Sharp XG-P20XU Replacing the Air Filter, Cleaning and replacing the bottom air filter

Page 71

Replacing the Air Filter

This projector is equipped with two air filters to ensure the optimal operating condition of the projector.

The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location.

Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter (PFILD0080CEZZ) when it is no longer possible to clean it.

Bottom View

Side and Rear View

Air filter

Air filter (not removable)

Cleaning and replacing the bottom air filter

Turn off the power and

Remove the bottom

3

Remove the air filter.

1 disconnect the power

2 filter cover.

 

cord.

 

 

 

Press POWER OFF. Wait until

Turn over the projector. Press the

Grasp the air filter between your

the cooling fan stops.

tab and lift open the filter cover

fingers and lift it out of the filter

Push the antenna completely

in the direction of the arrow.

cover.

down to its resting position.

 

 

 

 

Tab

 

 

4 Clean the air filter.

5 Replace the air filter.

6 cover.Replace the filter

Clean the dust off the air filter

Place the air filter underneath

Insert the tab on the end of the

and cover with a vacuum

the tabs on the filter frame.

filter cover into the filter cover

cleaner extension hose.

 

opening and press the filter

 

 

cover into position.

 

 

Tab

Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.

Troubleshooting

Maintenance&

 

 

Cleaning the side air filter (not removable)

If dust or dirt has collected inside the air filter, clean the filter with a vacuum cleaner extension hose.

The side air filter cannot be removed.

E-70

Image 71
Contents XG-P20XU English IntroductionImportant Safeguards Projector Important SafeguardsUsing the Kensington Lock Temperature Monitor FunctionUsing the Carrying Handle Computer Compatibility Outstanding FeaturesNetwork Capability Contents Multiple Function For other operating systems For other languages To Install Acrobat Reader from the CD-ROMFor Windows For Macintosh Front View Part NamesInserting and removing the batteries GyroRemoteOptional cables AccessoriesSupplied Accessories Connections Power SupplyConnecting the Power Cord Projecting Computer Images Connecting the Projector to a ComputerConnecting to a computer using the standard 15-pin Input Projecting Computer Images Plug and Play function when connecting to a 15-pin terminalConnecting to a computer using the direct digital input port Connecting to a computer using the RS-232C PortLaser disc player Watching Video ImagesExample Amplifier Connecting to an amplifier and other audio componentsWatching Component Video Images For Better SoundFlashing green Warming up Power ON/OFFOn-screen Display Using the Lens Shift Setting Up the ScreenUsing the Adjustment Feet Digital shift setting Digital Image AdjustmentsKeystone setting Size settingThrow Distance Adjusting the Projection DistanceStandard Setup Front Projection Upper and Lower Lens Shift Position Ceiling Mount Adjusting the Projection DistanceUpper and Lower Lens Shift Position Standard Lens Throw distance ratio 11.8 to AN-W6EZ AN-T6EZ AN-P9MX AN-P48EZ Ceiling-mount Projection Projection Using a MirrorImage Projection Rear ProjectionMulti-Projector Control GyroRemote FeaturesIntroducing GyroRemote RF TechnologyMouse Control GyroRemote FeaturesGesture tracking Projector ControlOperating the screen pointer Using GyroRemoteMenu Adjustments PreparationAll Button Assign selections Using GyroRemoteFunction Assign Displaying the Break Timer Using the Presentation ToolsOperating the mouse Connecting the projector to the computerUsing the mouse Confirming the present RF channel Setting up GyroRemoteSetting RF channels Switching RF channelsOperating multiple projectors with one GyroRemote Setting up GyroRemoteUsing multiple GyroRemotes to operate one projector Turning off GyroRemote Using as a Wired Remote ControlUsing the GyroRemote with a wired remote control cable Using the IR remote control as a wired remoteMuting the Sound Using the Operation ButtonsSelecting the Input Signal Source Adjusting the VolumeDisplaying a Still Image Superimposing a Black ScreenPan Around the Screen Magnifying a Specific Portion of an ImageComputer Adjusting the Picture Aspect RatioGamma Correction Function On-screen Display Example RGB modeBasic Operations Using the GUI Graphical User Interface Menu ScreenSub menu Items on the Input 1, 2 or 3 Mode Menu BarMenu Bars Main menuMenu Bars Items on the Input 4 or 5 Mode Menu BarRGB input in Input 1 or 2 mode Adjusting the PictureAdjusting the Color Temperature Selecting the Signal Type RGB menu onlyFilm Mode Progressive ModeAdjusting the Picture Selects the progressive conversion mode 2D ProgressiveClock Adjusting the Computer Images RGB menu onlySaving and Selecting Adjustment Settings PhaseAdjusting the Computer Images RGB menu only Special Mode AdjustmentChecking the Input Signal Normal Auto Sync AdjustmentAuto Sync Display Function OffSelected item Button Adjusting the SoundAudio Out SpeakerReducing Image Noise Video menu only Displaying Dual Pictures RGB menu onlyTurning On/Off the On-screen Display Setting the Video Signal Video menu onlySelecting a Startup Image Selecting a Background ImageMonitor Out/RS-232C Off Function Selecting the Economy ModeAutomatic Power Shutoff Function Reversing/Inverting Projected Images Confirming the Lamp Usage TimeLocking the Operation Buttons on the Projector Setting the Stacking ModeSelecting the Transmission Speed RS-232C Deselecting InputsControling Multiple Projectors with ID Numbers Setting the ID NoChanging the Password Protecting Important Settings with a PasswordSetting the Password Selecting the On-screen Display Language Displaying the Adjustment SettingsInternet Using Extended Functionality FeaturesMultiple and group projector control via computer Using Extended Functionality FeaturesStack Projection Videowall Lamp Lamp/Maintenance IndicatorsMaintenance Indicators Replacing the Lamp Removing and installing the lamp unitReplacing the Lamp Resetting the lamp timerReplacing the Air Filter Cleaning and replacing the bottom air filterCleaning the side air filter not removable For Sharp Assistance U.S.A. only TroubleshootingInput 3 DVI Port 29-pin Connecting Pin AssignmentsCommunication conditions RS-232C Specifications and Command SettingsCommands PC controlRS-232C Specifications and Command Settings Model Name Transmission control code Internal GNDVGA Computer Compatibility ChartUnits inches mm DimensionsPAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsAspect ratio GlossaryIndex Sharp Corporation