Technicolor - Thomson 510, 510i, 530 manual Step Action

Page 40

3 SpeedTouch™ System Software Upgrade

Step

Action

5The Setup wizard should find your SpeedTouch™ device on the local network. This is indicated by the following window:

In case more than one SpeedTouch™ device is found, a listing is provided from which you can select your SpeedTouch™ from.

Note: If the Setup wizard does not find any SpeedTouch™ on the network an error window pops up. In this case check:

•That the computer is not connected to the SpeedTouch™ via its USB interface

•Whether your computer is correctly connected to the SpeedTouch™ via its Ethernet port.

•That no dedicated firewall device or router is placed between your PC and the SpeedTouch™ and that no personal firewall software is running on your PC.

•Whether the SpeedTouch™ is turned on and fully initialized.

To repeat the search for the SpeedTouch™, click Back and proceed with step “4 ” of this procedure.

6Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™ device you can proceed with the upgrade procedure.

If more than one SpeedTouch™ device is listed, select the appropriate one. Then, click Next to proceed.

36	3EC 37891 AAAA TCZZA Ed. 01

Image 40

Contents SpeedTouch Page SpeedTouch 510/510i/530 Change Note PeckelbeenS Status ReleasedShort Title CD-UG ST510/530 R4.0 en Contents 3EC 37891 Aaaa Tczza Ed SpeedTouch Installation SpeedTouch Installation Getting Acquainted with the SpeedTouchPower/System LED LED logo DescriptionOff No Ethernet link Green Solid Off No USB link Green SolidIndicator Description Name Color Status Alert condition LEDFunctionality SpeedTouch510 backIndicator Description Name LEDSetting up the SpeedTouch 3EC 37891 Aaaa Tczza Ed Local Ethernet Connection Setup SpeedTouch Other equipment Type of LAN cableCrossover Straight-throughSpeedTouch530 USB Connection Setup SpeedTouch Configuration Setup on SpeedTouch Configuration Setup Configuration Setup for MS Windows Operating Systems Step Action Error window pops up. In this case check This procedureProceed with the configuration procedure described below This is indicated by the following windowConfiguration Procedure Step Action SpeedTouch Setup wizard will appear again to announce that Configuration has been successfulClient by default Instructions provided by your ISP or network administratorConfiguration Setup for other Operating Systems Procedure Step ActionDefaults. See Troubleshooting on See SpeedTouch Web Interface on page 23 forSpeedTouch Internet Connectivity See SpeedTouch Web Interface on page 23 for more informationSave this password Web pagesTions web Result the entry will be highlightedPPP session Step Action Access to the SpeedTouch web interface To access the SpeedTouch web pagesSpeedTouch Web Interface SpeedTouch Web InterfaceBasic topic menu Click Connect System InfoSystem Pass Word3EC 37891 Aaaa Tczza Ed Basic Topics Menu Links 3EC 37891 Aaaa Tczza Ed Advanced Topics Menu Links 3EC 37891 Aaaa Tczza Ed 3EC 37891 Aaaa Tczza Ed 3EC 37891 Aaaa Tczza Ed 3EC 37891 Aaaa Tczza Ed SpeedTouch System Software Upgrade SpeedTouch System Software UpgradeSpeedTouch Upgrade Wizard Step Action Step Action Appropriate file Your desicion before being able to proceedFollowing window allows you to overview your selection If you are satisfied, click Next to continueStep Action Manual System Software Management via Bootp Server SpeedTouch System Software Upgrade Troubleshooting TroubleshootingOff No USB link Green Solid Power On Self Test Post Problem Solution How to perform a Hardware reset to Factory defaults Step ActionTroubleshooting