Operating with the Remote Control
BREAK TIMER button
FREEZE button | Displaying the Pointer |
MAGNIFY buttons
POINTER button
SPOT button
Adjustment buttons
(P/R/O/Q)
EFFECT button 
PICTURE MODE button
ECO+QUIET button
AUTO SYNC button
1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.
•Press EFFECT to change the pointer icon (5 types).
Star | Finger1 | Finger2 | Heart | Underline |
|
|
|
|
|
2 Press POINTER again.
• The pointer will disappear.
Displaying and Setting the Break Timer
1 Press BREAK TIMER.
•The timer starts to count down from 5 minutes.
On-screen display
Using the Spot Function
1 Press SPOT and press P/R/O/Q on the remote control to move the spot area.
• Press EFFECT to change the spot area size (3 types).
1/9 | 1/25 | 1/8 |
|
|
|
Press P/R/O/Q to adjust the
2 length of the break time.
•Increases with P or Q
5 minutes s 6 minutes s 60 minutes
•Shortens with O or R
4 minutes s 3 minutes s1 minute
•The break time can be set in units of one minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
Note
•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.
2 Press SPOT again.
• The spot area will disappear.
Switching the Eco+Quiet Mode
Press ECO+QUIET to switch the Eco+Quiet mode between on and off.
•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.
Note
•Refer to “Lamp Setting” on page 42 for de- tails of the Eco+Quiet mode.
32