Telex P170 user manual Height and Focus Adjustments

Figure 13.

Height and Focus

Adjustments

4.Adjust the room lighting for optimum screen viewing. (The projec- tor lamp is automatically turned on when the P170/P170v is turned on.) You may press the LAMP button to turn off the projector lamp until your presentation begins.

5.Adjust the screen focus by rotating the lens (Figure 13).

Sliding Lens Cover Door Focus Adjustment

TELEX MagnaByte P170

Foot Release Bar
	Remote Control Sensor

6.To adjust the vertical position of the image on the viewing screen:

a.Lift the front of the projector.

b.Press the foot release bar shown in Figure 13.

c.Raise or lower the projector as desired, then release the bar.

☞NOTE: The keypanel and on-screen control settings will be the same as they were when the P170/P170v was last used, if five seconds were allowed to elapse before the P170/P170v was turned off.

7.To improve the imgage phase adjustment, display a colorful image on the computer screen and select the on-screen FOCUS control. (It is easier to adjust the MagnaByte® P170/P170v with a colorful im- age.)

8.Turn on your audio source (CD player, wireless microphone, amplifier auxiliary audio output, etc.).

9.Press VOLUME to adjust the volume of the P170/P170v built-in speakers.

14 User Manual