Visioneer Strobe XP 200 manual Connect and Calibrate the Scanner

Page 10

6VISIONEER STROBE XP 200 SCANNER INSTALLATION GUIDE

12.On the Visioneer Registration screen, complete the required information and click Register.

13.When you see the Connect Scanner window, do NOT click Finish. Leave the window open and proceed to the next section, “Step 2: Connect and Calibrate the Scanner”.

STEP 2: CONNECT AND CALIBRATE THE SCANNER

The Visioneer Strobe XP 200 scanner connects to any available USB port. Check your computer’s manual for USB port locations.

Note: You can connect the scanner to your computer while the computer is running. You do not have to shut down your computer.

To connect your Visioneer Strobe XP 200 scanner:

1.Plug the AC adaptor cable into the power jack on the USB/power cable, and then plug the AC adapter into an electrical outlet.

2.Plug the XP 200 connector on the USB/power cable into the port on the back of the scanner.

3.Plug the USB connector on the USB/power cable into any USB port on your computer.

Image 10

Contents Visioneer Strobe XP USB Scanner Installation Guide P Y R I G H T I N F O R M a T I O N B L E O F C O N T E N T S Ii Table of Contents Welcome WHAT’S in the BOXVisioneer Strobe XP 200 Scanner An IBM-compatible Pentium PC with What YOU NeedDocumentation VGA or Svga MonitorInstall the Software To install the softwareInstall the Software Connect and Calibrate the Scanner To connect your Visioneer Strobe XP 200 scannerTo calibrate the scanner Scanner Icon To open a dialog box to view and edit scanner settings To view basic scanner informationPrint Guides and Install Other Software Scanning Paper Return OptionsScanner Settings To set scanner settings Double-clickScanners and CamerasScanning Using the Autoscan Feature To scan using AutoScanConfiguring the Autoscan Feature To open the Configuration dialog boxAbout the Configuration Dialog BOX Configuring the Autoscan Feature Selecting NEW Settings for Autoscan To select new settings for AutoScanCreating a NEW Autoscan Configuration To create a new configurationVisioneer Strobe XP 200 Scanner Installation Guide Editing Autoscan Configurations To edit a configurationSetting Preferences To set preferencesConfiguring the Autoscan Feature Scanning from the Paperport Software To scan an item from PaperPort Scan pane Click the Scan button to open the Scan Manager Click Save As to save scan settings for future use Visioneer Strobe XP 200 Scanner Installation Guide To change a profile you created To create a new profileTo delete a profile you created Scanning from a Computer Running Windows XP To scan an itemScan pane To select the scanner settings before you scan Scanning from the Paper Port Software Recalibrating Your Scanner To recalibrate your scanner for Windows 98, 2000, or MeTo recalibrate your scanner for Windows XP Visioneer Strobe XP 200 Scanner Installation Guide Troubleshooting Problem How do I uninstall PaperPort? Uninstalling Your Scanner Uninstalling the Visioneer Onetouch SoftwareUninstalling the Paperport Software Visioneer Strobe XP 200 Scanner Specifications Visioneer Strobe XP 200 Scanner Installation Guide D E Index