Noise emission, Storage of supplies | Sharp MX-M364N, MX-M564N

�Caution

Use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)

SUPPLIES

Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher.

Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film.

For best copying results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp products. Look for the Genuine Supplies label on the toner package.

GENUINE SUPPLIES

Storage of supplies

�Proper storage

1.Store the supplies in a location that is:

•clean and dry,

•at a stable temperature,

•not exposed to direct sunlight.

2.Store paper in the wrapper and lying flat.

3.Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misfeeds.

�Storing toner cartridges

Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge standing on end. If stored standing on end, the toner may not distribute well even after shaking the cartridge vigorously, and will remain inside the cartridge without flowing out.

•Store the toner in a location that is cooler than 40°C (104°F). Storage in a hot location may cause the toner in the cartridge to solidify.

•Please use SHARP-recommended toner cartridges. If toner cartridges other than SHARP-recommended toner cartridges are used, the machine may not attain full quality and performance and there is a risk of damage to the machine.

�Staple cartridge

The finisher and saddle finisher require the following staple cartridge:

MX-SCX1 (for finisher and saddle finisher)

Approx. 5000 per cartridge x 3 cartridges

AR-SC2 (for finisher (large stacker) and saddle stitch finisher (large stacker)) Approx. 5000 per cartridge x 3 cartridges

AR-SC3 (for saddle stitch of saddle stitch finisher and saddle stitch finisher (large stacker)) Approx. 2000 per cartridge x 3 cartridges

Supply of spare parts and consumables

The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too, are available for 7 years following the termination of production.

SAFETY DATA SHEET

The SDS (Safety Data Sheet) can be viewed at the following URL address:

http://www.sharp-world.com/corporate/eco/env-info/sds/index.html

Noise emission

Noise emission values

The following shows noise emission values as measured according to ISO7779.

Sound power level LWAd

	MX-M364N	MX-M464N	MX-M564N
Operating (continuous printing)	7.4 B	7.5 B	7.6 B
Standby mode (Low power level mode)	-	-	-

Sound pressure level LpAm

		MX-M364N	MX-M464N	MX-M564N
Operating	Bystander positions	57 dB	58 dB	59 dB
(continuous printing)	Bystander positions	57 dB	58 dB	59 dB
(continuous printing)
Standby mode	Bystander positions	-	-	-

•Operating: With options MX-DE14, MX-RB22, MX-FN11.

•Standby: “-”=less than background noise.