Motorola SVG1501E, SVG1501UE manual Firewall Local Log, Firewall Remote Log, Permitted Connections

B

Select each Web filter you want to set for the firewall, and then click Apply. The Web filters will activate without having to reboot the SVG1501 Configuration Manager.

Note: At least one Web filter or feature must be enabled for the firewall to be active. Make sure the firewall is not disabled.

Firewall Local Log Page

Set up notification of the firewall event log in either of the following formats:

•Individual e-mail alerts sent each time the firewall is under attack

•Local log stored within the modem and displayed on the Local Log page

Firewall Remote Log Page

Send firewall attack reports to a standard SysLog server so multiple instances can be logged over a period of time. Select individual attack or configuration items to send to the SysLog server so that only the items of interest will be monitored. You can log permitted connections, blocked connections, known Internet attack types, and CMRG configuration events. The SysLog server must be on the same network as the Private LAN behind the Configuration Manager (typically 192.168.0.x).

To activate the SysLog monitoring feature, check all desired event types to monitor and enter the last byte of the IP address of the SysLog server. Normally, the IP address of this SysLog server is hard-coded so that the address does not change and always agrees with the entry on this page.

Field Description for the Firewall Remote Log Page

Field	Description
Permitted Connections	Select to have the server e-mail you logs of who is
	connecting to your network.
Blocked Connections	Select to have the server e-mail you logs of who is blocked
	from connecting to your network.

7 • Firewall Pages 41