Technicolor - Thomson 585 manual Components Dhcp Pool

Page 100

Chapter 4

SpeedTouch™ Web Interface

Components of the

DHCP Pool page

The following settings are available for configuration:

Interface:

The SpeedTouch™ interface to which the DHCP pool applies.

Start Address:

The start IP address of the DHCP server’s address pool.

End Address:

The end IP address of the DHCP server’s address pool.

Both the start and end IP address define the IP address range used by the DHCP server to assign leases.

Subnet Mask:

The subnet mask of the DHCP server’s address pool.

Server:

The SpeedTouch™ IP address used as DHCP server address.

Gateway:

The IP address that will be assigned to the DHCP clients as their default gateway.

Primary DNS:

The IP address of the primary DNS server.

Secondary DNS:

The IP address of the secondary DNS server.

Primary WINS:

The IP address of the primary WINS server.

Secondary WINS:

The IP address of the secondary WINS server.

Lease Time:

The time for which the DHCP client is allowed to use the assigned IP address:

If you select Always give same address to DHCP clients, the lease time will be automatically set to Infinite.

Always give same address to DHCP clients:

Select this check box if you always want to use the same IP address for the DHCP clients.

92

E-DOC-CTC-20051017-0147 v2.0

 

Page 99 Page 101
Image 100
Page 99 Page 101
Contents SpeedTouch585v6 Page SpeedTouch Trademarks CopyrightDocument Information Contents SpeedTouch Web Interface Troubleshooting Contents Terminology Documentation and software updates About this User’s GuideAbout this User’s Guide Getting to know your SpeedTouch Indicator Description Name Colour State SpeedTouch LED BehaviourIndicator Description Name LED Status DSLAccessing your SpeedTouch Access Method Can be used toAccess via the Web Interface To access the SpeedTouch via the Web interfaceTo access the SpeedTouch via the Command Line Interface CLI Access via CLIFor more information, see Quote site command on Select All Programs Accessories Command Prompt To start a Telnet sessionAccess via FTP Open a Command Prompt windowCommon FTP commands Use CommandFtp quote site ip iplist To disable remote access To access the SpeedTouch remotely To enable remote accessRemote Assistance Chapter Local Network Setup Wired Ethernet Wireless EthernetWired Ethernet For more information, see Device settings onWireless Ethernet Introduction Wireless client requirementsWireless Basics Chapter Wireless default settings Connecting Wireless Clients for the First TimeWireless Security on First-time association example Click Connect AnywayWireless Security Name SsidSearch for wireless devices task Security disabled defaultWEP Wired-Equivalent Privacy WPA-PSK Wi-Fi Protected Access Pre-Shared KeyConnecting Additional Wireless Clients Security issues Registering wireless clientsClick Configure Registering clients via Web pagesRegistering clients via the association button Extending the Range of Your Wirelstess Network Wireless Distribution System WDSChapter Chapter Internet Connectivity Dial-In Clients SpeedTouchWeb Pages Internet GatewayIf your computer runs You can use See 3.1 SpeedTouch Web Pages on page 31 to proceedIntroduction Starting an Internet session SpeedTouch Web PagesMonitoring your Internet connection Terminating an Internet session Internet Gateway Device Control Agent Internet connection status Terminating an Internet session SpeedTouch Web Interface SpeedTouch Consult DocumentationNavigation Menu Language Bar Navigation Bar Notification Area TasksCollapsing MenuExpanding the menu Language Bar Navigation Bar Notification Area Tasks SpeedTouch home HomeSpeedTouch Broadband Connection Toolbox Home Network Information Configuration Event Logs SpeedTouchInformation SpeedTouch Easy Setup Restart Restarting yourSpeedTouch Click Yes, restart my SpeedTouch. The SpeedTouch restartsConfiguration Back up & Restore Accessing the Backup & RestoreSaving your current configuration Restoring a previously saved configurationReset to Factory Defaults Resetting the SpeedTouch factory defaultsIndicator Description Event LogsBroadband Connection DSL Connection Internet ServicesBroadband Connection menu Pick a task list, click Check connectivity to the Internet Connectivity CheckClick Check Connectivity DSL Connection Internet Services Accessing the Internet Service Settings Overview Internet Service SettingsBroadband Connection menu, click Internet Services Toolbox Enabling Remote Assistance Username PasswordTerminating remote assistance Game & Application Sharing Chapter Accessing the Defined Games & Applications Defined Games & ApplicationsAccessing the Game or Application Definition Overview Configure UnderGame or Application Definition Adding a Port Translation ruleNew Game or Application Creating a new game or applicationParental Control Current Address Based Filtering rulesDeny access to a specific Web site Allow access to a specific Web siteRedirect a Web site Proceed as follows Allow is selected under Action for Unknown SitesConfigure content based filtering settings Under Content Based Filtering you canRedirecting all Web sites Click Redirect in the Action listContent Level Accessing the Content LevelToolbox menu, click Web Site Filtering Click Configure Icon DescriptionDisabled FirewallBlockAll StandardCreating a new security level Details of a security levelEditing a security level Proceed as follows Chapter Intrusion Detection On the Dynamic DNS page, click Configure Dynamic DNSUser Management User PrivilegesChapter Editing a user account Proceed as follows Edit UserToolbox menu, click User Management Changing the default user Change Default UserChange Default User page appears Add User Devices Home NetworkInterfaces Home Network Viewing wireless client information See 4.6.2 Device Settings on page 80 for more information DevicesAccessing the device settings Overview Device SettingsConnection Sharing Chapter Assign Public IP Assigning the public IP address to a deviceWireless Device Settings Accessing the wireless device settings OverviewAccessing the Access Access Point SettingsPoint settings Broadcast Network Name Allow New DevicesEncryption Select Use WEP EncryptionAccess control on SpeedTouch Select Use WPA-PSK EncryptionNew stations are allowed automatically New stations are allowed via registrationInformation, see 4.6.4 Wireless Device Settings on Configuring WDS Click Configure Pick a task list, click Configure WDSPick a task list, click Scan for wireless Access Points Establishing a WDS connectionInterfaces Interface Settings Assigning a new IP address to the SpeedTouchDhcp Pool Dhcp Pool Accessing the Dhcp PoolHome Network menu, click Interfaces Components Dhcp Pool Troubleshooting General SpeedTouch Troubleshooting SpeedTouch does not work SpeedTouch unreachablePoor SpeedTouch PerformanceWired Ethernet Troubleshooting LANLEDdoesnotlightup Make sure thatWireless Ethernet Troubleshooting Not able to connect wireless clientsUPnP on Windows XP Systems Adding IGD Discovery Control Resetting your SpeedTouch Software reset Hardware reset100 Page Need more help?

585 specifications

The Technicolor - Thomson 585 is a renowned high-definition set-top box that has made a significant impact in the digital television landscape. Designed primarily for service providers and operators, the 585 model distinguishes itself through a combination of robust features, advanced technologies, and user-friendly characteristics that cater to the evolving needs of consumers.

One of the standout features of the Thomson 585 is its ability to support high-definition content, providing viewers with an immersive experience that enhances picture quality and clarity. The device supports various HD formats, enabling seamless playback of both live broadcasts and recorded media. This feature is particularly advantageous in an era where high-definition programming is increasingly becoming the standard.

In terms of connectivity, the Technicolor 585 is equipped with multiple HDMI outputs, allowing users to connect the box to various modern televisions and home entertainment systems effortlessly. This versatility extends to its support for various streaming services, making it a comprehensive solution for users looking to access a wide range of content from different sources.

Another defining characteristic of the Thomson 585 is its interactive features. The set-top box is designed with a user-friendly interface that promotes easy navigation through channels and content. This includes an electronic program guide (EPG) that helps users find and manage programming schedules effectively. Additionally, it supports advanced functionalities such as Video on Demand (VOD), enabling users to access a library of movies and shows at their convenience.

Moreover, the Thomson 585 incorporates cutting-edge compression technologies, such as MPEG-4, which optimizes the quality and efficiency of video transmission. This technology ensures that users can enjoy high-quality broadcasts without significant buffering or interruptions, even on standard broadband connections.

The functionality of the box is complemented by its integration with cloud services, facilitating features like remote recording and access to user preferences and profiles across devices. This aligns with the growing consumer demand for flexibility and personalized viewing experiences.

In conclusion, the Technicolor - Thomson 585 is a multifaceted set-top box that exemplifies the integration of technology and user need in the digital age. With its high-definition support, advanced connectivity options, interactive features, and cloud functionality, it remains a competitive choice for consumers and service providers alike. As digital content continues to grow, devices like the Thomson 585 will play a crucial role in shaping the future of home entertainment.
Top Page Image Contents