Technicolor - Thomson 585 manual Details of a security level, Creating a new security level

Page 76

Chapter 4

SpeedTouch™ Web Interface

Details of a security level

To view the details of the currently active security level:

1In the Toolbox menu, click Firewall.

2Click the Details link.

Following information is provided per rule that is part of the security level The name of the rule

The Action that is applied on the traffic when the rule is valid

The Source and Destination interface or IP address (range) to which the rule applies

The protocol or SpeedTouch™ Service for which the rule applies.

The number of Hits (number of times that the rule was applied to traffic).

Creating a new security level

Proceed as follows:

1In the Toolbox menu, click Firewall.

2In the upper right corner, click Configure.

3In the Pick a task list, click Create a new Security Level.

4In the Name box, type a name for the new security level.

5Choose an existing security level to clone from.

6Click Apply.

Editing a security level Proceed as follows:

1In the Toolbox menu, click Firewall.

2In the upper right corner, click Configure.

3Select a security level, and then click the Edit link.

The firewall settings of the selected security level appear.

4You can:

Select a row using the Edit link to modify the security rule.

Click Add to create a new security rule.

5Edit or define following parameters of the rule: The Name of the security rule

The Source Interface and IP Address (range)

Use Any as IP address in case all traffic for the interface should be parsed.

Or you can type a User-definedIP address (range).

The Destination Interface and IP Address (range)

Use Any as IP address in case all traffic for the interface should be parsed.

Or you can type a User-definedIP address (range).

The Service type of the traffic; this can be a protocol (dns, smtp, ...) or a specific SpeedTouch™ system service.

68	E-DOC-CTC-20051017-0147 v2.0

Image 76

Contents

SpeedTouch585v6 Page SpeedTouch Trademarks CopyrightDocument Information Contents SpeedTouch Web Interface Troubleshooting Contents Terminology Documentation and software updates About this User’s GuideAbout this User’s Guide Getting to know your SpeedTouch Indicator Description Name Colour State SpeedTouch LED BehaviourIndicator Description Name LED Status DSLAccessing your SpeedTouch Access Method Can be used toAccess via the Web Interface To access the SpeedTouch via the Web interfaceTo access the SpeedTouch via the Command Line Interface CLI Access via CLIFor more information, see Quote site command on Select All Programs Accessories Command Prompt To start a Telnet sessionAccess via FTP Open a Command Prompt windowCommon FTP commands Use CommandFtp quote site ip iplist To disable remote access To access the SpeedTouch remotely To enable remote accessRemote Assistance Chapter Local Network Setup Wired Ethernet Wireless EthernetWired Ethernet For more information, see Device settings onWireless Ethernet Introduction Wireless client requirementsWireless Basics Chapter Wireless default settings Connecting Wireless Clients for the First TimeWireless Security on First-time association example Click Connect AnywayWireless Security Name SsidSearch for wireless devices task Security disabled defaultWEP Wired-Equivalent Privacy WPA-PSK Wi-Fi Protected Access Pre-Shared KeyConnecting Additional Wireless Clients Security issues Registering wireless clientsClick Configure Registering clients via Web pagesRegistering clients via the association button Extending the Range of Your Wirelstess Network Wireless Distribution System WDSChapter Chapter Internet Connectivity Dial-In Clients SpeedTouchWeb Pages Internet GatewayIf your computer runs You can use See 3.1 SpeedTouch Web Pages on page 31 to proceedIntroduction Starting an Internet session SpeedTouch Web PagesMonitoring your Internet connection Terminating an Internet session Internet Gateway Device Control Agent Internet connection status Terminating an Internet session SpeedTouch Web Interface SpeedTouch Consult DocumentationNavigation Menu Language Bar Navigation Bar Notification Area TasksCollapsing MenuExpanding the menu Language Bar Navigation Bar Notification Area Tasks SpeedTouch home HomeSpeedTouch Broadband Connection Toolbox Home Network Information Configuration Event Logs SpeedTouchInformation SpeedTouch Easy Setup Restart Restarting yourSpeedTouch Click Yes, restart my SpeedTouch. The SpeedTouch restartsConfiguration Back up & Restore Accessing the Backup & RestoreSaving your current configuration Restoring a previously saved configurationReset to Factory Defaults Resetting the SpeedTouch factory defaultsIndicator Description Event LogsBroadband Connection DSL Connection Internet ServicesBroadband Connection menu Pick a task list, click Check connectivity to the Internet Connectivity CheckClick Check Connectivity DSL Connection Internet Services Accessing the Internet Service Settings Overview Internet Service SettingsBroadband Connection menu, click Internet Services Toolbox Enabling Remote Assistance Username PasswordTerminating remote assistance Game & Application Sharing Chapter Accessing the Defined Games & Applications Defined Games & ApplicationsAccessing the Game or Application Definition Overview Configure UnderGame or Application Definition Adding a Port Translation ruleNew Game or Application Creating a new game or applicationParental Control Current Address Based Filtering rules Deny access to a specific Web site Allow access to a specific Web site Redirect a Web site Proceed as follows Allow is selected under Action for Unknown SitesConfigure content based filtering settings Under Content Based Filtering you canRedirecting all Web sites Click Redirect in the Action listContent Level Accessing the Content LevelToolbox menu, click Web Site Filtering Click Configure Icon DescriptionDisabled FirewallBlockAll StandardCreating a new security level Details of a security levelEditing a security level Proceed as follows Chapter Intrusion Detection On the Dynamic DNS page, click Configure Dynamic DNSUser Management User PrivilegesChapter Editing a user account Proceed as follows Edit UserToolbox menu, click User Management Changing the default user Change Default UserChange Default User page appears Add User Devices Home NetworkInterfaces Home Network Viewing wireless client information See 4.6.2 Device Settings on page 80 for more information DevicesAccessing the device settings Overview Device SettingsConnection Sharing Chapter Assign Public IP Assigning the public IP address to a deviceWireless Device Settings Accessing the wireless device settings OverviewAccessing the Access Access Point SettingsPoint settings Broadcast Network Name Allow New DevicesEncryption Select Use WEP EncryptionAccess control on SpeedTouch Select Use WPA-PSK EncryptionNew stations are allowed automatically New stations are allowed via registrationInformation, see 4.6.4 Wireless Device Settings on Configuring WDS Click Configure Pick a task list, click Configure WDSPick a task list, click Scan for wireless Access Points Establishing a WDS connectionInterfaces Interface Settings Assigning a new IP address to the SpeedTouchDhcp Pool Dhcp Pool Accessing the Dhcp PoolHome Network menu, click Interfaces Components Dhcp Pool Troubleshooting General SpeedTouch Troubleshooting SpeedTouch does not work SpeedTouch unreachablePoor SpeedTouch PerformanceWired Ethernet Troubleshooting LANLEDdoesnotlightup Make sure thatWireless Ethernet Troubleshooting Not able to connect wireless clientsUPnP on Windows XP Systems Adding IGD Discovery Control Resetting your SpeedTouch Software reset Hardware reset100 Page Need more help?