Sharp XG-P25X operation manual Connecting to a computer using the RS-232C Port

Page 22

Setup Connections&

Projecting Computer Images

Connecting to a computer using the RS-232C Port

When the RS-232C port on the projector is connected to a computer with an RS-232C serial control cable (cross type, sold separately), the computer can be used to control the projector and check the status of the projector. See pages 68 , 69 and 70 for details.

Connect an RS-232C serial control cable (cross type, sold separately) to the serial port on the computer. See page 67 for recommended connection of an RS-232C serial control cable.

RGB cable

Computer audio cable

	RS-232C serial control cable	Computer
	AN-C10RS	Computer
	AN-C10RS
	(sold separately)

CAUTION

•Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer.

•The wireless mouse or RS-232C function may not operate if your computer port is not correctly set up. Please refer to the operation manual of the computer for details on setting up/installing the correct mouse driver.

•A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized LCD Projector Dealer or Service Center.

Connecting to a computer using the direct digital input port

3	Computer audio cable

4 To audio output terminal

DVI cable (sold separately)

1 AN-C3DV

Computer

2 To digital output terminal

1Connect one end of the DVI cable to the INPUT 3 port on the projector.

2 Connect the other end to the corresponding terminal on a computer.

3 To use the built-in audio system, connect one end of the supplied computer audio cable to the AUDIO INPUT 2/ 3 terminal on the projector.

4 Connect the other end to the audio output terminal on the computer.

•This DVI port is DVI version 1.0 compatible. Therefore when the signal is input from copy guard system compatible (DVI version 2.0) equipment, no signal will be received.

•The analog RGB signal inputs on the DVI port are only compatible with separate sync.

E-19

XG-P25X/CD (E)-b

19

02.3.19, 7:04 PM

Image 22

Contents XG-P25X Model No. XG-P25X Serial No XG-P25X/CD/SUP Introduction EnglishProduct Disposal Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts Wall or Ceiling MountingPrecaución Précaution BQC-XGP25X//1 Using the Kensington Lock Temperature Monitor FunctionUsing the Carrying Handle Lamp Monitor FunctionOutstanding Features Computer CompatibilityTwo Optional Lenses for Maximum Flexibility Contents Multiple Function For other operating systems For other languages To Install Acrobat Reader from the CD-ROMFor Windows For Macintosh For WindowsProjector Part NamesSpeakers Foot releases Remote Control Using as a Wired Remote Control Using the Remote ControlAvailable Range of the Remote Control Inserting the batteriesSupplied Accessories AccessoriesOptional Accessories Connecting the Power Cord Power SupplyConnections Projecting Computer Images Connecting the Projector to a ComputerConnecting to a computer using the standard 15-pin Input ComputerPlug and Play function when connecting to a 15-pin terminal Projecting Computer ImagesConnecting to a computer using the RS-232C Port Connecting to a computer using the direct digital input portExample Watching Video ImagesLaser disc player For Better Sound Connecting to an amplifier and other audio componentsWatching Component Video Images AmplifierPress Power on Power ON/OFFPress Power OFF Using the Adjustment Feet Setting Up the ScreenUsing the Lens Shift Size setting Remote control Digital Image AdjustmentsKeystone setting Digital shift settingNormal Mode Adjusting the Projection DistanceStandard Setup Front Projection Stretch ModeUpper and Lower Lens Shift Position Adjusting the Projection DistanceUpper and Lower Lens Shift Position Ceiling Mount Standard Lens Throw distance ratio 11.8 to AN-P9MX AN-P48EZ Rear Projection Projection Using a MirrorImage Projection Ceiling-mount ProjectionAdjusting the Volume Using the Operation ButtonsSelecting the Input Signal Source Muting the SoundSuperimposing a Black Screen Displaying a Still ImageMagnifying a Specific Portion of an Image Press Enlarge Pan Around the ScreenDisplaying and Setting the Break Timer Computer Image Adjustments using Auto SyncAdjusting the Picture Aspect Ratio ComputerAdjusting the Picture Aspect Ratio VideoGamma Correction Function Example RGB modePresentation Input 4, 5 Video mode Using the GUI Graphical User Interface Menu ScreenGUI On-screen Display Input 1, 2 RGB or 3 Digital mode Basic OperationsMain menu Items on the Input 1, 2 or 3 Mode Menu BarMenu Bars Sub menuItems on the Input 4 or 5 Mode Menu Bar Menu BarsSelecting the Signal Type RGB menu only Adjusting the PictureAdjusting the Color Temperature RGB input in Input 1 or 2 modeSelects the progressive conversion mode 2D Progressive Progressive ModeAdjusting the Picture Film ModePhase Adjusting the Computer Images RGB menu onlySaving and Selecting Adjustment Settings ClockChecking the Input Signal Special Mode AdjustmentAdjusting the Computer Images RGB menu only Off Auto Sync AdjustmentAuto Sync Display Function NormalSpeaker Adjusting the SoundAudio Out Selected item ButtonDisplaying Dual Pictures RGB menu only Reducing Image Noise Video menu onlySelected item Description Normal Setting the Video Signal Video menu onlyTurning On/Off the On-screen Display Level aSelecting a Startup Image Selected item Description Sharp Sharp default image CustomSelecting a Background Image None Black screenAutomatic Power Shutoff Function Selecting the Economy ModePower Save Function Monitor Out/RS-232C Off FunctionConfirming the Lamp Usage Time Reversing/Inverting Projected ImagesSetting the Stacking Mode Locking the Operation Buttons on the ProjectorDeselecting Inputs Selecting the Transmission Speed RS-232CSetting the ID No Controling Multiple Projectors with ID NumbersSetting the Password Protecting Important Settings with a PasswordChanging the Password Input 1, 2 RGB or 3 Digital mode Displaying the Adjustment SettingsSelecting the On-screen Display Language Using Extended Functionality Features InternetUsing Extended Functionality Features Multiple and group projector control via computerStack Projection Videowall Condition Problem Possible Solution Lamp/Maintenance IndicatorsMaintenance Indicators LampReplacing the Lamp Removing and installing the lamp unitPress Power OFF Bottom filter coverInsert the new lamp cage cover.Attach the lamp cage Resetting the lamp timerCover.Remove the lamp cage Replacing the Air Filter Cleaning and replacing the bottom air filterCleaning the side air filter not removable Cover.Replace the filterTroubleshooting Problem CheckFor Sharp Assistance Connecting Pin Assignments Input 3 DVI Port 29-pinPC control RS-232C Specifications and Command SettingsCommands Communication conditionsRS-232C Specifications and Command Settings Model Name Sharp remote control signal format Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Function and transmission codesCompatibility Chart VGADimensions Units inches mmSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCGlossary Aspect ratioIndex BorderSharp Corporation