Linksys RV082 manual Getting to Know the Router, LAN WAN2 WAN1

Page 17

10/100 8-Port VPN Router

Chapter 3: Getting to Know the Router

The Front Panel

The Router’s LEDs, ports, and Reset button are located on the front panel of the Router.

 

LAN

WAN2 WAN1

 

Figure 3-1: Front Panel

 

Ports

 

 

1-8 (LAN)

These eight LAN (Ethernet) ports connect to network devices, such as PCs, print

 

servers, or additional switches.

 

DMZ/Internet (WAN2)

The DMZ/Internet port can be used in two different ways: a second Internet port, or

 

DMZ port. When used as an additional Internet port, it connects to a cable or DSL

 

modem. When used as a DMZ port, it connects to a hub, switch, or public server.

Internet (WAN1)

The Internet port connects to a cable or DSL modem.

LEDs

 

 

Diag

Red. The Diag LED lights up when the system is not ready. The LED goes off when the

 

system is ready.

 

System

Green. The System LED lights up when the Router is powered on. If the LED is flashing,

 

the Router is running a diagnostic test.

 

DMZ: removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet

Chapter 3: Getting to Know the Router

8

The Front Panel

Image 17
Contents 10/100 8-Port Word definition How to Use this GuideCopyright and Trademarks Table of Contents Appendix B Installing the Linksys VPN Client Appendix a TroubleshootingAppendix D Physical Setup of the Router Appendix E Battery Replacement10/100 8-Port VPN Router VPN Router-to-VPN Router VPN List of Figures21 Setup Tab Advanced Routing 51 VPN tab Client to Gateway Remote Group Setup Figure C-3 MAC Address/Physical Address IP a protocol used to send data over a network IntroductionWelcome Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? Use of IP Addresses Networking BasicsAn Introduction to LANs MAC Address Spoofing Why do I need a VPN?What is a VPN? VPN Router-to-VPN Router VPN VPN Router to VPN RouterLAN WAN2 WAN1 Getting to Know the RouterBack Panel Power Overview Connecting the RouterConnect a PC Connection InstructionsSystem Summary Tab Setting Up and Configuring the RouterSetup Tab Domain a specific name for a network of computers Dhcp TabSystem Management Tab Firewall Tab Port Management TabVPN Tab Log TabSystem Information How to Access the Web-based UtilitySystem Summary Tab Port Statistics ConfigurationNetwork Setting Status Log Setting Status Firewall Setting StatusVPN Setting Status Dual-WAN / DMZ Setting LAN SettingNetwork WAN Connection TypePptp Point-to-Point Tunneling Protocol Static IPPPPoE Point-to-Point Protocol over Ethernet most DSL users Transparent Bridge Heart Beat SignalTime Setup Tab TimeSetup Tab Password Setup Tab Forwarding Setup Tab DMZ HostPort Triggering Port Range ForwardingSetup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingSetup Dhcp Tab SetupDynamic IP Static IPDhcp Tab Status Network Service DetectionSystem Management Tab Dual-WAN Dual-WANProtocol Binding Bandwidth27 System Management Tab Snmp System Management Tab SnmpPing System Management Tab DiagnosticDNS Name Lookup System Management Tab Firmware Upgrade System Management Tab Factory DefaultFirmware Upgrade Firmware DownloadSystem Management Tab Restart System Management Tab Setting BackupPort Management Tab Port Setup 36 Port Management Tab Port Status Port Management Tab Port StatusFirewall Tab General Restrict WEB features38 Firewall Tab Access Rules Firewall Tab Access RulesScheduling Add a New Access RuleServices Editing an Access Rule Firewall Tab Content FilterForbidden Domains Website Blocking by KeywordsTunnel Status VPN Tab SummarySummary VPN Clients Status GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup47 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupBit a binary digit IPSec SetupManual IKE with Preshared Key automatic Advanced VPN Tab Client to Gateway With Tunnel Enabled49 VPN tab Client to Gateway 51 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 52 VPN tab Client to Gateway IPSec Setup 10/100 8-Port VPN Router 53 VPN tab Client to Gateway Advanced 54 VPN tab VPN Client Access VPN Tab VPN Client AccessVPN Tab VPN Pass Through Users SettingVPN Tab Pptp Server IP Address RangeLog Tab System Log Log SettingSyslog Mail59 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup62 Basic Setup Wizard Host and Domain Name 65 Access Rule Wizard What is Access Rules Access Rule Setup67 Access Rule Wizard Select the Service 69 Access Rule Wizard Select the Destination Logout Tab Support TabOn Line Manual Linksys Web SiteCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium 10/100 8-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupTCP Application Start and End Protocol IP Address EnableCan’t get the Internet game, server, or application to work Application Start and End Protocol IP Address EnabledNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Passthrough supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?Which modems are compatible with the Router? How many ports can be simultaneously forwarded?How can I check whether I have static or Dhcp IP addresses? How do I get mIRC to work with the Router?Figure B-2 Linksys VPN Installation Complete Appendix B Installing the Linksys VPN ClientFigure B-3 Linksys QuickVPN Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilitySetting up the Router Appendix D Physical Setup of the RouterPlacement of the Router Rack-Mounting the Router10/100 8-Port VPN Router Figure D-3 Wall-Mounting the Router Wall-Mounting the RouterFigure D-4 Wall-Mounting Hardware Replacing a Lithium Battery Appendix E Battery ReplacementAppendix F Upgrading Firmware Figure F-1 Upgrade FirmwareNetwork Neighborhood/My Network Places Appendix G Windows HelpShared Resources Appendix H Glossary 10/100 8-Port VPN Router 10/100 8-Port VPN Router 10/100 8-Port VPN Router Standards Ieee 802.3, 802.3u Ports Appendix I SpecificationsDMZ/Internet Port SPI Firewall, DES and 3DES Encryption for IPSec VPN TunnelLimited Warranty Appendix J Warranty InformationFCC Statement Appendix K Regulatory InformationInformation section in this Guide Appendix L Contact InformationNeed to contact Linksys?

RV082 specifications

The Linksys RV082 is a robust dual WAN VPN router that stands out in the market for small to medium-sized businesses seeking reliable network connectivity and security. Designed to meet the demands of a dynamic business environment, the RV082 offers a host of features that enhance both performance and reliability.

One of the primary attributes of the RV082 is its dual WAN capability. This feature allows businesses to connect to two different internet connections simultaneously, ensuring uninterrupted internet access. In case one connection fails, the router can automatically switch to the other, minimizing downtime and maintaining productivity. This failover capability is essential for businesses that rely heavily on internet connectivity.

The RV082 also boasts impressive VPN support, enabling secure communication between remote users and branch offices. With support for up to 50 simultaneous VPN connections, the router accommodates a growing workforce that may require access to the company’s network from remote locations. This is particularly beneficial for businesses with telecommuting employees or those that operate across multiple locations.

Security is a paramount concern for any business, and the RV082 addresses this with various built-in security features. It utilizes advanced firewall capabilities, including Stateful Packet Inspection (SPI) and Denial of Service (DoS) protection, safeguarding internal networks from external threats. The router also supports strong encryption protocols such as IPSec and PPTP, ensuring that sensitive data transmitted over the VPN remains secure.

Performance-wise, the RV082 includes eight switched LAN ports, allowing numerous devices to connect directly to the network without the need for additional hardware. This feature simplifies network management and helps keep connectivity organized. Furthermore, the router supports Quality of Service (QoS) prioritization, which allows businesses to allocate bandwidth effectively among different applications and users, promoting seamless performance even during high traffic periods.

The user-friendly web-based interface facilitates easy configuration and management, making it accessible for users with varying levels of technical expertise. Additionally, the RV082’s compact design ensures that it can fit into nearly any office environment without taking up too much space.

In summary, the Linksys RV082 is an excellent choice for businesses looking for a dependable and secure networking solution. With its dual WAN capabilities, extensive VPN support, robust security features, and user-friendly management tools, the RV082 successfully meets the challenging needs of modern business networking.