Linksys RV082 manual VPN tab Client to Gateway

Page 57

10/100 8-Port VPN Router

Tunnel Name: Enter the Tunnel Name, such as LA Office, Branch Site, Corporate Site, etc. This is to allow you to identify multiple tunnels, and does not have to match the name used at the other end of the tunnel.

Interface: All VPN tunnels go out through one of the Router’s WAN ports. When Dual-WAN is enabled, you will

have the option of two ports: WAN1 or WAN2.

Enable: Checking this box enables the VPN tunnel you’re creating.

Local Group Setup

The Local Group Setup section configures the local settings for the VPN tunnel you are creating. Remember, all settings for the Local Group must be exactly the same as those for the Remote Group.

Local Security Gateway Type: There are five types. They are IP Only, IP + Domain Name (FQDN) Authentication, IP + E-mail Addr. (USER FQDN) Authentication, Dynamic IP + Domain Name (FQDN) Authentication, Dynamic IP + E-mail Addr. (USER FQDN) Authentication. The type of Local Security Gateway Type must match the Remote Security Gateway Type of VPN devices in the other end of tunnel. The first three options are easier to use because the IP Addresses are static and do not change.

IP Only: If you select IP Only, only the specific IP Address set will be able to access the tunnel. The Router’s WAN IP address (set above) will automatically appear in this field.

IP + Domain Name (FQDN) Authentication: This selection affords a greater amount of security because each side of the tunnel must use the same IP Address as well as the same domain name. Only one domain name can be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote Group Setup on the other end of the tunnel.

IP + E-mail Addr. (USER FQDN) Authentication: This selection affords a greater amount of security because each side of the tunnel must use the same IP Address as well as the same email. Only one email address can be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote Group Setup on the other end of the tunnel.

Dynamic IP + Domain Name (FQDN) Authentication: This setting uses a dynamic IP address, which is constantly changing. In addition, the tunnel is confirmed through use of a domain name. Only one domain name can be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote Group Setup on the other end of the tunnel.

Dynamic IP + E-mail Addr.(USER FQDN) Authentication: This setting uses a dynamic IP address, which is constantly changing. In addition, the tunnel is confirmed through use of an email address. Only one email address can be used for one tunnel and may not be applied to another tunnel.These settings must match the Remote Group Setup on the other end of the tunnel.

Chapter 5: Setting Up and Configuring the Router

Figure 5-49: VPN tab - Client to Gateway

Figure 5-50: VPN tab - Client to Gateway

Local Group Setup

48

VPN Tab - Client to Gateway

Page 56 Page 58
Image 57
Page 56 Page 58
Contents 10/100 8-Port How to Use this Guide Copyright and TrademarksWord definition Table of Contents Appendix B Installing the Linksys VPN Client Appendix a TroubleshootingAppendix D Physical Setup of the Router Appendix E Battery Replacement10/100 8-Port VPN Router VPN Router-to-VPN Router VPN List of Figures21 Setup Tab Advanced Routing 51 VPN tab Client to Gateway Remote Group Setup Figure C-3 MAC Address/Physical Address Introduction WelcomeIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? Networking Basics An Introduction to LANsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?What is a VPN? VPN Router-to-VPN Router VPN VPN Router to VPN RouterLAN WAN2 WAN1 Getting to Know the RouterBack Panel Power Overview Connecting the RouterConnect a PC Connection InstructionsSetting Up and Configuring the Router Setup TabSystem Summary Tab Dhcp Tab System Management TabDomain a specific name for a network of computers Firewall Tab Port Management TabVPN Tab Log TabHow to Access the Web-based Utility System Summary TabSystem Information Configuration Network Setting StatusPort Statistics Firewall Setting Status VPN Setting StatusLog Setting Status Dual-WAN / DMZ Setting LAN SettingNetwork WAN Connection TypeStatic IP PPPoE Point-to-Point Protocol over Ethernet most DSL usersPptp Point-to-Point Tunneling Protocol Transparent Bridge Heart Beat SignalSetup Tab Time Setup Tab PasswordTime Setup Tab Forwarding Setup Tab DMZ HostPort Triggering Port Range ForwardingSetup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingSetup Dhcp Tab SetupDynamic IP Static IPDhcp Tab Status Network Service DetectionSystem Management Tab Dual-WAN Dual-WANProtocol Binding Bandwidth27 System Management Tab Snmp System Management Tab SnmpSystem Management Tab Diagnostic DNS Name LookupPing System Management Tab Firmware Upgrade System Management Tab Factory DefaultFirmware Upgrade Firmware DownloadSystem Management Tab Setting Backup Port Management Tab Port SetupSystem Management Tab Restart 36 Port Management Tab Port Status Port Management Tab Port StatusFirewall Tab General Restrict WEB features38 Firewall Tab Access Rules Firewall Tab Access RulesAdd a New Access Rule ServicesScheduling Editing an Access Rule Firewall Tab Content FilterForbidden Domains Website Blocking by KeywordsVPN Tab Summary SummaryTunnel Status VPN Clients Status GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup47 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupIPSec Setup ManualBit a binary digit IKE with Preshared Key automatic Advanced VPN Tab Client to Gateway With Tunnel Enabled49 VPN tab Client to Gateway 51 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 52 VPN tab Client to Gateway IPSec Setup 10/100 8-Port VPN Router 53 VPN tab Client to Gateway Advanced 54 VPN tab VPN Client Access VPN Tab VPN Client AccessVPN Tab VPN Pass Through Users SettingVPN Tab Pptp Server IP Address RangeLog Tab System Log Log SettingSyslog Mail59 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup62 Basic Setup Wizard Host and Domain Name 65 Access Rule Wizard What is Access Rules Access Rule Setup67 Access Rule Wizard Select the Service 69 Access Rule Wizard Select the Destination Logout Tab Support TabOn Line Manual Linksys Web SiteCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium 10/100 8-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupTCP Application Start and End Protocol IP Address EnableCan’t get the Internet game, server, or application to work Application Start and End Protocol IP Address EnabledNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Passthrough supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?Which modems are compatible with the Router? How many ports can be simultaneously forwarded?How can I check whether I have static or Dhcp IP addresses? How do I get mIRC to work with the Router?Figure B-2 Linksys VPN Installation Complete Appendix B Installing the Linksys VPN ClientFigure B-3 Linksys QuickVPN Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilitySetting up the Router Appendix D Physical Setup of the RouterPlacement of the Router Rack-Mounting the Router10/100 8-Port VPN Router Figure D-3 Wall-Mounting the Router Wall-Mounting the RouterFigure D-4 Wall-Mounting Hardware Replacing a Lithium Battery Appendix E Battery ReplacementAppendix F Upgrading Firmware Figure F-1 Upgrade FirmwareAppendix G Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix H Glossary 10/100 8-Port VPN Router 10/100 8-Port VPN Router 10/100 8-Port VPN Router Standards Ieee 802.3, 802.3u Ports Appendix I SpecificationsDMZ/Internet Port SPI Firewall, DES and 3DES Encryption for IPSec VPN TunnelLimited Warranty Appendix J Warranty InformationFCC Statement Appendix K Regulatory InformationAppendix L Contact Information Need to contact Linksys?Information section in this Guide

RV082 specifications

The Linksys RV082 is a robust dual WAN VPN router that stands out in the market for small to medium-sized businesses seeking reliable network connectivity and security. Designed to meet the demands of a dynamic business environment, the RV082 offers a host of features that enhance both performance and reliability.

One of the primary attributes of the RV082 is its dual WAN capability. This feature allows businesses to connect to two different internet connections simultaneously, ensuring uninterrupted internet access. In case one connection fails, the router can automatically switch to the other, minimizing downtime and maintaining productivity. This failover capability is essential for businesses that rely heavily on internet connectivity.

The RV082 also boasts impressive VPN support, enabling secure communication between remote users and branch offices. With support for up to 50 simultaneous VPN connections, the router accommodates a growing workforce that may require access to the company’s network from remote locations. This is particularly beneficial for businesses with telecommuting employees or those that operate across multiple locations.

Security is a paramount concern for any business, and the RV082 addresses this with various built-in security features. It utilizes advanced firewall capabilities, including Stateful Packet Inspection (SPI) and Denial of Service (DoS) protection, safeguarding internal networks from external threats. The router also supports strong encryption protocols such as IPSec and PPTP, ensuring that sensitive data transmitted over the VPN remains secure.

Performance-wise, the RV082 includes eight switched LAN ports, allowing numerous devices to connect directly to the network without the need for additional hardware. This feature simplifies network management and helps keep connectivity organized. Furthermore, the router supports Quality of Service (QoS) prioritization, which allows businesses to allocate bandwidth effectively among different applications and users, promoting seamless performance even during high traffic periods.

The user-friendly web-based interface facilitates easy configuration and management, making it accessible for users with varying levels of technical expertise. Additionally, the RV082’s compact design ensures that it can fit into nearly any office environment without taking up too much space.

In summary, the Linksys RV082 is an excellent choice for businesses looking for a dependable and secure networking solution. With its dual WAN capabilities, extensive VPN support, robust security features, and user-friendly management tools, the RV082 successfully meets the challenging needs of modern business networking.
Top Page Image Contents