Vidikron VL-57 manual Timer VL-52 only

Page 47

Operation

To set the DView’s internal clock or configure the on/off timers, select Timer from the Main Menu and press ENTER.

Time: To set the DView internal clock, select Time from the Timer menu and press ENTER. Then, do either of the following:

•To synchronize the internal clock with time codes sent by the local Public Broadcasting Service (PBS) member station, select Auto Setup. The display must be connected to an off-air antenna or CATV system in order for this to work.

•To manually set the clock, use the up- or down-arrow button to select the hour of the day, AM/PM or the minute of the hour to set. Then, use the left- or right-arrow buttons to set that component of the time.

When finished, press MENU or EXIT.

On Timer: Use the On Timer to turn the DView on at a specific time of day. You can also specify a channel and a volume level.

Off Timer: Use the Off Timer to turn the DView off at a specific time of day.

Sleep Timer: Use the Sleep Timer to turn off the DView after a specified interval.

To set the Sleep Timer:

•Select Sleep Timer from the Timer menu and press ENTER. Use the right- or left-arrow button to select 10, 30, 60, 120 or 180 minutes. Then, press MENU.

– OR –

•Press the TIMER OFF button on the remote control repeatedly to select the desired timer interval.

Time Zone: To set the local (North American) time zone, select Time Zone from the Timer menu and press ENTER. Use the up- or down-arrow button to select Eastern, Central, Mountain, Pacific, Alaska or Hawaii. Press ENTER to confirm your selection.

Daylight Saving: If you are in a region that observes Daylight Saving Time (DST), select Daylight Saving from the Timer menu and set it to Automatic to have the DView automatically adjust the time (one hour ahead on the first Sunday in April; one hour back on the last Sunday in October). The display must be connected to an off-air antenna or CATV system in order for this to work.

You can also manually adjust the time to reflect DST. Set Daylight Saving to On if DST is currently in effect. Set it to Off if DST is not currently in effect or not observed in your region at all.

Timer (VL-52 only)

Timer

Time

On Timer

Off Timer

Sleep Timer

Time Zone

Daylight Saving

Vidikron VL-52 and VL-57 Owner’s Operating Manual

35

Page 46 Page 48
Image 47
Page 46 Page 48
Contents VL-52 and VL-57 Page For LCD Displays ONE Year Limited WarrantyRIGHTS, Limits and Exclusions Vidikron Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part 1Table of Contents Serial Communications Maintenance and TroubleshootingSpecifications Operation1List of Figures List of Figures Xii About This Manual 1IntroductionIf you need Turn to Using This ManualThey also provide supplemental information Performance or cause a malfunctionKey Features and Benefits Description, Features and BenefitsOptional Accessories DView at a Glance Controls and IndicatorsVolume Adjustment Buttons VOL / VOL + 2Controls and FunctionsCH / CH Power Button Remote Control Sensor Status Indicator LEDINPUT2 S-Video Input Headphone Jack Main Power SwitchINPUT3 Component Video RCA connectors INPUT4 Component Video RCA connectorsCable Input VL-52 only AIR Antenna Input VL-52 onlyDView Remote Control DView Remote ControlSource Selection Buttons Memory Preset ButtonsOFF / on Numeric ButtonsWide IntelliWide Aspect Ratio Selection Buttons ANA 169 Anamorphic4X3 Standard Letbox LetterboxChannel Selection Short-Cuts VL-52 only Timer OFF ButtonSound Control Buttons Surrnd SurroundTo install batteries in the remote control 3InstallationRemote Control Step Procedure For Details, refer to Quick SetupInstallation Overview Ambient Light Installation ConsiderationsWall-Mounting the DView Antenna/Cable TV Connection Connections to the DViewHdmi Connections Rear of the Display Rear of the PC DVD/DTV STB AV OUT Connections Amplifier Connecting ExternalSpeakers Optional Rear Panel Connector Pin AssignmentsConnection Changing the OSD Language Turning on the Power4Operation Setting the PC Display Properties Using the On-Screen Menus Source Picture AdjustTimer VL-52 SetupAspect Ratio Main MenuSource Control Description Aspect Ratio SettingsPicture Adjust Perform the adjustments in the order listed hereTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Audio Channel VL-52 only Timer VL-52 only Auto Adjust may take some time to complete, depending on SetupRating/Category Description FCC Ratings and Content CategoriesLetterbox Mode = Letterbox Operation Should be used by ISF-certified technicians only ISF Calibration100 DView Splash Screen Aspect Size Position PIPUsing Picture-In-Picture PIP Video Available Main and PIP Source CombinationsChanging the PIP Aspect Ratio Changing the PIP PositionChanging the PIP Size Images Audio Programs Swap button on the remote controlMono+SAP Broadcast Mode Receive Mode Mono StereoStereo Sound/SAP VL-52 only Compatibility with Stereo and SAP Audio BroadcastsOperation Troubleshooting Chart 5Maintenance and TroubleshootingCleaning Troubleshooting TipsComputer Signal 6Serial Communications Serial Command SyntaxRS-232 Connection and Port Configuration Serial CommandsS4E Command DescriptionSDB 0027 0024 Serial Communications DView Specifications 7SpecificationsSpecifications are subject to change without notice Weight including stand Regulatory Approvals Limited WarrantyVL-52 Dimensions DView DimensionsVL-57 Dimensions Signal Mode Vertical Frequency Horizontal Computer/Video Signal Compatibility ChartComputer Signal Compatibility Specifications Page Vidikron

VL-57, VL-52 specifications

The Vidikron VL-52 and VL-57 are high-performance projection television models that encapsulate advanced technology and design, aimed at delivering an exceptional viewing experience. Manufactured during an era when home theater systems were evolving, these models became known for their cutting-edge features and superior picture quality, setting a benchmark in the projection television market.

The VL-52 features a 52-inch screen size, while the VL-57 sports a larger 57-inch display, both offering expansive viewing areas ideal for home cinema setups. One of the key characteristics of these models is their use of a high-resolution CRT (Cathode Ray Tube) technology, which provides vibrant colors and deep blacks, enhancing the overall image quality. The zoned convergence adjustment allows users to fine-tune the picture, ensuring that colors align perfectly across the entire screen.

In terms of features, both models support various video formats, including 480i, 480p, and 1080i, allowing for high-definition viewing on compatible content. The inclusion of multiple inputs, such as component, composite, and S-Video, ensures that users can connect a variety of devices, from DVD players to gaming consoles, easily. This versatility makes the VL-52 and VL-57 attractive options for consumers seeking a comprehensive entertainment solution.

The technologies integrated into these models also contribute to their performance. The onboard video processing capabilities enhance image clarity and reduce motion blur, making fast-paced action scenes more enjoyable. Furthermore, both models are equipped with an advanced color management system, which ensures that colors remain true to the source material, providing viewers with a lifelike experience that is reminiscent of the cinema.

Another noteworthy characteristic is the build quality. The Vidikron VL-52 and VL-57 feature a robust and elegant design, making them a fitting centerpiece in any home theater setup. The attractive cabinet work and premium materials used in their construction reflect the brand's commitment to quality and aesthetics.

Overall, the Vidikron VL-52 and VL-57 remain iconic models, blending technology, performance, and design. As home entertainment continues to evolve, these projectors stand as a testament to the innovation that defined their era, offering features and characteristics that can still impress enthusiasts today.
Top Page Image Contents