☞NOTE: If you have an external powered speaker system plugged into the OUTPUT AUDIO jack, turn it on and adjust the volume of that external system. (The level at the OUTPUT AUDIO jack is controlled by
VOLUME .)
10.Turn on and play the connected VCR, LaserDisc player, etc. (P170v model only.)
11.Press SOURCE on the P170/P170v keypanel to select one of the com- puter inputs, as indicated by the SOURCE LEDs shown in Figure 12. (Only the P170v can also select from two composite video and one
12.To further enhance or change the image on the MagnaByte® P170/P170v, refer to the Keypanel and Menu Mode
☞NOTE: Five seconds after you make a change, the image enhancements that you have made will be saved. These saved enhancements will be used as the default settings the next time that you activate your P170/P170v.
☞
☞
13.When you are not projecting an image, press LAMP to turn off the projection lamp.
14.After the MagnaByte® P170/P170v has cooled, turn it off.
NOTE: To use your computer and monitor without disconnecting them from the P170/P170v, the P170/P170v must be plugged into an AC wall outlet and turned on. The OUTPUT MONITOR jack on the MagnaByte® P170/P170v requires power to operate the computer monitor.
NOTE: The projector lamp does not need to be on to use the OUTPUT MONITOR jack.
User Manual 15