Motorola SVG1501UE Pptp PassThrough, Remote Config Management, Multicast Enable, UPnP Enable

	B
Field	Description
PPTP PassThrough	Enables the Point-to-Point Tunneling Protocol (PPTP) Pass-
	Through protocol to be used through the SVG1501
	Configuration Manager so that a VPN device (or software)
	may communicate properly with the WAN.
	Select Enable to turn on.
Remote Config Management	Allows remote access to the SVG1501 Configuration
	Manager. This enables you to configure the SVG1501 WAN
	by accessing the WAN IP address at Port 8080 of the
	configuration manager from anywhere on the Internet. For
	example, in the browser URL window, type
	http://WanIPAddress:8080/ to access the SVG1501
	Configuration Manager remotely.
	Select Enable to turn on.
Multicast Enable	Allows multicast-specific traffic (denoted by a multicast
	specific address) to be passed to and from the PCs on the
	private network behind the configuration manager.
	Select Enable to turn on.
UPnP Enable	Turns on the Universal Plug and Play protocol (UPnP) agent
	in the configuration manager. If you are running a CPE
	(client) application that requires UPnP, select this box.
	Select Enable to turn on.
Rg PassThrough	Disables NAT operation allowing all client computers to act
	as passthrough clients.
	Select Enable to turn on.
PassThrough Mac Addresses	Specifies up to 32 computers as passthrough clients not
	subject to NAT, using their MAC addresses.
	To enable this feature, your cable operator may need to
	provide additional public IP addresses.

Click Apply to save changes.

6 • Advanced Pages 32