Linksys RV082 manual VPN Tab VPN Client Access, VPN tab VPN Client Access

Page 63

10/100 8-Port VPN Router

Dead Peer Detection (DPD): When DPD is enabled, the RV082 will send the periodic HELLO/ACK messages to prove the tunnel liveliness when both peers of VPN tunnel provide DPD mechanism. Once a dead peer has detected, the RV082 will disconnect the tunnel so the connection can be re-established.

The Interval is the number of seconds between DPD messages. The default is DPD enabled, and default Interval is 10 seconds.

Click the Save Settings button when you finish the settings or click the Cancel Changes button to undo the changes.

VPN Tab - VPN Client Access

Use this page to administer your VPN Client users. Enter the information at the top of the screen and the users you’ve entered will appear in the list at the bottom, showing their status. This will work with the Linksys QuickVPN client only. (The Router supports up to five Linksys QuickVPN Clients by default. Additional QuickVPN Client licenses can be purchased separately. See www.linksys.com for more information.)

Username: Enter the user’s name here.

New Password: Enter the user’s password here.

Confirm New Password: Confirm that password by re-entering it here.

Change Password Allowed: If you want to allow users the right to change their password, click the radio button beside Yes. If not, click the radio button beside No.

Active: Clicking this box will make the new user active.

Add to List: Clicking this button adds the user to the list at the bottom of the screen.

All of these settings can be changed by clicking the user’s name in the box at the bottom half of the screen. The Add to List button changes to Update this user. Click the Update this user button to change the user’s settings.

Delete selected users: You can delete users by clicking their name(s) in the list and then clicking the Delete selected users button. Hold down the CTRL key when selecting multiple users.

Add New: Clicking this button also allows you to add new users to the VPN Client Access list.

Click the Save Settings button to save the settings or the Cancel Changes button to undo your changes.

When you first save these settings, a message will appear, asking if you’d like the Router to automatically change the LAN IP Address to prevent conflicting IP addresses. Clicking Yes will change the LAN IP Address. In the event of an IP conflict, the VPN Client will not connect to the Router.

Chapter 5: Setting Up and Configuring the Router

Figure 5-54: VPN tab - VPN Client Access

54

VPN Tab - VPN Client Access

Page 62 Page 64
Image 63
Page 62 Page 64
Contents 10/100 8-Port How to Use this Guide Copyright and TrademarksWord definition Table of Contents Appendix E Battery Replacement Appendix a TroubleshootingAppendix B Installing the Linksys VPN Client Appendix D Physical Setup of the Router10/100 8-Port VPN Router VPN Router-to-VPN Router VPN List of Figures21 Setup Tab Advanced Routing 51 VPN tab Client to Gateway Remote Group Setup Figure C-3 MAC Address/Physical Address Introduction WelcomeIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? Networking Basics An Introduction to LANsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?What is a VPN? VPN Router-to-VPN Router VPN VPN Router to VPN RouterLAN WAN2 WAN1 Getting to Know the RouterBack Panel Power Overview Connecting the RouterConnect a PC Connection InstructionsSetting Up and Configuring the Router Setup TabSystem Summary Tab Dhcp Tab System Management TabDomain a specific name for a network of computers Log Tab Port Management TabFirewall Tab VPN TabHow to Access the Web-based Utility System Summary TabSystem Information Configuration Network Setting StatusPort Statistics Firewall Setting Status VPN Setting StatusLog Setting Status WAN Connection Type LAN SettingDual-WAN / DMZ Setting NetworkStatic IP PPPoE Point-to-Point Protocol over Ethernet most DSL usersPptp Point-to-Point Tunneling Protocol Transparent Bridge Heart Beat SignalSetup Tab Time Setup Tab PasswordTime Setup Tab Forwarding Setup Tab DMZ HostPort Triggering Port Range ForwardingSetup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingStatic IP Dhcp Tab SetupSetup Dynamic IPDual-WAN Network Service DetectionDhcp Tab Status System Management Tab Dual-WANProtocol Binding Bandwidth27 System Management Tab Snmp System Management Tab SnmpSystem Management Tab Diagnostic DNS Name LookupPing Firmware Download System Management Tab Factory DefaultSystem Management Tab Firmware Upgrade Firmware UpgradeSystem Management Tab Setting Backup Port Management Tab Port SetupSystem Management Tab Restart 36 Port Management Tab Port Status Port Management Tab Port StatusFirewall Tab General Restrict WEB features38 Firewall Tab Access Rules Firewall Tab Access RulesAdd a New Access Rule ServicesScheduling Website Blocking by Keywords Firewall Tab Content FilterEditing an Access Rule Forbidden DomainsVPN Tab Summary SummaryTunnel Status VPN Clients Status GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup47 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupIPSec Setup ManualBit a binary digit IKE with Preshared Key automatic Advanced VPN Tab Client to Gateway With Tunnel Enabled49 VPN tab Client to Gateway 51 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 52 VPN tab Client to Gateway IPSec Setup 10/100 8-Port VPN Router 53 VPN tab Client to Gateway Advanced 54 VPN tab VPN Client Access VPN Tab VPN Client AccessIP Address Range Users SettingVPN Tab VPN Pass Through VPN Tab Pptp ServerMail Log SettingLog Tab System Log Syslog59 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup62 Basic Setup Wizard Host and Domain Name 65 Access Rule Wizard What is Access Rules Access Rule Setup67 Access Rule Wizard Select the Service 69 Access Rule Wizard Select the Destination Linksys Web Site Support TabLogout Tab On Line ManualNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions For Windows 98 and MillenniumFor Windows XP For WindowsFor Windows 98 and Millennium 10/100 8-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupTCP Application Start and End Protocol IP Address EnableCan’t get the Internet game, server, or application to work Application Start and End Protocol IP Address EnabledFor Netscape 4.7 or higher To start over, I need to set the Router to factory defaultNeed to upgrade the firmware For Microsoft Internet Explorer 5.0 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Does the Router support IPX or AppleTalk? Frequently Asked QuestionsWhere is the Router installed on the network? Is IPSec Passthrough supported by the Router?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?How do I get mIRC to work with the Router? How many ports can be simultaneously forwarded?Which modems are compatible with the Router? How can I check whether I have static or Dhcp IP addresses?Figure B-2 Linksys VPN Installation Complete Appendix B Installing the Linksys VPN ClientFigure B-3 Linksys QuickVPN Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilityRack-Mounting the Router Appendix D Physical Setup of the RouterSetting up the Router Placement of the Router10/100 8-Port VPN Router Figure D-3 Wall-Mounting the Router Wall-Mounting the RouterFigure D-4 Wall-Mounting Hardware Replacing a Lithium Battery Appendix E Battery ReplacementAppendix F Upgrading Firmware Figure F-1 Upgrade FirmwareAppendix G Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix H Glossary 10/100 8-Port VPN Router 10/100 8-Port VPN Router 10/100 8-Port VPN Router SPI Firewall, DES and 3DES Encryption for IPSec VPN Tunnel Appendix I SpecificationsStandards Ieee 802.3, 802.3u Ports DMZ/Internet PortLimited Warranty Appendix J Warranty InformationFCC Statement Appendix K Regulatory InformationAppendix L Contact Information Need to contact Linksys?Information section in this Guide

RV082 specifications

The Linksys RV082 is a robust dual WAN VPN router that stands out in the market for small to medium-sized businesses seeking reliable network connectivity and security. Designed to meet the demands of a dynamic business environment, the RV082 offers a host of features that enhance both performance and reliability.

One of the primary attributes of the RV082 is its dual WAN capability. This feature allows businesses to connect to two different internet connections simultaneously, ensuring uninterrupted internet access. In case one connection fails, the router can automatically switch to the other, minimizing downtime and maintaining productivity. This failover capability is essential for businesses that rely heavily on internet connectivity.

The RV082 also boasts impressive VPN support, enabling secure communication between remote users and branch offices. With support for up to 50 simultaneous VPN connections, the router accommodates a growing workforce that may require access to the company’s network from remote locations. This is particularly beneficial for businesses with telecommuting employees or those that operate across multiple locations.

Security is a paramount concern for any business, and the RV082 addresses this with various built-in security features. It utilizes advanced firewall capabilities, including Stateful Packet Inspection (SPI) and Denial of Service (DoS) protection, safeguarding internal networks from external threats. The router also supports strong encryption protocols such as IPSec and PPTP, ensuring that sensitive data transmitted over the VPN remains secure.

Performance-wise, the RV082 includes eight switched LAN ports, allowing numerous devices to connect directly to the network without the need for additional hardware. This feature simplifies network management and helps keep connectivity organized. Furthermore, the router supports Quality of Service (QoS) prioritization, which allows businesses to allocate bandwidth effectively among different applications and users, promoting seamless performance even during high traffic periods.

The user-friendly web-based interface facilitates easy configuration and management, making it accessible for users with varying levels of technical expertise. Additionally, the RV082’s compact design ensures that it can fit into nearly any office environment without taking up too much space.

In summary, the Linksys RV082 is an excellent choice for businesses looking for a dependable and secure networking solution. With its dual WAN capabilities, extensive VPN support, robust security features, and user-friendly management tools, the RV082 successfully meets the challenging needs of modern business networking.
Top Page Image Contents