Sharp XG-P20XU operation manual Watching Video Images, Example, Laser disc player

Setup Connections&

Watching Video Images

Connecting to a VCR, laser disc player and other audiovisual equipment using the standard video Input

	S-video cable (sold separately)
	Example
	To S-video output terminal
Video cable (sold separately)
1	VCR
	To video output terminal

or

Laser disc player

2

Audio cable (sold separately)

To audio output terminals

1 Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and the Video output terminal on the video source.

2 To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.

The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image.

•For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately.

•If your video equipment does not have an S-video output terminal, use a composite video cable.

CAUTION

•Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment being connected.

E-17