Sharp PN-E802, PNE802 Specifications NDimensional Drawings, NPower management, NDDC plug and play

Page 52

Specifications

nDimensional Drawings

Note that the values shown are approximate values.

4-13/16

[123]

2-3/41-15/16

[70] [49]

43-1/16 [1094]

70-11/16 [1795]

VESA holes *

Unit: inch [mm]

 

 

7-7/8 7-7/8

 

 

[200]

[200]

73-9/16 [1869]

1-15/16 [49]

3-15/16 3-15/16

[100]

[100]

Opening width (70 [1778])

 

 

 

 

height (39-1/2 [1004])

 

7-7/8 [200]

 

Opening

 

 

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws.

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch

(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

nPower management

This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in

order for the monitor’s power management function to work.

DPMS: Display Power Management Signaling

DPMS

Screen

Power

Hsync

Vsync

consumption

 

 

 

 

 

ON STATE

Display

265 W*1

Yes

Yes

STANDBY

No

 

No

Yes

SUSPEND

1.0 W*1*2

Yes

No

 

display

 

 

 

OFF STATE

 

No

No

 

 

DMPM: Digital Monitor Power Management

DMPM

Screen

Power

consumption

 

 

 

 

 

Monitor ON

Display

265 W*1

Active OFF

No display

1.0 W*1*2

*1 When PN-ZB01 (optional) is not connected.

*2 When AUTO INPUT CHANGE is set to OFF.

nDDC (plug and play)

The monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters

is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect

plug-and-play monitors.

There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

E52

Image 52
Contents PN-E802 Model No Serial No A. onlyRefer Servicing to Qualified Service Personnel Important InformationDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationDo not place the monitor on a device which generates heat Contents Supplied ComponentsPart Names NFront viewSignal transmitter Part Names NRemote control unitPower button See Mute button See 11 E Connecting Peripheral EquipmentConnection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord Binding CablesRemoving the Handles 13 EPreparing the Remote Control Unit Installing the batteriesRemote control operation range 16.4Turning Power On/Off Turning on the main powerTurning power on/off 15 EDisabling power on/off operations Turning Power On/Off NDate/time settingBasic Operation 17 EMute MenuBasic Operation NSwitching the screen size Wide Zoom NormalDot by Dot Cut off19 E Menu ItemsDisplaying the menu screen Menu item details Menu ItemsNSCREEN NPICTURE21 E Menu Items NSETUPNAUDIO NOPTION 23 E Menu Items NMULTIMenu Items NPIP/PbyP NDual screen displayMenu Items NZOOM2 Special Setting Setting procedure25 E NEnlargePower Menu Items NSCHEDULEDAY of the Week InputAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 27 EALL Reset Adjustment LockAdjustment Lock Target Temperature AlertCommunication procedure Controlling the Monitor with a PC RS-232C29 E PC connectionNCommunication interval NID numbers31 E Wait ←Setting of the Gamma user data RS-232C command table Power control/Input mode selectionHow to read the command table 33 EControlling the Monitor with a PC RS-232C Screen menu 35 E Controlling the Monitor with a PC RS-232C Picture menuSetup menu Controlling the Monitor with a PC RS-232C Audio menu37 E Controlling the Monitor with a PC RS-232C Option menuControlling the Monitor with a PC RS-232C Multi menu Image Position Epos settingLandscape orientation Portrait orientation 39 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN41 E To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PC43 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationStandby mode, Power on is the operation available Information about this monitor appearsUser Name / Password 45 EDNS Server Accept IP AddressInstallation Information NAME/LOCATION AuthenticationAccount Name / Password Monitor Name47 E Recipient E-MAIL AddressesCondition ConfirmationSnmp Setting Trap SettingTrap Setting of Authentication Error VersionTroubleshooting 49 ETroubleshooting NProduct Specifications Specifications51 E Specifications NDimensional Drawings NPower managementDmpm Digital Monitor Power Management NDDC plug and playNCompatible signal timing AV Specifications NCompatible signal timing PC53 E Specifications NPC/AV DVI-D input terminal pins NPC D-sub input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pinsSecure using 2 cover screws M4 with washers supplied 55 EPN-E802 Mu EN12D1

PNE802, PN-E802 specifications

The Sharp PN-E802 and its variant, PNE802, represent the pinnacle of professional display technology, designed to meet the demanding needs of various commercial environments. With a massive 80-inch diagonal screen, these displays offer an immersive visual experience, making them ideal for use in meeting rooms, conference halls, retail spaces, and control rooms.

One of the key features of the Sharp PN-E802 is its 4K Ultra HD resolution, providing stunning clarity and detail. With a resolution of 3840 x 2160 pixels, images and text appear razor-sharp, allowing viewers to see every detail, which is essential for presentations and video content. The widescreen aspect ratio enhances the cinematic experience, ideal for videos and detailed graphics.

Equipped with advanced LCD technology, the PN-E802 showcases vibrant colors and deep blacks, further enhanced by Sharp's proprietary UV2A technology. This technology improves color accuracy and enhances brightness, ensuring that images remain vivid even in well-lit environments. The display supports a wide color gamut, encompassing a broader range of colors to produce more accurate and lifelike images.

Moreover, the PN-E802 boasts an integrated digital signage function, making it suitable for dynamic content displays. Users can easily manage and update content via a USB connection, allowing for seamless integration into existing systems. This feature is particularly useful for businesses that need to display rotating advertisements or informational content.

Another noteworthy characteristic of the Sharp PN-E802 is its robust build and reliability. Designed for 24/7 operation, this display can withstand constant use without compromising performance. It also features a sleek design, making it an aesthetic addition to any corporate or public space.

Finally, connectivity options abound with the PN-E802, including multiple HDMI, DisplayPort, and DVI inputs, allowing for a versatile array of connection types. This ensures compatibility with various devices, from computers to media players, making installation and integration into existing AV systems straightforward.

In summary, the Sharp PN-E802 and PNE802 models are high-performance displays that combine advanced technology, exceptional image quality, and versatile functionality, making them an excellent choice for any professional setting. Whether for presentations, signage, or collaborative work, these displays deliver an unparalleled viewing experience that stands out in any environment.