Menu Description and Navigation, » Opening Screen

MENU DESCRIPTION AND NAVIGATION

When the MENU button is pressed on either the remote control or the rear panel, the main menu will appear on-screen. An example of the main menu is shown to the right. The UP and DOWN buttons on the rear panel, and IR Remote Control will

move the selected item on the menu.

»Opening Screen

•Press ENTER to access the Input Source selection menu

•Press ENTER to access the Aspect Ratio selection menu

•Press ENTER to access the Picture setting menu

•Press ENTER to access the Input Position setting menu

•Press ENTER to access the ISF and Custom Presets menu

•Press ENTER to view Information about the Projector

The active source is indicated by an arrow to the left of the source; note that in the example to the right, Composite is the current source.

»Input Source

Indicates selection has been made for the Input Source selection menu

•Press ENTER to select the Composite input

•Press ENTER to select the S-Video 1 input

•Press ENTER to select the S-Video 2 input

•Press ENTER to select the Component SD input

•Press ENTER to select the HD/RGB 1 input

•Press ENTER to select the HD/RGB 2 input

•Press ENTER to select the DVI 1 input

•Press ENTER to select the DVI 2 input

•Press ENTER to select the HD Pass Thru 1 input

•Press ENTER to select the HD Pass Thru 2 input

To select a source via the main menu, press either the up or down buttons on the remote or rear panel and highlight the desired source, and press ENTER. Otherwise, you may select a source by pressing either the left or right arrow buttons (on the remote or rear panel) when no menus are on- screen, or by pressing one of the direct access buttons on the remote control (recommended).

Calibration

>Input Source Aspect Ratio Picture Input Position ISF Presets Information Calibration Service

Input Source

>Composite S Video 1

S Video 2

Component SD

HD/RGB 1

HD/RGB 2

DVI 1

DVI 2

HD Pass Thru 1

HD Pass Thru 2