Telex P170 user manual Reset

RESET	To reset the MagnaByte® P170/P170v image to the original factory
	settings, press and hold RESET until the on-screen display indicates
	READY TO RESET (approximately five seconds). When the key is
	released the P170/P170v will reset, clearing all image enhancements that
	you have made, restoring the factory settings as the default settings. (If
	RESET is released before READY TO RESET is displayed, the factory
	settings will not be restored.)
SOURCE	Press SOURCE to select video and audio input from COMPUTER 1,
	COMPUTER 2, TV 1, TV 2, S-VHSjacks. If only one video source is
	“live,” the screen will go blank for a moment, then return control to the
	“live” video source. (If your desktop LCD projector is not a P170v,
	COMPUTER 1, and COMPUTER 2 will be the only video sources
	available.)
LAMP	Press LAMP to turn off the projector lamp. Press LAMP again to
	turn on the projector lamp. (The lamp is on when the P170/P170v is
	turned on.)
Alignment	Press , , , or , to move the image left, right, up, or down.
	When the adjustment limit is reached, the LED will flash slowly.
☞	NOTE: The Alignment controls are functional only when the
	P170/P170v is not in “menu” mode.
BRIGHTNESS	Press the upper button of the BRIGHTNESS control to increase the overall
	image brightness. Press the lower button of the BRIGHTNESS control to
	decrease the overall image brightness. When either adjustment limit is
	reached, the LED will flash slowly.
CONTRAST	Press the upper button of the CONTRAST control to make the color
	image more vivid. Press the lower button of the CONTRAST control to
	provide greater definition to the color image in the subtle shading areas.
	When either adjustment limit is reached, the LED will flash slowly.
VOLUME	Press the upper button of the VOLUME control to increase the volume
	of the built-in speakers, or increase the level at the OUTPUT AUDIO
	jack. Press the lower button of the VOLUME control to decrease the
	volume of the built-in speakers, or decrease the level at the OUTPUT
	AUDIO jack. When either adjustment limit is reached, the currently
	active LED will flash slowly.
F1	The F1 key can be programmed as a shortcut to any Menu Mode
	On-Screeen control that you feel you regularly need to use without going
	through the on-screen “menu” to access. To begin programming the F1
	key, first access the desired Menu Mode On-Screen Control, then press
	F1 and the F1 on-screen graphic will appear. Press F1 a second time to

User Manual 17