Sharp XG-PH80W-N Using 3D Viewing Mode, Projecting 3D images, Ending 3D projection, Press 3D Mode

Page 63

Using 3D Viewing Mode

Use the following procedure to project 3D images.

For operation of the 3D LCD shutter glasses and the 3D-video playback equipment, see the corresponding operation manual.

P/R buttons

(ENTER) button

3D MODE button

Projecting 3D images

1 Turn the projector on.

2Turn the 3D-video playback equipment on.

•Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation

manual.

3Switch the Input mode of the projector to enable input of 3D

video signals.

4Operate the 3D-video playback equipment and play back the 3D

content.

5Turn the 3D LCD shutter glasses

on and place them over your eyes.

6 Press 3D MODE on the remote control to display the 3D MODE menu.

7Press P or R to select “DLP® Link™”, and then select “On”.

8 Select “DLP® Link™ Invert”, and then press (ENTER) to switch the mode and enable more natural 3D image viewing.

Warning!

•If the projector, 3D-video playback equipment, and 3D LCD shutter glasses are not properly set, you may experience eye strain in addition to not being able to view the images in 3D.

9 Press 3D MODE.

• The 3D MODE menu will disappear.

Note

•If the images are not displayed in 3D, repeat steps 6 to 8.

•You can also use “DLP® Link™” and “DLP® Link™ Invert” on the menu screen to change the 3D setting.

Ending 3D projection

1Press 3D MODE on the remote

control to display the 3D MODE menu.

2Press P or R to select “DLP®

 

Link™”, and then select “Off”.

Useful Features

3

Press 3D MODE.

• The 3D MODE menu will disappear.

Note

•You may not be able to enjoy the full 3D effects depending on the installation or usage environment of the projector.

•When you use the 3D projection function, it is recommended that “Lamp Mode” be set to “Both Lamps” and “Eco + Quiet” be switched to “Off”.

59

Page 62 Page 64
Image 63
Page 62 Page 64
Contents XG-PH80W-N XG-PH80X-N Model No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Maintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Reference Adjusting the Projector Function PRJ ADJ MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Other connected equipment Using the projector in other countriesTemperature monitor function Optional lens installationWhen you want to view the Setup Manual For WindowsFor Macintosh Optional accessories AccessoriesLens Type Projection Distance for 100 Screen Size Throw Distance16 17 18 19 Part Names and FunctionsCOMPUTER/COMPONENT2 input terminals 21 Using the Kensington Lock11 14 15 COMPUTER/COMPONENT1 input terminals 21For adjusting the focus Computer keyboard, when with the USBConnection using a USB cable For setting items selected or adjusted onInserting the Batteries Usable RangeReplace the cover Easy Start Setup and ProjectionAdjust the angle Standard Setup Front Projection Setting Up the ProjectorVideo Setup Setting Up the ProjectorCeiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Monitor OUT To RS-232C terminal Controlling the Projector by a ComputerComputer Side viewWhen connecting to the LAN terminal using a LAN cable Lens will be disengaged Attaching the Optional LensTop position mark Connecting the Power CordUsing the Anti-Theft Screw Power cord suppliedTurning the Projector On Turning the Projector On/OffShifting the Lens When moving upward or downwardAdjustable range Image ProjectionDown Using the Adjustment FeetRotate the adjustment feet to adjust the projected angle ROn-screen displayAdjusting the Focus Adjusting the Projected Image SizeFocus buttons Zoom buttons Press O or Q to correct the image distortion Press Menu Adjustment buttons P/R/O/Q Menu buttonOn-screen display Keystone Correction mode Correcting Trapezoidal DistortionDisplaying the Black Screen Switching the Input ModeAdjusting the Volume Press VOL +/- on the remote control to adjust the volumeResize Mode Adjustment buttons P/R/O/Q Enter button Menu buttonOutput screen image About Copyrights Freezing a Moving Image Operating with the Remote ControlAuto Sync Auto Sync Adjustment Press Auto Sync to manually adjust with Auto Sync functionWhen using Page Up or Page Down Using the Remote Control to Operate the ComputerWhen moving the cursor When using EnterPicture menu Menu ItemsVideo menu Projector adjustment PRJ-ADJ menu Using the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press P or R and select Bright To adjustPress O or Q to adjust the item selected Items to be adjustedPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Red/Blue Adjusting the ImageAdjusting the Color Temperature  Using the Ex. SettingAdjusting Hue, Saturation, or Value Adjusting the Colors Selecting the Film Mode 0Setting the Dynamic BlackSetting the Resolution Signal Adjustment SIG-ADJ MenuAdjusting Computer Image Auto Sync Auto Sync AdjustmentWhen reproducing Ntsc signals in PAL video equipment Video Adjustment Video Menu1Setting the Overscan Setting the Video SystemSetting the Video Setup Closed CaptionFor Americas only Reversing/Inverting Projected Images Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode Selecting the Background ImageImage Resizing  Using the Ex. SettingKeystone Correction Selecting the Wall ColorImage Capture Canceling a PasswordSecurity Lock Function Keypad Lock FunctionEco+Quiet Detecting the Input Signals AutomaticallyAuto Power Off Function Auto Restart FunctionFan Mode Setting Setting the Lamp ModeSetting the Audio  Using the Ex. SettingFilter Message Adjusting the Projector Function PRJ-ADJ MenuSetting the LAN/RS232C Setting the NetworkInformation Returning to the Default SettingsAll Reset Filter Timer ResetViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesEpilepsy To display 3D images, this projector requires Information on the 3D Projection FunctionEnding 3D projection Using 3D Viewing ModePress 3D Mode Projecting 3D imagesAppendix Maintenance Cleaning the projectorCleaning the lens Replacing the Dust Filters Cleaning and Replacing the Dust FiltersCleaning the Dust Filters STANDBY/ON button Main Power switch AC socketFront Side Rear Remove the filter coversMaintenance Indicators About the TEMP. temperature warning/STATUS indicatorAbout the Lamp indicator Speed may change and this is not a malfunction Regarding the Lamp LampReplacing the Lamp Lamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover Remove the lamp unitInsert the new lamp unit Resetting the Lamp TimerReset the lamp timer Reset the lamp timer after replacing the lampReplacing the Color Wheel Main Power switch AC socketLoosen the 4 retaining screws From the four-segment colorHandle Computer Compatibility ChartDTV 21-25 Troubleshooting64, 67 3D images fl icker when For Sharp Assistance XG-PH80W-N XG-PH80X-N SpecificationsUnits inches mm DimensionsIndex TEMP. temperature warning/STATUS indicator ··············64
Related manuals
Manual 32 pages 41.27 Kb

XGPH80XN, XG-PH80W-N, XG-PH80X-N specifications

The Sharp XG-PH80X-N and XG-PH80W-N are high-performance projectors designed to cater to the needs of both professional and educational environments. Renowned for their exceptional image quality and versatile features, these models offer a superior projection experience, making them suitable for a range of applications, including presentations, lectures, and even home cinema setups.

One of the standout features of the XG-PH80X-N and XG-PH80W-N is their impressive brightness, rated at 8,000 lumens. This high level of brightness ensures vibrant and clear images, even in well-lit environments. The projectors utilize advanced DLP technology, which enhances color accuracy and contrast, delivering crisp details and rich colors that engage audiences effectively.

The resolution capabilities of both models are noteworthy. While the XG-PH80X-N supports native XGA (1024 x 768) resolution, the XG-PH80W-N is designed for WXGA (1280 x 800), making it a suitable choice for widescreen presentations and content. This dual resolution support allows users to present images and videos with clarity and precision, providing a more immersive viewing experience.

Connectivity is another area where these projectors shine. The XG-PH80X-N and XG-PH80W-N come equipped with multiple input options, including HDMI, VGA, and USB ports, allowing for seamless integration with various devices. This versatility is essential for users who may switch between laptops, video players, and even mobile devices during presentations.

Portability is a key consideration for many users, and both models are designed with this in mind. The lightweight construction and compact design facilitate easy transport between different venues, making them ideal for traveling professionals or educators who frequently move between classrooms.

In terms of longevity and efficiency, these projectors are equipped with long-lasting lamp technology that ensures extended periods of use without the need for frequent replacements. Furthermore, their eco-friendly features help reduce energy consumption, making them a responsible choice for environmentally-conscious users.

In conclusion, the Sharp XG-PH80X-N and XG-PH80W-N projectors stand out for their impressive brightness, resolution options, versatile connectivity, and portability. Their advanced technologies and energy-efficient features make them the perfect choice for anyone seeking a reliable and high-quality projection solution for a wide range of applications.
Top Page Image Contents