations and slide shows. This resolution allows for clear and vibrant images, making text and graphics easy to read and comprehend. While it may not match the ultra-high-definition projectors available today, the PG-M10X performs exceptionally well in environments where high clarity is needed without requiring a significant investment.

The projector boasts a brightness level of approximately 2,200 ANSI lumens. This level of brightness is particularly effective in slightly lit rooms, as it ensures that images remain visible and sharp even in challenging lighting conditions. The PG-M10X also features a contrast ratio of 400:1, enhancing the depth of images, thereby making visuals more engaging during presentations.

In terms of connectivity, the Sharp PG-M10X offers a range of ports, including HDMI, VGA, and composite inputs, allowing users to easily connect various devices such as laptops, DVD players, and gaming consoles. This flexibility makes the projector an ideal choice for mixed-media presentations or classroom settings.

Another significant advantage of the PG-M10X is its 2-in-1 projection capability, enabling both front and rear projection without any hassle. This feature is especially useful in versatile setups where the projection surface might require adjustments based on audience layout.

The projector’s lamp life extends up to 4,000 hours in standard mode, allowing for an extended usage period before requiring a replacement. This extended lifespan minimizes maintenance costs and maximizes convenience for users who require frequent access.

Additionally, the PG-M10X incorporates innovative cooling technology, which ensures quiet operation by reducing fan noise during presentations. This consideration significantly enhances the viewing experience, allowing audiences to focus on the content rather than distracting background noises.

In conclusion, the Sharp PG-M10X delivers a well-rounded set of features that cater to various projection needs. Its reliability, ease of use, and versatility make it a preferred option for anyone looking to enhance their visual presentations effectively. Whether in the boardroom or the classroom, the PG-M10X stands ready to be a dependable projection partner.
Top Page Image Contents