2 SpeedTouch™ Web Interface
2 SpeedTouch™ Web Interface
Introduction The SpeedTouch™ comes with integrated local configuration capabilities.
The local configuration, via the SpeedTouch™ web interface, is based on the HTTP server/web browser concept.
It allows you to configure your SpeedTouch™ via a web browser using HTML pages from any local computer attached to the Ethernet interface(s) and/or from the PC connected via the USB interface (in case of a SpeedTouch™530).
Requirements Before you access the SpeedTouch™ pages, make sure that your browser is configured to directly connect to the SpeedTouch™, I.e. that it is not using a Proxy server.
If required, you can disable the proxy server for the time you want to access the Speed- Touch™ web pages.
For more information on how to disable your web browser's proxying, please consult the web browser's user's guide.
Use of the In most cases, the SpeedTouch™ is correctly configured for your Internet connectivity SpeedTouch™ web via the appropriate configuration profile/file and no further configuration on the web
interface interface is needed.
Access to the web pages is only required for some advanced configurations and upgrading/updating or backing up the SpeedTouch™ configuration.
Access to the SpeedTouch™ web interface
To access the SpeedTouch™ web pages:
Step | Action |
1Start the web browser on your PC or computer.
2Browse to the SpeedTouch™ at the SpeedTouch™'s IP address (in most cases 10.0.0.138).
3If a system password has been set, an authentication window will be displayed. Enter user name and system password in the appropriate fields.
3EC 37891 AAAA TCZZA Ed. 01 | 23 |
|