Visioneer 8600 manual Installing to a USB Port, Installing the Paperport Software

Page 9

INSTALLING TO A USB PORT

5

Part 1: Installing

INSTALLING TO A USB PORT

This section of the guide contains instructions for connecting your OneTouch scanner to a USB port. Please see “Installing to a Parallel Port” on page 10 to connect the scanner to a parallel port.

STEP 1: INSTALLING THE PAPERPORT SOFTWARE

Note: You must install the PaperPort software before connecting the scanner to the computer. Otherwise the correct software to run your scanner will not be installed and it may not scan properly.

The PaperPort CD includes all the necessary installation ﬁles, as well as PaperPort software ﬁles and other software ﬁles.

The CD also includes the PaperP ort User ’s Guide. You can read the guide from the CD, or print a copy directly from the CD.

To install the PaperPort software:

1.Start Microsoft Windows 98 and make sure that no other applications are running.

Microsoft Windows 98 is required to connect the scanner to a USB port.

2.Insert the PaperPort CD into your computer’s CD-ROM drive. The CD automatically starts.

Note: If the PaperPort CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, the Autorun option on your computer is turned off. Click the Windows icon named My Computer. The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of ﬁles on the CD. Double-click the ﬁle named START32.EXE. The CD starts.

Image 9

Contents Visioneer OneTouch Scanner P Y R I G H T I N F O R M a T I O N B L E O F C O N T E N T S Iv Table of Contents WHAT’S in the BOX WelcomeVisioneer Onetouch 8600 Scanner Visioneer ONE Touch 8600 Scanner Getting the Paperport Software USER’S Guide What YOU NeedInstalling to a USB Port Installing the Paperport SoftwareTo install the PaperPort software Connecting to a USB Port To connect the OneTouch scanner to a USB port Unlocked position Power On/Off switch Installing to a Parallel Port Connecting to a Parallel PortTo connect the scanner to a parallel port Installing to a Parallel Port Power cord Parallel cable to Computer Printer Turn on the power to the scanner Installing the Paperport Software To check the status of the scanner Checking OUT Your ScannerSee Scanning by Pressing the OneTouch Buttons on If the Scanner is not Properly Connected To connect the scanner Three Ways to Scan Scan with the Scanner ButtonsScan from the Screen To scan by pressing a button on the scanner Scan from the PaperPort Software or Other Twain SoftwareTo scan from the screen Scanning from the Button Panel on the ScreenVisioneer Onetouch 8600 Scanner Installation Guide About the Onetouch Buttons Button Preconﬁgured SettingsSetting is to scan as a bitmap for a single page item About the Configuration Dialog BOXTo display the Conﬁguration dialog box Getting Help To select new options for a scanner button Selecting NEW Options for the ButtonsCreating NEW Configurations To adjust the scan settings and page settings Adjusting Scan Settings and page SettingsVisioneer Onetouch 8600 Scanner Installation Guide About the Onetouch Buttons Visioneer Onetouch 8600 Scanner Installation Guide About the Onetouch Buttons Visioneer Onetouch 8600 Scanner Installation Guide About Jpeg Compression To set preferences Setting PreferencesAbout the Onetouch Buttons Visioneer Onetouch 8600 Scanner Installation Guide Scanning from the Paperport Software To set up the PaperPort software with the scannerTo scan an item Scanning AN Item with the Twain ButtonScanning from the Paper Port Software Visioneer Onetouch 8600 Scanner Installation Guide Thumbnail image Bitmap icon To adjust the brightness and contrast Adjusting the Brightness and ContrastGetting Help with the Paperport Software Scan Page For Default Setting To Scan Description About the Predefined Scan Settings in PaperportCleaning the Scanner Glass Visioneer Onetouch Scanner Specifications