Sharp PN-E802, PNE802 Preparing the Remote Control Unit, Installing the batteries, 16.4, Feet

Page 14

Preparing the Remote Control Unit

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

TIPS

•When the batteries become exhausted, replace them with new (commercially available) batteries.

•The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on how they are stored.

•If you will not be using the remote control for a long time, remove the batteries.

•Use manganese or alkaline batteries only.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

 

Remote

 

control sensor

10°

 

16.4

 

 

feet

10°

10°

(5 m)

 

10°

 

 

TIPS

•Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

•Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

•The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

•Objects between the remote control unit and the remote control sensor may prevent proper operation.

•Replace the batteries when they run low as this may shorten the remote control’s operation range.

•If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

•Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

E14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PN-E802 Model No Serial No A. onlyRefer Servicing to Qualified Service Personnel Important InformationDear Sharp Customer Safety Precautions Tips and Safety Instructions Do not place the monitor on a device which generates heat For the monitor in landscape orientationFor the monitor in portrait orientation Contents Supplied ComponentsPart Names NFront viewPower button See Mute button See Part Names NRemote control unitSignal transmitter Connection with a PC or AV equipment Connecting Peripheral Equipment11 E Connecting Peripheral Equipment Removing the Handles Connecting the Power CordBinding Cables 13 ERemote control operation range Preparing the Remote Control UnitInstalling the batteries 16.4Turning power on/off Turning Power On/OffTurning on the main power 15 EDisabling power on/off operations Turning Power On/Off NDate/time settingMute Basic Operation17 E MenuDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offDisplaying the menu screen Menu Items19 E NSCREEN Menu item detailsMenu Items NPICTURENAUDIO Menu Items NSETUP21 E NOPTION 23 E Menu Items NMULTIMenu Items NPIP/PbyP NDual screen display25 E Menu Items NZOOM2 Special SettingSetting procedure NEnlargeDAY of the Week PowerMenu Items NSCHEDULE InputNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 27 EAdjustment Lock Target ALL ResetAdjustment Lock Temperature Alert29 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionNCommunication interval NID numbers31 E Wait ←Setting of the Gamma user data How to read the command table RS-232C command tablePower control/Input mode selection 33 EControlling the Monitor with a PC RS-232C Screen menu 35 E Controlling the Monitor with a PC RS-232C Picture menuSetup menu Controlling the Monitor with a PC RS-232C Audio menu37 E Controlling the Monitor with a PC RS-232C Option menuLandscape orientation Portrait orientation Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu39 E Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C Others41 E Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PCControlling the Monitor with a PC LAN 43 EControlling with a PC Basic operationStandby mode, Power on is the operation available Information about this monitor appearsDNS Server User Name / Password45 E Accept IP AddressAccount Name / Password Installation Information NAME/LOCATIONAuthentication Monitor NameCondition 47 ERecipient E-MAIL Addresses ConfirmationTrap Setting of Authentication Error Snmp SettingTrap Setting VersionTroubleshooting 49 ETroubleshooting 51 E SpecificationsNProduct Specifications Dmpm Digital Monitor Power Management Specifications NDimensional DrawingsNPower management NDDC plug and play53 E Specifications NCompatible signal timing PCNCompatible signal timing AV NPC/AV DVI-D output terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV Hdmi input terminal pinsSecure using 2 cover screws M4 with washers supplied 55 EPN-E802 Mu EN12D1

PNE802, PN-E802 specifications

The Sharp PN-E802 and its variant, PNE802, represent the pinnacle of professional display technology, designed to meet the demanding needs of various commercial environments. With a massive 80-inch diagonal screen, these displays offer an immersive visual experience, making them ideal for use in meeting rooms, conference halls, retail spaces, and control rooms.

One of the key features of the Sharp PN-E802 is its 4K Ultra HD resolution, providing stunning clarity and detail. With a resolution of 3840 x 2160 pixels, images and text appear razor-sharp, allowing viewers to see every detail, which is essential for presentations and video content. The widescreen aspect ratio enhances the cinematic experience, ideal for videos and detailed graphics.

Equipped with advanced LCD technology, the PN-E802 showcases vibrant colors and deep blacks, further enhanced by Sharp's proprietary UV2A technology. This technology improves color accuracy and enhances brightness, ensuring that images remain vivid even in well-lit environments. The display supports a wide color gamut, encompassing a broader range of colors to produce more accurate and lifelike images.

Moreover, the PN-E802 boasts an integrated digital signage function, making it suitable for dynamic content displays. Users can easily manage and update content via a USB connection, allowing for seamless integration into existing systems. This feature is particularly useful for businesses that need to display rotating advertisements or informational content.

Another noteworthy characteristic of the Sharp PN-E802 is its robust build and reliability. Designed for 24/7 operation, this display can withstand constant use without compromising performance. It also features a sleek design, making it an aesthetic addition to any corporate or public space.

Finally, connectivity options abound with the PN-E802, including multiple HDMI, DisplayPort, and DVI inputs, allowing for a versatile array of connection types. This ensures compatibility with various devices, from computers to media players, making installation and integration into existing AV systems straightforward.

In summary, the Sharp PN-E802 and PNE802 models are high-performance displays that combine advanced technology, exceptional image quality, and versatile functionality, making them an excellent choice for any professional setting. Whether for presentations, signage, or collaborative work, these displays deliver an unparalleled viewing experience that stands out in any environment.
Top Page Image Contents