Sharp XR-32S-L, XR-32X-L Adjusting the Projected Image SCR ADJ Menu, Setting the Resize Mode

Adjusting the Projected Image

(“SCR - ADJ” Menu)

Menu operation n Page 38

	Picture	SCR - ADJ	PRJ - ADJ	Help
1	Resize		Border
2	Image Shift	0
3	Keystone	0
4	OSD Display		On
5	Background		Logo
6	Setup Guide		On
7	PRJ Mode		Front
8	Language		English
	SEL./ADJ.	ENTER		END

1 Setting the Resize Mode

Note

•For details of the Resize mode, see pages 30 and 31.

•You can also press RESIZE on the remote con- trol to set the resize mode. (See page 30.)

2 Adjusting the Image Position

3 Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.

Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar.

See page 28 for details of Keystone Correction.

Q button O button

You can move the projected image vertically.

O button Q button

Note

•This function only works in some RESIZE modes. (See pages 30 and 31.)

Note

•The Keystone Correction can be adjusted up to an angle of approximately ±40 (XR-32X)/ ±20 (XR-32S) degrees (when “Resize” is set to “Normal”).

•You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction.

4 Setting the On-screen Display

Selectable	Description
items
On	All on-screen displays are displayed.
Off	INPUT/VOLUME/AV MUTE/FREEZE/
	AUTO SYNC/RESIZE/PICTURE MODE/
	ECO+QUIET/MAGNIFY/ “An invalid
	button has been pressed.” are not
	displayed.

Features Useful

43