Codec C90
Contents | Introduction | Getting started |
Best view—Face recognition
This camera is capable of face recognition when used with TANDBERG C90 Codecs. Consequently, the functionality is subject to change without further notice in order to take advantage of further developments.
NOTE: Observe that the Best view feature is still a preview feature.
The face recognition system aims to search for faces in order to optimize the picture frame, hence the name Best view. Once a face or group of faces has been detected camera zoom and camera angle will be changed accordingly to obtain an optimal presentation on the screen.
Kindly observe the following:
Administrator Guide
About the menus | About the settings | Settings Library |
| Camerasa eras | Appendices | Contact us |
|
|
|
|
|
|
|
•The Best view optimization process may take up to 5 seconds.
•The detection of faces works better when people look towards the camera.
•The area from the eyebrows down to just below the lips should be uncovered.
•Beard is normally not a problem.
Using Best view
Note that Best view works with TANDBERG C90 Codecs only!
1.Press the 
Layout key on the remote control to display the Layout menu. Select Selfview to be shown as required.
2.Press the 
Home key on the remote control to display the Home menu and select Camera control
3.In the Camera control menu, locate the Best view button at the bottom of the screen.
4.Press the corresponding Soft key on the remote control to start the Best view optimization process. Look towards the camera for about five seconds.
5.The system will now look for human faces and adjust the zoom and camera angle to obtain a best fit.
The Best view feature is found in the Camera control menu.
Best view (beta) | Exit |
Press the corresponding Soft key to start the Best view optimization process.
36 |