Sharp PNE802, PN-E802 operation manual 31 E, Wait ←

Page 31

Controlling the Monitor with a PC (RS-232C)

nCommands for ID control

The command examples shown on this page assume the following connection and ID number set up.

ID number: 1 ID number: 2 ID number: 3 ID number: 4

IDST .........A monitor receiving this command sets its own ID

number in the parameter field.

Example:

IDST0001

OK 001 ← The ID number of this monitor is set to 1.

IDLK ........The parameter of this command sets the ID

number of the monitor. The monitor is subject to all subsequent commands.

Example:

IDLK0002

Following commands are for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.*

WAIT

 

Processing

OK

002

 

 

TIPS

You can automatically assign ID numbers by using the IDST command with the Repeater control (see “Repeater control” on page 32).

For example, using the command “IDST001+” automatically sets the ID numbers, as shown below.

[Example]

ID number: 1 ID number: 2 ID number: 3 ID number: 4

VOLM0020 ←

WAIT

OK 002 IDLK0000 ←

WAIT ←

OK 002 ← VOLM0010

OK 001 ←

Sets volume of monitor with ID number: 2 to 20.*

Canceling fixed ID number setting

Canceling IDLK

Cancelation complete

The volume of the monitor with ID number: 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.)

IDST001 +

ID setting command with repeater control

WAIT

 

 

OK

001

“OK” response from ID number: 1

OK

002

“OK” response from ID number: 2

OK

003

“OK” response from ID number: 3

OK

004

“OK” response from ID number: 4 (End)

IDSL ........The parameter of this command sets the ID number

of the monitor. The monitor is subject to the next command.

Example:

IDSL0002

The next command is for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.

WAIT

 

Processing

OK

002

OK response from monitor with ID

 

 

 

number: 2

VOLM0020

Sets volume to 20.

OK

001

 

The volume of the monitor with ID

number: 1 (the one directly connected

to the PC) is set to 20.*

*The IDSL command is effective only once, for the immediately succeeding command.

*The IDLK command remains effective until it is canceled, or power is shut off.

IDCK........Provides screen display of the ID number currently

assigned to a monitor, and the ID number currently set for IDLK (if any).

Example:

(After executing IDLK0002)

IDCK0000

(Parameter has no meaning.)

 

 

Returned response. The ID

ID : 001

IDLK : 002

number is also displayed on the

 

 

monitor screen.

IDCK000 +

Repeater control. (If a command

WAIT

 

is used with repeater control, ID

 

designation using IDSL or IDLK

ID : 001 IDLK : 000

is canceled.)

 

ID : 002 IDLK : 000

 

ID : 003

IDLK : 000

 

ID : 004

IDLK : 000

 

31 E

Image 31
Contents PN-E802 A. only Model No Serial NoImportant Information Refer Servicing to Qualified Service PersonnelDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationDo not place the monitor on a device which generates heat Supplied Components ContentsNFront view Part NamesSignal transmitter Part Names NRemote control unitPower button See Mute button See 11 E Connecting Peripheral EquipmentConnection with a PC or AV equipment Connecting Peripheral Equipment 13 E Connecting the Power CordBinding Cables Removing the Handles16.4 Preparing the Remote Control UnitInstalling the batteries Remote control operation range15 E Turning Power On/OffTurning on the main power Turning power on/offTurning Power On/Off NDate/time setting Disabling power on/off operationsMenu Basic Operation17 E MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by Dot19 E Menu ItemsDisplaying the menu screen NPICTURE Menu item detailsMenu Items NSCREEN21 E Menu Items NSETUPNAUDIO NOPTION Menu Items NMULTI 23 ENDual screen display Menu Items NPIP/PbyPNEnlarge Menu Items NZOOM2 Special SettingSetting procedure 25 EInput PowerMenu Items NSCHEDULE DAY of the Week27 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentTemperature Alert ALL ResetAdjustment Lock Adjustment Lock TargetPC connection Communication procedureControlling the Monitor with a PC RS-232C 29 ENID numbers NCommunication intervalWait ← 31 ESetting of the Gamma user data 33 E RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu Controlling the Monitor with a PC RS-232C Picture menu 35 EControlling the Monitor with a PC RS-232C Audio menu Setup menuControlling the Monitor with a PC RS-232C Option menu 37 EControlling the Monitor with a PC RS-232C Multi menu Image Position Epos settingLandscape orientation Portrait orientation 39 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 41 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 43 EControlling with a PC Controlling the Monitor with a PC LANInformation about this monitor appears Standby mode, Power on is the operation availableAccept IP Address User Name / Password45 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 47 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error49 E TroubleshootingTroubleshooting NProduct Specifications Specifications51 E NDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power ManagementNCompatible signal timing AV Specifications NCompatible signal timing PC53 E NPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pins55 E Secure using 2 cover screws M4 with washers suppliedPN-E802 Mu EN12D1

PNE802, PN-E802 specifications

The Sharp PN-E802 and its variant, PNE802, represent the pinnacle of professional display technology, designed to meet the demanding needs of various commercial environments. With a massive 80-inch diagonal screen, these displays offer an immersive visual experience, making them ideal for use in meeting rooms, conference halls, retail spaces, and control rooms.

One of the key features of the Sharp PN-E802 is its 4K Ultra HD resolution, providing stunning clarity and detail. With a resolution of 3840 x 2160 pixels, images and text appear razor-sharp, allowing viewers to see every detail, which is essential for presentations and video content. The widescreen aspect ratio enhances the cinematic experience, ideal for videos and detailed graphics.

Equipped with advanced LCD technology, the PN-E802 showcases vibrant colors and deep blacks, further enhanced by Sharp's proprietary UV2A technology. This technology improves color accuracy and enhances brightness, ensuring that images remain vivid even in well-lit environments. The display supports a wide color gamut, encompassing a broader range of colors to produce more accurate and lifelike images.

Moreover, the PN-E802 boasts an integrated digital signage function, making it suitable for dynamic content displays. Users can easily manage and update content via a USB connection, allowing for seamless integration into existing systems. This feature is particularly useful for businesses that need to display rotating advertisements or informational content.

Another noteworthy characteristic of the Sharp PN-E802 is its robust build and reliability. Designed for 24/7 operation, this display can withstand constant use without compromising performance. It also features a sleek design, making it an aesthetic addition to any corporate or public space.

Finally, connectivity options abound with the PN-E802, including multiple HDMI, DisplayPort, and DVI inputs, allowing for a versatile array of connection types. This ensures compatibility with various devices, from computers to media players, making installation and integration into existing AV systems straightforward.

In summary, the Sharp PN-E802 and PNE802 models are high-performance displays that combine advanced technology, exceptional image quality, and versatile functionality, making them an excellent choice for any professional setting. Whether for presentations, signage, or collaborative work, these displays deliver an unparalleled viewing experience that stands out in any environment.