Operating Your Receiver

ON/STANDBY

MUTE

PHONES

H O M E T H E A T E R A U D I O V I D E O R E C E I V E R

SOURCE						SURR MODE
FM/AM	TUNING	MEMORY	SETUP	TEST TONE	EQ	DIGITAL INPUT
			OK
SOURCE						DSP MODE
						ST / MONO

VOLUME

BASS/TREBLE

LEVEL

V-AUXVIDEO L - AUDIO - R

Receiver Controls

1. STANDBY/ON

To turn the unit on/ off. When the system is turned on, the unit will go to the mode it was in before powered off.

2. MUTE

To mute speakers and headphone out.

3. PHONES

Plug your headphones (not supplied) into it for your private enjoyment. Speakers will be off when phones are inserted.

4. Source Buttons

To select sound source. For example, CD, SAT, Tuner etc.

5. Display

To display current status of the receiver.

6. Sound Control

Let you adjust the sound – volume, treble, bass & level.

•To change the VOLUME, turn the large knob.

•To adjust TREBLE or BASS, press relevant button and turn the knob.

•Bass/Treble can only be activated under stereo mode. Bass/Treble effects are only active when there is no custom

EQ effect. When pressing BASS/TREBLE, the unit will auto- matically go to EQ OFF mode.

•To change the volume of individual speaker, press LEVEL but- ton repeatedly to select the speaker, then turn the knob to adjust the level.

7.DSP (Digital Sound Processor) Press this button to select the DSP mode

(STADIUM/THEATER/CONCERT/CLUB/CHURCH/ARENA/DSP OFF) you want.

8.SETUP FUNCTION

•To adjust the speaker size, speaker distance, speaker phase, night mode, sleep and display dimmer.

•In SLEEP mode, you can set the receiver to turn off from 5 to 120 minutes.

9. TUNING

Press for about 2 seconds to search for next station. Press once to review all preset stations in preset mode.

In normal mode, press to increase/decrease tuner frequencies.

10. SURR. MODE

Press repeatedly to select the surround mode you want. ( refer to “Advanced Sound Control” on page 20)

11. MEMORY

Press to toggle between manual tuning mode and preset sta- tion mode, Press and hold to manually store tuner station in preset mode.

12. FM/AM

Press to choose between FM/AM in TUNER mode.

Press and hold to automatically search and save preset stations (FM only).

FM/AM button can only switch tuner bands and can not select Tuner source.

13. TEST tone

When pressing it briefly, a short noise (test tone) will be gener- ated in the speakers one by one so that you can adjust the vol- ume of individual speaker. (See page 9 for details)

14. EQ

Press repeatedly to select the desirable EQ mode (music style) – FLAT, ROCK, POP, JAZZ, CLASSIC, VOCAL. Your choice will be saved automatically.(Only available in Stereo mode)

15. DIGITAL INPUT/ ST / MONO

Press repeatedly to select the input device (analog / optical / optical 2 (RT2600 only) / coaxial). In FM mode, press to toggle between stereo and mono.

16. V-AUX Input

For convenient use of your digital camera, family game machines, second VCR, etc.