|
| ||
|
|
|
|
Troubleshooting |
|
| |
|
|
|
|
| Symptom | Solution | |
|
|
|
|
| Punched holes are not centered. | Adjust the edge guide and use scrap paper to test if the holes are centered. | |
|
|
|
|
| Machine will not punch. | Check that the paper waste tray is empty and correctly fitted. Check for | |
| blockage in the paper entry | ||
|
| ||
|
|
|
|
| Punched holes are not parallel to the edge. | Take a stiff object and slide it sideways through the paper entry to release any | |
| paper clippings into the paper waste tray. | ||
|
| ||
|
|
|
|
| Holes are partially punched. | Ensure that the punching capacity is not exceeded. Adjust edge guide and use | |
| scrap paper to test if holes are properly punched. | ||
|
| ||
|
|
|
|
| Hole edges are damaged. | Reduce the number of sheets being punched. |
Waste tray is leaking.
Check that the paper waste tray is empty and correctly fitted.
If you are still having complications, please contact Royal Sovereign’s Service Center at
9