Advanced Sound Control
Stereo
The Stereo mode uses the two main channel outputs from the front speakers. Use this mode if you have connected the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real environment such as (STADIUM / THEATER / CONCERT / CLUB / CHURCH / ARENA). DSP automatically converts analog audio signals to digital ones which enables you to adjust the sound without degrading the sound quality. Different modes will give you different feel of size and type of listening environment. (Not available in Dolby Digital/DTS)
Night Mode
By using Dynamic Range Compression technology (pressing OK), you can enjoy enhanced Dolby Digital sound quality at night without interrupting your roommates or neighbors.
Night Mode will compress the difference in volume between normal voices and sound like explosions, while still enjoying a Dolby Digital enable component (DVD, SAT). Night Mode can be activated by pressing the OK
button repeatedly until NORMAL appears on the display. While Normal is still on the display, press the LEFT or RIGHT Adjustment buttons on the remote control,around the OK button, on the remote control until you select the desired mode. There are three modes (NORMAL, SOFT, SOFTER) for you to choose the extents of compression.
Fine Setting of the Components
The receiver has
If you decide to change the surround mode, you can press the SURR MODE repeatedly to toggle among the different surround mode choices and select the one you want.
DOLBY PL2 MOVIE (RT2600 only)/ |
|
|
|
|
| ||
DOLBY PL2 MUSIC (RT2600 only)/ |
|
|
|
|
| ||
DTS (RT2600 only)/ |
|
|
|
| Stereo | ||
|
|
|
| ||||
DOLBY PROLOGIC/ |
|
|
|
|
| ||
DOLBY DIGITAL |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Source/ | If Digital Input (optical | If Analog Input | |||||
Input | or coaxial) is selected | is selected | |||||
DVD | Dolby Digital/DTS(RT2600 only) | PRO LOGIC | |||||
SAT | Dolby Digital/DTS(RT2600 only) | PRO LOGIC | |||||
VCR | N/A |
|
|
| PRO LOGIC | ||
N/A |
|
|
| PRO LOGIC | |||
TV | Dolby Digital/DTS(RT2600 only) STEREO | ||||||
CD | STEREO |
|
|
| STEREO | ||
TAPE | N/A |
|
|
| STEREO | ||
TUNER | N/A |
|
|
| STEREO | ||
|
|
|
|
|
|
|
|
The receiver will keep the last selection in memory.
NOTE
If linear PCM source (CD), format wil be Dolby Prologic even with Digital Input.
Input Signal Setting
The receiver defaults to the most convenient settings for your easiest use (see table).
If your connection is different from the default set- ting,
1.Select the source
2.Press DIGITAL INPUT button to toggle among opti- cal/ coaxial/ analog to match your connection. Your selection will be stored automatically.
The selected source and input source will be displayed on the display as long as they are active, except for some temporary change of display (e.g. adjusting vol- ume).
Digital Input
Select this setting to play digital signals from a DVD, CD, LD player, SAT or TV.
SOURCE | DEFAULT INPUT (as seen on display) |
SAT | Analog (SAT/ ANL) |
DVD | Analog (DVD/ ANL) |
CD | Analog (CD/ ANL) |
VCR | Analog (VCR/ ANL) |
Analog | |
FM/AM | |
TAPE | Analog (TAPE/ ANL) |
TV | Analog (TV / ANL) |
|
|
NOTE
Digital input is only available for DVD, SAT, CD and TV
Analog Input
Select this setting to play analog signals from a cas- sette deck, VCR or turntable.
SOURCE | AVAILABLE INPUT |
SAT | Analog / Optical / Optical2 (RT2600 only) / Coaxial |
DVD | Analog / Optical / Optical2 (RT2600 only) / Coaxial |
CD | Analog / Optical / Optical2 (RT2600 only) / Coaxial |
VCR | Analog / |
Analog / | |
TAPE | Analog / |
TV | Analog / Optical / Optical2 (RT2600 only) / - |
|
|
20