Sharp XR-32S-L, XR-32X-L Switching the Input Mode, Adjusting the Volume, On-screen display

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press COMPUTER, DVI (XR-32X only), S-VIDEO or VIDEO on the remote con- trol to select the input mode.

•When you press INPUT on the projector or DVI on the remote control (XR-32X only), the INPUT

list appears.

Press P/R to switch the INPUT mode.

COMPUTER,

DVI (XR-32X only),

S-VIDEO, VIDEO buttons AV MUTE button

VOL +/– (Volume) buttons

Adjusting the Volume

Press VOL +/– on the remote control or

–O/Q+on the projector to adjust the vol- ume.

Note

• Pressing VOL–/–Owill lower the volume.
• Pressing VOL+/Q+ will raise the volume.	On-screen display

•When the projector is connected to external equipment, the volume level of the external equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/ off or when changing the input signal.

•When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 45.)

Displaying the Black Screen and Turning off the Sound Temporarily

Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound.

On-screen display

Note

•Pressing AV MUTE again will turn the pro- jected image back on.

OperationBasic

29