Technicolor - Thomson RT2350 Operating the Radio, Manual tuning, Selecting Mono or Stereo Sound

Page 19

Operating your Receiver

Operating the Radio

The receiver has a built-in tuner that allows for AM/FM radio function.

Manual tuning

1.Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details)

2.Press ON/STANDBY to switch on the receiver.

5- Tune the stations by pressing TUNING UP or DOWN repeatedly until the desired station is found. Alternatively, you can press and hold TUNING UP or DOWN for about one second to activate the automatic SEARCH function. In this mode the receiver will automatically tune frequencies until it finds a station

RCE

FM/AM TUNING MEMORY

RCE

ON/STANDBY

NOTE

 

MUTE

 

 

1. If there is interference, modify the location

3. Press SOURCE keys to enter TUNER mode.

of the antenna until the optimal sound is heard.

 

TV and other electronic devices could be the

 

cause of interferences so try to position the

 

antenna away from them.

SOURCE

 

2. Weak signal can affect the "auto Search

FM/AM

TUNIN

SOURCE

 

function". Adjust the antenna for better recep-

 

 

tion for more efficient search.

 

 

Select sound effect if needed by pressing Preset EQ or

 

 

DSP sound (see "Advance sound section" for details).

4- To select band, press the FM/AM button to toggle between AM/FM mode.

Selecting Mono or Stereo Sound

SOURCE

 

 

FM/AM

TUNING

MEM

SOURCE

 

 

Press ST/MONO on the main unit or the DIGITAL button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available).

SURR MODE

SETUP TEST TONE EQ DIGITAL INPUT

DSP MODE

ST / MONO

BA

V

16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Importador RT2350/RT2350BK/RT2600 FCC Information Remote Codes Table of ContentLimited Warranty Operating your Receiver FCC Information Getting StartedUnpacking the Receiver Getting StartedUnpacking The Speakers Set up and Maintenance of the ReceiverProtect your Components from Overheating Digital Connection Video Connecting to Audio-Visual ComponentsDigital Connections Connecting the AntennasAM Loop Antenna and FM Indoor Antenna Speakers Connecting the SpeakersConnecting the Subwoofer Speaker wiresFront Speaker Placement Advanced SettingPositioning your speaker Advanced Setting Alternative Surround Placement Preferred surround placementTest Tone / Channel balance Connecting for PowerUsing Headphones Factory SettingReceiver Controls Operating Your ReceiverYour Remote Control KHz MHz DisplaySelection of Audio/Video source Switching on/offExample FM/AM Using the Remote to Control Additional ComponentsPlaying a DVD with the receiver Using the receiver to play a sourceOperating the Radio Manual tuningSelecting Mono or Stereo Sound UP/DOWN, while Storing radio stationsRetrieving preset stations Digital Theater Systems DTS RT2600 only Sound Enhancement SystemsDolby Pro Logic II RT2600 only Dolby DigitalAdvanced Sound Control Fine Setting of the ComponentsTest Tone button Fine Setting of the SpeakersFactory defaulted Advance setting indication from VFD Speaker ConfigurationsSpeaker Icons Advance Sound ControlDisplaying Program Formats Equipment Specifications Troubleshooting TipsCable Codes Remote CodesRemote Codes Audio RCA/Dimensia only Satellite ReceiversLaser disc Players Limitation of Warranty What your warranty coversHow you get service What your warranty does not coverIf you purchased your unit outside Canada Limited Warranty Canada
Top Page Image Contents