Sharp XG-PH80W-N Setting the Lamp Mode, Setting the Audio,  Using the Ex. Setting, Standby Mode

Page 57

5 Setting the Lamp Mode

This function allows you to select the usage of the two lamps installed in the projector.

Selectable items

Description

Both Lamps

Both lamps are used for greater

 

brightness.

Lamp 1 Only

The lamp 1 is used.

 

When the lamp 1 burns out, the

 

lamp 2 automatically switches in

 

use.

 

 

Lamp 2 Only

The lamp 2 is used.

 

When the lamp 2 burns out, the

 

lamp 1 automatically switches in

 

use.

 

 

Equal Use

The lamp whose remaining life

 

time is the longer is used.

Note

•For lamp protection, this function is not available for several minutes when changing the lamp mode.

6 Setting the Audio

You can set the following Audio items.

Selectable

 

Description

items

 

 

 

 

 

 

Volume

You can change the volume level.

 

The adjustable range is 0 to 60.

 

 

 

Speaker

On

The audio signal is output

 

 

from the internal speaker.

 

Off

The audio signal is not output

 

 

from the internal speaker.

Note

•The audio signal is not output from the speaker of the projector when the audio cable is connected to the audio output terminal and you cannot change the setting.

Using the Ex. Setting

Select “Ex. Setting” and then press (ENTER) to set “Fan Mode”, “STANDBY Mode”, “STANDBY Audio Out”, “Filter Message”, “3D MODE”, “LAN/ RS232C” or “Network”.

Menu operation n Page 41

8 Fan Mode Setting

This function changes the fan rotation speed.

Selectable

Description

items

 

 

 

Normal

Suitable for normal environments.

High

Set when using the projector at

 

altitudes of approximately 1,200 meters

 

(4,000 feet) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

9 STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

Selectable

Description

items

 

Standard

The monitor output, LAN/RS232C and

 

Network functions are activated even if

 

the projector is in Standby mode.

Eco

The monitor output, LAN/RS232C and

 

Network functions are switched off in

 

Standby mode.

0 STANDBY Audio Out

You can set audio output from the AUDIO OUTPUT terminal of the projector that is in Standby mode.

Selectable

Description

items

 

 

 

On

The audio signal is output from the

 

AUDIO OUTPUT terminal in Standby

 

mode.

 

 

Off

The audio signal is not output from the

 

AUDIO OUTPUT terminal in Standby

 

mode.

Note

•When “Eco” is selected for “STANDBY Mode”, “STANDBY Audio Out” is set to “Off” automatically and you cannot change the setting.

Features

Useful

53

Page 56 Page 58
Image 57
Page 56 Page 58
Contents XG-PH80W-N XG-PH80X-N Model No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Maintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Reference Adjusting the Projector Function PRJ ADJ MenuPower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOptional lens installation Other connected equipmentWhen you want to view the Setup Manual For WindowsFor Macintosh Optional accessories AccessoriesLens Type Projection Distance for 100 Screen Size Throw Distance16 17 18 19 Part Names and Functions11 14 15 Using the Kensington LockCOMPUTER/COMPONENT1 input terminals 21 COMPUTER/COMPONENT2 input terminals 21Connection using a USB cable Computer keyboard, when with the USBFor setting items selected or adjusted on For adjusting the focusInserting the Batteries Usable RangeReplace the cover Easy Start Setup and ProjectionAdjust the angle Video Setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionCeiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Monitor OUT Computer Controlling the Projector by a ComputerSide view To RS-232C terminalWhen connecting to the LAN terminal using a LAN cable Lens will be disengaged Attaching the Optional LensUsing the Anti-Theft Screw Connecting the Power CordPower cord supplied Top position markTurning the Projector On Turning the Projector On/OffAdjustable range When moving upward or downwardImage Projection Shifting the LensRotate the adjustment feet to adjust the projected angle Using the Adjustment FeetROn-screen display DownAdjusting the Focus Adjusting the Projected Image SizeFocus buttons Zoom buttons On-screen display Keystone Correction mode Adjustment buttons P/R/O/Q Menu buttonCorrecting Trapezoidal Distortion Press O or Q to correct the image distortion Press MenuAdjusting the Volume Switching the Input ModePress VOL +/- on the remote control to adjust the volume Displaying the Black ScreenResize Mode Adjustment buttons P/R/O/Q Enter button Menu buttonOutput screen image About Copyrights Auto Sync Auto Sync Adjustment Operating with the Remote ControlPress Auto Sync to manually adjust with Auto Sync function Freezing a Moving ImageWhen moving the cursor Using the Remote Control to Operate the ComputerWhen using Enter When using Page Up or Page DownPicture menu Menu ItemsVideo menu Projector adjustment PRJ-ADJ menu Using the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press O or Q to adjust the item selected To adjustItems to be adjusted Press P or R and select BrightPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Color Temperature Adjusting the Image Using the Ex. Setting Adjusting the Red/Blue Selecting the Film Mode Adjusting the Colors0Setting the Dynamic Black Adjusting Hue, Saturation, or ValueAdjusting Computer Image Signal Adjustment SIG-ADJ MenuAuto Sync Auto Sync Adjustment Setting the Resolution1Setting the Overscan Video Adjustment Video MenuSetting the Video System When reproducing Ntsc signals in PAL video equipmentSetting the Video Setup Closed CaptionFor Americas only Setting the Resize Mode Adjusting the Projected Image SCR-ADJ MenuSelecting the Background Image Reversing/Inverting Projected ImagesKeystone Correction  Using the Ex. SettingSelecting the Wall Color Image ResizingSecurity Lock Function Canceling a PasswordKeypad Lock Function Image CaptureAuto Power Off Function Detecting the Input Signals AutomaticallyAuto Restart Function Eco+QuietSetting the Audio Setting the Lamp Mode Using the Ex. Setting Fan Mode SettingSetting the LAN/RS232C Adjusting the Projector Function PRJ-ADJ MenuSetting the Network Filter MessageAll Reset Returning to the Default SettingsFilter Timer Reset InformationViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesEpilepsy To display 3D images, this projector requires Information on the 3D Projection FunctionPress 3D Mode Using 3D Viewing ModeProjecting 3D images Ending 3D projectionAppendix Maintenance Cleaning the projectorCleaning the lens Cleaning the Dust Filters Cleaning and Replacing the Dust FiltersSTANDBY/ON button Main Power switch AC socket Replacing the Dust FiltersFront Side Rear Remove the filter coversMaintenance Indicators About the TEMP. temperature warning/STATUS indicatorAbout the Lamp indicator Speed may change and this is not a malfunction Regarding the Lamp LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitRemove the lamp unit Lamp unitReset the lamp timer Resetting the Lamp TimerReset the lamp timer after replacing the lamp Insert the new lamp unitReplacing the Color Wheel Main Power switch AC socketLoosen the 4 retaining screws From the four-segment colorHandle Computer Compatibility ChartDTV 21-25 Troubleshooting64, 67 3D images fl icker when For Sharp Assistance XG-PH80W-N XG-PH80X-N SpecificationsUnits inches mm DimensionsIndex TEMP. temperature warning/STATUS indicator ··············64
Related manuals
Manual 32 pages 41.27 Kb

XGPH80XN, XG-PH80W-N, XG-PH80X-N specifications

The Sharp XG-PH80X-N and XG-PH80W-N are high-performance projectors designed to cater to the needs of both professional and educational environments. Renowned for their exceptional image quality and versatile features, these models offer a superior projection experience, making them suitable for a range of applications, including presentations, lectures, and even home cinema setups.

One of the standout features of the XG-PH80X-N and XG-PH80W-N is their impressive brightness, rated at 8,000 lumens. This high level of brightness ensures vibrant and clear images, even in well-lit environments. The projectors utilize advanced DLP technology, which enhances color accuracy and contrast, delivering crisp details and rich colors that engage audiences effectively.

The resolution capabilities of both models are noteworthy. While the XG-PH80X-N supports native XGA (1024 x 768) resolution, the XG-PH80W-N is designed for WXGA (1280 x 800), making it a suitable choice for widescreen presentations and content. This dual resolution support allows users to present images and videos with clarity and precision, providing a more immersive viewing experience.

Connectivity is another area where these projectors shine. The XG-PH80X-N and XG-PH80W-N come equipped with multiple input options, including HDMI, VGA, and USB ports, allowing for seamless integration with various devices. This versatility is essential for users who may switch between laptops, video players, and even mobile devices during presentations.

Portability is a key consideration for many users, and both models are designed with this in mind. The lightweight construction and compact design facilitate easy transport between different venues, making them ideal for traveling professionals or educators who frequently move between classrooms.

In terms of longevity and efficiency, these projectors are equipped with long-lasting lamp technology that ensures extended periods of use without the need for frequent replacements. Furthermore, their eco-friendly features help reduce energy consumption, making them a responsible choice for environmentally-conscious users.

In conclusion, the Sharp XG-PH80X-N and XG-PH80W-N projectors stand out for their impressive brightness, resolution options, versatile connectivity, and portability. Their advanced technologies and energy-efficient features make them the perfect choice for anyone seeking a reliable and high-quality projection solution for a wide range of applications.
Top Page Image Contents