Sharp XV-Z15000 Adjusting the Projector Function PRJ-ADJ Menu, 1Setting Auto Power Off Mode

Page 47

Adjusting the Projector Function (“PRJ-ADJ” Menu)

The illustration shown here is for explanation and may be different from the actual on-screen display.

Menu operation ⇒ Page 34

3Setting One Touch Play, System

Standby and Input Name

Picture SIG-ADJ

Auto Power Off

Economy Mode

One Touch Play

System Standby

Input Name

Demo Mode

RS-232C

Fan Mode

All Reset

SCR-ADJ PRJ-ADJ

On

Off

Off

Off

Off

9600bps

Normal

When a Sharp product equipped with Consumer Elec- tronics Control (HDMI CEC) is connected to the projector with an HDMI cable, you can use the linked function with HDMI CEC (“One Touch Play” and “System Standby”).

Note

The CEC function may not work with some CEC devices. (When the projector is connected to a non- Sharp product, the CEC function may not work.)

Lamp Timer (Life)

X

h

XX

min ( XX% )

 

 

 

 

 

SEL./ADJ.

 

 

ENTER

RETURN

 

 

END

1Setting Auto Power Off Mode

This function automatically switches the projector to Standby mode if no signals are received for a set period.

Selectable items

Description

On

When no input signal is detected for

 

more than 15 minutes, the projector

 

will automatically enter standby mode.

Off

The Auto Power Off function will be

 

disabled.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

2Setting the Power Save Mode (Economy Mode)

■Economy Mode

Selectable items

Description

On

This enables the Economy mode.

Off

You can use the linked functions. RS-

 

232C can be used to control the pro-

 

jector in standby mode.

Note

•Set this function to “Off” when you want to use RS-232C to control the projector from a computer.

•One Touch Play is set to “Off” when the Economy mode is set to “On”.

■Setting the One-Touch Playback Function

(One Touch Play)

One Touch Play turns on the projector and selects the input automatically when you turn on or begin playback on connected HDMI-compliant Sharp Video Products.

Selectable items

Description

On

This enables One Touch Play.

Off

This disables One Touch Play.

Note

•When enabling One Touch Play, be sure to enable the CEC setting on the HDMI-compliant Sharp Video Products connected to the projector.

•The Economy mode is set to “Off” when One Touch Play is set to “On”.

•In the following cases, One Touch Play is not enabled.

-When playback is paused

-When the screen is turned off (black) after the lens shutter is closed

-When the cooling fan is running (See page 48.)

-When the lamp is warming up (See page 48.)

■Setting the System Standby Function (System Standby)

When you turn off the projector, the HDMI-compliant video equipment connected to the projector enters standby mode.

Selectable items

Description

On

This enables System Standby.

Off

This disables System Standby.

Note

•When enabling System Standby, be sure to enable the CEC setting on the HDMI-compliant Sharp Video Products connected to the projector.

Useful Features

-45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents XV-Z15000 Special Note for Users in the U.K See bottom of projector IntroductionDeclaration of conformity InformationContents Buttons used in this operation Info Indicates safeguards for using the projectorDamage Requiring Service CleaningAccessories Power-Cord ProtectionDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Optional accessories AccessoriesSupplied accessories Projector Part Names and FunctionsTerminals Projector Rear ViewHDMI1, 2, Component VIDEO, Video Remote ControlInserting the Batteries Using the Remote ControlWhen using the remote control 23 7 m Remote control sensorsPlace the projector facing a screen Quick StartTurn the video equipment on and start playback Select the input modeAdjust the projector angle, focus and zoom Turn the power offExample of standard setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front Projection174 Projection PRJ ModeCeiling-mount Setup Picture SizeScreen Size and Projection Distance Samples of Cables for Connection You may need other cables or connectors not listed belowConnecting to Equipment with S-video Output Terminal Connecting to Video EquipmentConnecting to a Computer Using the RGB Cable Connecting to a ComputerControlling the Projector by a Computer For details on RS-232C specifications and commands, seeTurning the Projector On/Off Connecting the Power CordAbout the Lamp Indicator Direct Power Off functionAdjusting the Height Adjusting the Projected ImageAdjusting the Focus Adjusting the Picture SizePress Keystone Press Keystone to enter the keystone modePress P/R/O/Q to adjust Keystone Correction Keystone CorrectionPress P/R to select SPHERE, and then press Enter Press P/R/O/Q to adjust Sphere Correction modePress P/R/O/Q to adjust the Rotation Correction mode Auto V-Keystone CorrectionImage Shift Switching the Input ModeAdjusting the Vertical Horizontal Position Image Press Image Shift to enter the image shift modeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying the Black Screen TemporarilyDisplaying an Enlarged Portion of an Image Switching the Iris SettingSwitching the Eco+Quiet Mode Press Magnify on the remote controlResize button Resize ModePress Resize on the projector or on the remote control Resize ModeAbout Copyrights Picture menu Menu Bar ItemsSIG-ADJ menu SCR-ADJ menu Menu Selections Adjust- ments Using the Menu ScreenPress Enter To adjust the projected image while viewing itPress or to select the item you want to adjust Press or \ to adjust the item selected2Adjusting the Image Picture Adjustment Picture Menu1Selecting the Picture Mode 4Eco+Quiet 3Switching the Iris Setting5Using the Advanced 7Adjusting the ColorsS. color adjustment screen EResetting All Adjustment Items 8Adjusting the Bright Boost9Selecting the Film Mode 0Setting Detail Enhancement2Setting the Resolution Computer Image Adjustment SIG-ADJ Menu3Auto Sync Auto Sync Adjustment 1Adjusting the Computer Image6Setting the Video Setup 5Setting the Video System7Adjusting the Dynamic Range 8Signal Info 3Adjusting the Overscan Adjusting the Projected Image SCR-ADJ Menu 1Setting the Resize Mode 2Adjusting the Image PositionOr Q 5Keystone Mode Correction4Auto V-Keystone Correction 9Selecting the Menu Screen Position 6Setting On-screen Display7Setting the Brightness Menu Screen 8Selecting the Background Image2Setting the Power Save Mode Economy Mode Adjusting the Projector Function PRJ-ADJ Menu3Setting One Touch Play, System Standby and Input Name 1Setting Auto Power Off Mode8Lamp Timer Life 4Setting the Demo Mode6Fan Mode Setting 7Returning to the Default SettingsCleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensIndicators on the Projector Maintenance IndicatorsAbout the temperature warning indicator About the lamp indicatorNot illuminate Down Outlet, and then connect it again Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Component Input/Output Connecting Pin AssignmentsHdmi Terminal Computer Input/OutputComputer control RS-232C Specifications and CommandsERR ERR OK, ERR Computer Computer Compatibility ChartProblem Check TroubleshootingReplace the lamp For Sharp Assistance Hdmi SpecificationsUnits inches mm DimensionsIndex Sharp Corporation
Related manuals
Manual 66 pages 7.72 Kb
Top Page Image Contents