Sharp XG-P25X operation manual Power ON/OFF, Press Power on, Press Power OFF

Page 25

Power ON/OFF

Projector

Remote control

Press POWER ON.

 

 

• The blinking green LAMP REPLACEMENT indicator

 

 

shows that the lamp is warming up. Wait until the

 

POWER

indicator stops blinking before operating the projector.

 

• If the power is turned off and then immediately turned

 

 

on again, it may take a short while before the lamp

 

 

turns on.

 

 

• After the projector is unpacked and turned on for the first

 

 

time, a slight odor may be emitted from the exhaust vent.

 

 

This odor will soon disappear with use.

 

 

When the power is on, the LAMP REPLACEMENT

 

 

indicator lights, indicating the status of the lamp.

 

 

Green: Lamp is ready.

 

 

Green blinking: Warming up.

 

 

Red: Change the lamp.

LAMP REPLACEMENT indicator

Setup & Connections

 

On-screen Display

 

Press POWER OFF.

 

 

 

Press POWER OFF again while the message is

 

 

 

displayed to turn off the power.

 

 

 

• If you accidentally pressed POWER OFF and do not want

 

 

 

 

to turn off the power, wait until the power off screen

 

 

 

 

disappears.

 

 

 

• When the power is turned off, the POWER indicator will light

 

 

 

 

up red and the cooling fan will run for about 90 seconds.

 

 

 

 

The projector will then enter standby mode.

 

 

 

• Wait until the cooling fan stops before disconnecting the

 

 

 

 

power cord.

 

 

 

• The power can be turned on again by pressing POWER

 

 

 

 

ON. When the power is turned on, the POWER indicator

 

 

 

 

and the LAMP REPLACEMENT indicator light green.

 

 

 

• The POWER indicator flashes if the bottom filter cover is

 

 

 

 

not securely installed.

 

 

 

 

 

 

 

 

 

WARNING:

 

 

 

 

The cooling fan in this projector continues to run for

 

 

 

 

about 90 seconds after the projector is turned off.

 

 

 

 

During normal operation, when turning the power off

 

 

 

 

always use the POWER OFF button on the projector or

 

 

 

 

on the remote control. Ensure the cooling fan has

 

 

 

 

stopped before disconnecting the power cord.

 

 

 

 

DURING NORMAL OPERATION, NEVER TURN THE

 

 

 

 

PROJECTOR OFF BY DISCONNECTING THE POWER

 

 

 

 

CORD. FAILURE TO OBSERVE THIS WILL RESULT IN

 

 

 

 

PREMATURE LAMP FAILURE.

 

 

 

 

 

E-22

XG-P25X/CD (E)-b

22

02.3.19, 7:04 PM

Image 25
Contents XG-P25X Model No. XG-P25X Serial No XG-P25X/CD/SUP English IntroductionProduct Disposal Accessories CleaningPower Sources Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check Wall or Ceiling MountingPrecaución Précaution BQC-XGP25X//1 Using the Carrying Handle Temperature Monitor FunctionUsing the Kensington Lock Lamp Monitor FunctionComputer Compatibility Outstanding FeaturesTwo Optional Lenses for Maximum Flexibility Contents Multiple Function For Windows For Macintosh To Install Acrobat Reader from the CD-ROMFor other operating systems For other languages For WindowsProjector Part NamesSpeakers Foot releases Remote Control Available Range of the Remote Control Using the Remote ControlUsing as a Wired Remote Control Inserting the batteriesSupplied Accessories AccessoriesOptional Accessories Connecting the Power Cord Power SupplyConnections Connecting to a computer using the standard 15-pin Input Connecting the Projector to a ComputerProjecting Computer Images ComputerProjecting Computer Images Plug and Play function when connecting to a 15-pin terminalConnecting to a computer using the direct digital input port Connecting to a computer using the RS-232C PortExample Watching Video ImagesLaser disc player Watching Component Video Images Connecting to an amplifier and other audio componentsFor Better Sound AmplifierPress Power on Power ON/OFFPress Power OFF Using the Adjustment Feet Setting Up the ScreenUsing the Lens Shift Keystone setting Remote control Digital Image AdjustmentsSize setting Digital shift settingStandard Setup Front Projection Adjusting the Projection DistanceNormal Mode Stretch ModeUpper and Lower Lens Shift Position Adjusting the Projection DistanceUpper and Lower Lens Shift Position Ceiling Mount Standard Lens Throw distance ratio 11.8 to AN-P9MX AN-P48EZ Image Projection Projection Using a MirrorRear Projection Ceiling-mount ProjectionSelecting the Input Signal Source Using the Operation ButtonsAdjusting the Volume Muting the SoundDisplaying a Still Image Superimposing a Black ScreenPress Enlarge Pan Around the Screen Magnifying a Specific Portion of an ImageComputer Image Adjustments using Auto Sync Displaying and Setting the Break TimerComputer Adjusting the Picture Aspect RatioVideo Adjusting the Picture Aspect RatioGamma Correction Function Example RGB modePresentation GUI On-screen Display Input 1, 2 RGB or 3 Digital mode Using the GUI Graphical User Interface Menu ScreenInput 4, 5 Video mode Basic OperationsMenu Bars Items on the Input 1, 2 or 3 Mode Menu BarMain menu Sub menuMenu Bars Items on the Input 4 or 5 Mode Menu BarAdjusting the Color Temperature Adjusting the PictureSelecting the Signal Type RGB menu only RGB input in Input 1 or 2 modeAdjusting the Picture Progressive ModeSelects the progressive conversion mode 2D Progressive Film ModeSaving and Selecting Adjustment Settings Adjusting the Computer Images RGB menu onlyPhase ClockChecking the Input Signal Special Mode AdjustmentAdjusting the Computer Images RGB menu only Auto Sync Display Function Auto Sync AdjustmentOff NormalAudio Out Adjusting the SoundSpeaker Selected item ButtonReducing Image Noise Video menu only Displaying Dual Pictures RGB menu onlyTurning On/Off the On-screen Display Setting the Video Signal Video menu onlySelected item Description Normal Level aSelecting a Background Image Selected item Description Sharp Sharp default image CustomSelecting a Startup Image None Black screenPower Save Function Selecting the Economy ModeAutomatic Power Shutoff Function Monitor Out/RS-232C Off FunctionReversing/Inverting Projected Images Confirming the Lamp Usage TimeLocking the Operation Buttons on the Projector Setting the Stacking ModeSelecting the Transmission Speed RS-232C Deselecting InputsControling Multiple Projectors with ID Numbers Setting the ID NoSetting the Password Protecting Important Settings with a PasswordChanging the Password Input 1, 2 RGB or 3 Digital mode Displaying the Adjustment SettingsSelecting the On-screen Display Language Internet Using Extended Functionality FeaturesMultiple and group projector control via computer Using Extended Functionality FeaturesStack Projection Videowall Maintenance Indicators Lamp/Maintenance IndicatorsCondition Problem Possible Solution LampPress Power OFF Removing and installing the lamp unitReplacing the Lamp Bottom filter coverInsert the new lamp cage cover.Attach the lamp cage Resetting the lamp timerCover.Remove the lamp cage Cleaning the side air filter not removable Cleaning and replacing the bottom air filterReplacing the Air Filter Cover.Replace the filterProblem Check TroubleshootingFor Sharp Assistance Input 3 DVI Port 29-pin Connecting Pin AssignmentsCommands RS-232C Specifications and Command SettingsPC control Communication conditionsRS-232C Specifications and Command Settings Model Name Specifications of wired remote control input Wired Remote Control Terminal SpecificationsSharp remote control signal format Function and transmission codesVGA Compatibility ChartUnits inches mm DimensionsPAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsAspect ratio GlossaryBorder IndexSharp Corporation