CONTROLS
The P170/P170v keypanel and Menu Mode On-Screen controls allow you to customize the projected image and enhance the appearance of your presentation. The function of each keypanel and on-screen control is described below and the keypad is shown in Figure 14.
☞NOTE: When any keypad key is pressed, the active source indicator LED will turn off while the key is pressed.
Keypanel Controls
This key controls the display of on-screen “menu” and graphic information. If an on-screen “menu” or graphic item is displayed, pressing this key will make the display disappear (on-screen displays normally disappear after five seconds). To enter “menu” mode and access the on-screen “menu” functions, press and release MENU, then press either the up or
Figure 14.
MagnaByte®
P170/P170v
Keypad
COMPUTER 1 | COMPUTER 2 | POWER |
TV 1 | TV 2 | S-VHS | REPLACE |
| | | LAMP |
down arrow key to “step” through the “menu” until the desired Menu Mode On-Screen Control is displayed. When the P170/P170v is in on-screen “menu” mode, only the Menu Mode On-Screen Controls are functional.
BRIGHTNESS CONTRAST VOLUME
☞NOTE: All controls have on-screen graphics to indicate their relative value or selection setting.