Technicolor - Thomson RT2350BK, RT2600 manual Retrieving preset stations

Operating your Receiver

Retrieving preset stations

1. Press FM/AM to select tuner mode

SOURCE
FM/AM	TUNING	MEM
SOURCE

6 Channel external input (RT2600 only)

An external decoder (Dts, Dolby Digital, etc…) or a device with built-in multi-channel decoder and 6 channel output connector (DVD player, TV…) can be connected to the 6CH input. It is therefore possible to play any future 6 Channels coding (SACD, DVD Audio) thanks to this connection. The external decoder device will send the separated audio infor- mation to the receiver that will then amplify the sig- nal and send to appropriate speakers.

2.Press MEMORY/MENU button to enter preset set- ting mode (MEMORY icon shows on display), Press TUNING UP/DOWN to select preset station.

AM TUNING MEMORY

OK

OPTICAL 1
	FR	FL
OPTICAL 2
	SR	SL
RT2600 ONLY
	SUB	CEN
SUBWOOFER	6 CH. EXTERNAL INPUT
PREOUT
		RT2600 ONLY

To activate 6 Channel external input, press the source key on the receiver until 6 CH is selected or press DVD/6 CH twice on the remote control.

SOURCE
FM/AM	T
SOURCE

NOTE

During 6-Channel direct input mode, TAPE OUT and REC OUT of VCR mode will not be available.

NOTE

To enable all 6 CHANNELS in 6CH external Input mode,make sure that when the receiver is in DVD source, Dolby Prologic or Dolby digital/DTS is always selected first before switching to DVD/6 CH mode (otherwise only 2 channels/speakers will be enable in 6 CH mode).

18