Linksys RV082 manual Application Start and End Protocol IP Address Enabled

Page 79

10/100 8-Port VPN Router

example, if you have a web server, you would enter the range 80 to 80. Click the Add to List button. Then click the Save Setting button. Click the Exit button.

C.Enter the IP Address of the server that you want the Internet users to access. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. Then check the Enable checkbox for the entry. Consider the examples below:

Application

Start and End

Protocol

IP Address

Enabled

 

 

 

 

 

UT

7777 to 27900

Both

192.168.1.100

X

 

 

 

 

 

Halflife

27015 to 27015

Both

192.168.1.105

X

 

 

 

 

 

PC Anywhere

5631 to 5631

UDP

192.168.1.102

X

 

 

 

 

 

VPN IPSEC

500 to 500

UDP

192.168.1.100

X

 

 

 

 

 

D.Click the Add to List button, and configure as many entries as you like. When you have completed the configuration, click the Save Settings button.

8.I can’t get the Internet game, server, or application to work.

If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an application requires too many ports or when you are not sure which port services to use. Make sure you disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding settings. If the port number that the data enters from does not have port forwarding, then the Router will send the data to whichever PC or network device you set for DMZ hosting.) Follow these steps to set DMZ hosting:

A.Access the Router’s Web-based Utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Setup => Forwarding tab.

B.Disable or remove the entries you have entered for forwarding. To delete an entry, select it and then click the Delete selected application button. Keep this information in case you want to use it at a later time.

C.Click the DMZ Host tab.

D.Enter the Ethernet adapter’s IP address of the computer you want exposed to the Internet. This will bypass the NAT security for that computer. Please refer to “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

Once completed with the configuration, click the Save Settings button.

Appendix A: Troubleshooting

70

Common Problems and Solutions

Image 79
Contents 10/100 8-Port Copyright and Trademarks How to Use this GuideWord definition Table of Contents Appendix E Battery Replacement Appendix a TroubleshootingAppendix B Installing the Linksys VPN Client Appendix D Physical Setup of the Router10/100 8-Port VPN Router VPN Router-to-VPN Router VPN List of Figures21 Setup Tab Advanced Routing 51 VPN tab Client to Gateway Remote Group Setup Figure C-3 MAC Address/Physical Address Welcome IntroductionIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? An Introduction to LANs Networking BasicsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?What is a VPN? VPN Router-to-VPN Router VPN VPN Router to VPN RouterLAN WAN2 WAN1 Getting to Know the RouterBack Panel Power Overview Connecting the RouterConnect a PC Connection InstructionsSetup Tab Setting Up and Configuring the RouterSystem Summary Tab System Management Tab Dhcp TabDomain a specific name for a network of computers Log Tab Port Management TabFirewall Tab VPN TabSystem Summary Tab How to Access the Web-based UtilitySystem Information Network Setting Status ConfigurationPort Statistics VPN Setting Status Firewall Setting StatusLog Setting Status WAN Connection Type LAN SettingDual-WAN / DMZ Setting NetworkPPPoE Point-to-Point Protocol over Ethernet most DSL users Static IPPptp Point-to-Point Tunneling Protocol Transparent Bridge Heart Beat SignalSetup Tab Password Setup Tab TimeTime Setup Tab Forwarding Setup Tab DMZ HostPort Triggering Port Range ForwardingSetup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingStatic IP Dhcp Tab SetupSetup Dynamic IPDual-WAN Network Service DetectionDhcp Tab Status System Management Tab Dual-WANProtocol Binding Bandwidth27 System Management Tab Snmp System Management Tab SnmpDNS Name Lookup System Management Tab DiagnosticPing Firmware Download System Management Tab Factory DefaultSystem Management Tab Firmware Upgrade Firmware UpgradePort Management Tab Port Setup System Management Tab Setting BackupSystem Management Tab Restart 36 Port Management Tab Port Status Port Management Tab Port StatusFirewall Tab General Restrict WEB features38 Firewall Tab Access Rules Firewall Tab Access RulesServices Add a New Access RuleScheduling Website Blocking by Keywords Firewall Tab Content FilterEditing an Access Rule Forbidden DomainsSummary VPN Tab SummaryTunnel Status VPN Clients Status GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup47 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupManual IPSec SetupBit a binary digit IKE with Preshared Key automatic Advanced VPN Tab Client to Gateway With Tunnel Enabled49 VPN tab Client to Gateway 51 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 52 VPN tab Client to Gateway IPSec Setup 10/100 8-Port VPN Router 53 VPN tab Client to Gateway Advanced 54 VPN tab VPN Client Access VPN Tab VPN Client AccessIP Address Range Users SettingVPN Tab VPN Pass Through VPN Tab Pptp ServerMail Log SettingLog Tab System Log Syslog59 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup62 Basic Setup Wizard Host and Domain Name 65 Access Rule Wizard What is Access Rules Access Rule Setup67 Access Rule Wizard Select the Service 69 Access Rule Wizard Select the Destination Linksys Web Site Support TabLogout Tab On Line ManualNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions For Windows 98 and MillenniumFor Windows XP For WindowsFor Windows 98 and Millennium 10/100 8-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupTCP Application Start and End Protocol IP Address EnableCan’t get the Internet game, server, or application to work Application Start and End Protocol IP Address EnabledFor Netscape 4.7 or higher To start over, I need to set the Router to factory defaultNeed to upgrade the firmware For Microsoft Internet Explorer 5.0 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Does the Router support IPX or AppleTalk? Frequently Asked QuestionsWhere is the Router installed on the network? Is IPSec Passthrough supported by the Router?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?How do I get mIRC to work with the Router? How many ports can be simultaneously forwarded?Which modems are compatible with the Router? How can I check whether I have static or Dhcp IP addresses?Figure B-2 Linksys VPN Installation Complete Appendix B Installing the Linksys VPN ClientFigure B-3 Linksys QuickVPN Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilityRack-Mounting the Router Appendix D Physical Setup of the RouterSetting up the Router Placement of the Router10/100 8-Port VPN Router Figure D-3 Wall-Mounting the Router Wall-Mounting the RouterFigure D-4 Wall-Mounting Hardware Replacing a Lithium Battery Appendix E Battery ReplacementAppendix F Upgrading Firmware Figure F-1 Upgrade FirmwareShared Resources Appendix G Windows HelpNetwork Neighborhood/My Network Places Appendix H Glossary 10/100 8-Port VPN Router 10/100 8-Port VPN Router 10/100 8-Port VPN Router SPI Firewall, DES and 3DES Encryption for IPSec VPN Tunnel Appendix I SpecificationsStandards Ieee 802.3, 802.3u Ports DMZ/Internet PortLimited Warranty Appendix J Warranty InformationFCC Statement Appendix K Regulatory InformationNeed to contact Linksys? Appendix L Contact InformationInformation section in this Guide

RV082 specifications

The Linksys RV082 is a robust dual WAN VPN router that stands out in the market for small to medium-sized businesses seeking reliable network connectivity and security. Designed to meet the demands of a dynamic business environment, the RV082 offers a host of features that enhance both performance and reliability.

One of the primary attributes of the RV082 is its dual WAN capability. This feature allows businesses to connect to two different internet connections simultaneously, ensuring uninterrupted internet access. In case one connection fails, the router can automatically switch to the other, minimizing downtime and maintaining productivity. This failover capability is essential for businesses that rely heavily on internet connectivity.

The RV082 also boasts impressive VPN support, enabling secure communication between remote users and branch offices. With support for up to 50 simultaneous VPN connections, the router accommodates a growing workforce that may require access to the company’s network from remote locations. This is particularly beneficial for businesses with telecommuting employees or those that operate across multiple locations.

Security is a paramount concern for any business, and the RV082 addresses this with various built-in security features. It utilizes advanced firewall capabilities, including Stateful Packet Inspection (SPI) and Denial of Service (DoS) protection, safeguarding internal networks from external threats. The router also supports strong encryption protocols such as IPSec and PPTP, ensuring that sensitive data transmitted over the VPN remains secure.

Performance-wise, the RV082 includes eight switched LAN ports, allowing numerous devices to connect directly to the network without the need for additional hardware. This feature simplifies network management and helps keep connectivity organized. Furthermore, the router supports Quality of Service (QoS) prioritization, which allows businesses to allocate bandwidth effectively among different applications and users, promoting seamless performance even during high traffic periods.

The user-friendly web-based interface facilitates easy configuration and management, making it accessible for users with varying levels of technical expertise. Additionally, the RV082’s compact design ensures that it can fit into nearly any office environment without taking up too much space.

In summary, the Linksys RV082 is an excellent choice for businesses looking for a dependable and secure networking solution. With its dual WAN capabilities, extensive VPN support, robust security features, and user-friendly management tools, the RV082 successfully meets the challenging needs of modern business networking.