Adjusting the Projector Function (“PRJ-ADJ” Menu)
Menu operation n Page 41
Picture | Video |
| |
Auto Search |
|
| Off |
Auto Power Off |
| Off | |
Auto Restart |
|
| Off |
ECO + Quiet |
|
| Off |
Lamp Mode |
|
| Both Lamps |
Audio |
|
|
|
Ex. Setting |
|
|
|
Reset |
|
|
|
Information |
|
|
|
MENU = END | SEL./ADJ. | SEL. |
Picture | Video |
| ||
|
| Ex. Setting |
|
|
Fan Mode |
|
|
| Normal |
STANDBY Mode |
|
| Standard | |
Standby Audio Out |
|
| On | |
Filter Message |
|
| 500H | |
3D MODE |
|
|
|
|
LAN/RS232C |
|
|
| LAN |
Network |
|
|
|
|
MENU = END | SEL./ADJ. | SEL. |
1 Detecting the Input
Signals Automatically
This function enables the projector to detect the received signal and to switch the Input mode automatically when the power is turned on.
Selectable items | Description |
On | Automatically searches for and |
| switches to the input mode in |
| which signals are being |
| received. |
|
|
Off | Auto Search does not function. |
Note
•While the “Auto Search” function is detecting the input signal, pressing a button on the projector or the remote control stops the “Auto Search” function. After the “Auto Search” function fi nishes completely, press the desired button.
2 Auto Power Off Function
Selectable | Description | |
items | ||
| ||
|
| |
On | When no input signal is detected for | |
| more than 15 minutes, the projector will | |
| automatically enter Standby mode. | |
Off | The Auto Power Off function will be | |
| disabled. |
3 Auto Restart Function
Selectable | Description | |
items | ||
| ||
|
| |
On | If the power cord is unplugged from the | |
| outlet or the breaker switch is turned off | |
| when the projector is on, then the | |
| projector automatically turns on when | |
| the power cord is plugged into the AC | |
| outlet or the breaker switch is turned on. | |
|
| |
Off | The projector does not turn on | |
| automatically when the power cord is | |
| plugged into the AC outlet or the | |
| breaker switch is turned on. |
To activate the Auto Restart function, you need to switch the MAIN POWER switch on the projector to “ON”.
4Eco+Quiet
Selectable | Brightness and Power consumption | |
items | ||
| ||
On | Approx. 83% | |
|
| |
Off | 100% |
Note
•When “Eco+Quiet” is set to “On”, the fan sound and power consumption are lower than they are when “Off” is selected. (Projection brightness decreases as shown in the chart.)
52