Adjusting the Projected Image (“SCR-ADJ” Menu)
The illustration shown here is for explanation and may be different from the actual
Picture |
Menu operation ⇒ Page 34
■V-Image Shift
Selectable items | \ button | button |
| Downward | Upward |
Resize
Overscan
Auto
Keystone Mode
Sphere
Rotation
OSD Display
OSD Brightness
Background
Menu Position
PRJ Mode
Language
Normal
0 0
On
Keystone
0 0 0 0
On
Standard
Logo
Upper Left
Front
English
\ button |
| button | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEL./ADJ. | ENTER |
RETURN | END |
1Setting the Resize Mode
Note
•For details of the Resize mode, see page 29.
•You can also press RESIZE on the remote control to set the resize mode. (See page 29.)
2Adjusting the Image Position
You can move the projected image horizontally or verti- cally.
■H-Image Shift
Selectable items |
| \ button | button | |
| Leftward | Rightward | ||
|
|
|
|
|
|
|
|
|
|
\ button | button | |
|
|
|
|
|
|
Note
•Depending on the Resize mode, Picture mode or the input signal resolution, the range of the image shift may be limited.
3Adjusting the Overscan
This function allows you to adjust the Overscan area (display area).
Selectable items | Description | |
On | The input area is displayed without screen | |
edges. | ||
| ||
Off | The whole input area is displayed. |
Note
•You can adjust the Overscan area for the fol- lowing input signals and the RESIZE function.
-Input signal: 480I/480P, 540P, 576I/576P, 720P, 1035I or 1080I/1080P
-RESIZE function:“NORMAL”, “STRETCH”, “CINEMA ZOOM” or “ZOOM 14:9”
•If the display area ratio is set too large, noise may appear at the screen edges. If this hap- pens, set the display area ratio to a smaller value.
•Also read “About Copyrights” on page 30.